







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWalk-In Showers & Shower Remodeling in Richardson, TX
A walk-in shower remodel in Richardson typically runs $4,200 to $11,500, and most projects are finished in three to seven working days once materials land. That range covers everything from a curbless tile shower with a frameless glass panel to a full wet-room conversion with a linear drain and built-in bench. What separates one quote from another isn’t the tile you pick; it’s the waterproofing, the slope of the floor, and whether the installer treats a shower like a wet zone or a decorative box. We treat it like a wet zone.
Groundwork Construction Co. of Richardson handles these conversions as part of our larger Bathroom Remodeling work across the city, from the older 1960s ranch homes off Melrose Drive to the newer builds near CityLine. If your current shower has a step-over curb, a foggy glass door, or a pan that pools water in the corner, this is the upgrade we get called about most. One call to (833) 954-4985 reaches a live person, any hour, and you’ll get an upfront number before anyone swings a hammer.
Why Richardson Showers Age The Way They Do
Richardson sits on heavy, expansive clay soil, and that matters more than most homeowners realize. The ground under a slab foundation swells and shrinks with the seasons, and that subtle movement shows up first in small rooms with wet floors. We routinely find hairline grout cracks along shower pans in homes near Heights Park and Prairie Creek, and those cracks are where water gets behind the tile. Add North Texas summers that push attic temperatures past 140 degrees and a bathroom that traps humidity, and you get a shower that looks fine on the surface while the substrate underneath is quietly failing.
Our technicians have up to 12 years of experience reading those early warning signs, and they’ll tell you straight whether a shower needs a tune-up or a full rebuild. Brand partners like Kohler anchor most of our shower packages, and on the glass and hardware side we work with the same suppliers we trust across our fence and outdoor lines, including Ameristar and Jerith for the metal finish components that hold up to humidity.

When You Need Walk-In Showers & Shower Remodeling
You don’t need to wait for a visible failure. Here are the situations where a walk-in conversion is the right call, based on what we see across Richardson every month.
- Someone in the house has trouble stepping over a curb. A 6-inch curb is the number one reason older homeowners stop using their own shower safely. Curbless and low-threshold designs keep the bathroom usable for years, and they’re the most requested change we handle for multigenerational households near the UTD campus and Canyon Creek.
- The glass door won’t stay clean or won’t close right. Hard water in Richardson leaves mineral film that etches into glass over time, and a sagging door usually means the wall framing or the door pivot has shifted. A frameless panel eliminates the track entirely and the problem along with it.
- Water pools in the corner or drains slowly. If the pan doesn’t slope toward the drain, water sits. That’s a rebuild, not a re-caulk job, and it’s the most common reason we tear out a shower that’s less than a decade old.
- You see soft spots, loose tile, or discolored grout lines near the floor. That’s moisture behind the tile. In Richardson’s climate, a failed pan liner can rot framing in a single wet season once it starts.
- The shower is dated and small, and you want the bathroom to feel bigger. A walk-in shower with a glass panel opens up a tight hall bath and adds usable floor space. This is a big driver for resale-conscious homeowners in the 75080 and 75081 ZIP codes.
- You’re remodeling for aging in place or resale value. A shower with a bench, a grab bar, and a low threshold is one of the highest-return bathroom updates for buyers who are planning ahead.
Our Walk-In Showers & Shower Remodeling Process
We keep this simple and predictable. Here’s exactly how a shower project runs from first call to final walkthrough.
- Free estimate and design consult. We come out, measure the space, look at the drain location and framing, and talk through layout options. You get an upfront price, in writing, before you commit. No guesswork, no vague allowances.
- Material selection. Tile, glass, fixtures, drain style, bench or no bench. We’ll steer you toward a Kohler valve and trim package that fits your budget and against tile choices that fight the humidity. The number you see is the number you pay.
- Demo and rough-in. We protect the surrounding floors, tear out the old shower to the studs, and inspect the framing and plumbing. If we find rot or a bad valve, you hear about it the same day, with a price, not a surprise invoice later.
- Waterproofing and pan build. This is the part nobody sees and the part that decides whether the shower lasts. Proper slope, a bonded waterproofing membrane, and a flood test before anything gets covered. Our work is backed by the 730-Day Done Right Promise, so if it’s not right, we make it right.
- Tile, glass, and finish. Tile set, grout, glass panel or door hung, fixtures installed, and a full clean-up. Most jobs are done in a single visit once the waterproofing has cured and the glass is fabricated.
- Final walkthrough. We run the water, check the drain, look for leaks, and walk you through care and sealing. Then we hand it back and stay reachable for two years under the guarantee.
The Safety Side We Won’t Skip
Shower remodels touch plumbing and sometimes electrical, and both are genuinely dangerous to improvise. If your project needs a new GFCI outlet for an exhaust fan, a heated floor circuit, or a relocation of the shower valve’s hot and cold lines, that work goes to a licensed trade partner, not a general crew. We coordinate it and we stand behind the result, but we don’t hand you a breaker box and tell you to have fun. For anyone considering a DIY tear-out in Richardson, call a licensed professional before you cut into a wall with wiring in it.

Walk-In Showers & Shower Remodeling Pricing in Richardson
Here’s what shower projects actually cost in the Richardson market. These are ranges from real quotes, not national averages pulled off a website.
| Project | Typical Range | What Drives Cost |
|---|---|---|
| Shower refresh (re-tile walls, new fixtures, no pan work) | $4,200 – $6,500 | Tile grade, valve and trim package, glass reuse |
| Walk-in conversion with curbless pan and linear drain | $7,500 – $11,500 | Pan rebuild, waterproofing, drain style, floor leveling |
| Frameless glass panel or door install | $1,200 – $2,400 | Tempered glass thickness, hardware finish, custom sizing |
| Full wet-room style rebuild with bench and niche | $10,000 – $16,500 | Layout complexity, built-in seating, tile detail work |
| Grab bars, bench, and aging-in-place additions | $600 – $1,900 | Bar count, blocking, finish selection |
The biggest variables are floor condition, whether the drain can stay where it is, and tile choice. A move of the drain adds labor and a bit of plumbing. A slab-level shower in a Richardson ranch home costs more than a second-floor shower over wood framing because we have to account for the concrete and the drain pitch. Glass adds real money because it’s custom-tempered and fabricated to the opening, not bought off a shelf.
We pair every quote with no-hassle upfront pricing, 0% financing for 18 months, and $1,000 off projects over $10,000. That means a $10,500 walk-in conversion can carry a monthly financing payment instead of a lump-sum hit. Estimates and the design consult are free, and we’ll tell you plainly if a shower refresh is a smarter spend than a full rebuild. Call (833) 954-4985 and we’ll get a number to you fast, with a live person on the line, 24/7.
Repair or Replace: Which Is Cheaper in Richardson?
Repair wins when the pan and waterproofing are intact and only the trim, fixtures, or a single tile is failing. A valve replacement or re-grout in Richardson often runs $350 to $900 and buys you a few more years. Replacement wins the moment moisture has reached the substrate. Once tile is loose or grout is discolored down low, a repair is throwing money at a failing system, and the rebuild is the cheaper long-run decision. We’ll tell you which case you’re in during the free estimate.
Why Homeowners Near Richardson Pick Us
We’re a full-scope construction partner, which means the same team that can rebuild your shower can also tell you honestly when a cabinet line or a door package from Bathroom Remodeling in Richardson makes more sense to bundle into one project. Background-checked, uniformed technicians show up on every job, and calls are answered by a real person around the clock. From foundation to finish line, you’re dealing with one accountable contractor instead of three subs pointing fingers. Our brand relationships across Kohler and the broader Kohler family of products are part of why we can quote a shower with confidence and stand behind it with the 730-Day Done Right Promise: built to last, backed in writing.
FAQs – Walk-In Showers & Shower Remodeling
How much does a walk-in shower remodel cost in Richardson?
A walk-in shower remodel in Richardson typically costs between $7,500 and $11,500, with simple refreshes landing around $4,200 and full wet-room rebuilds reaching $16,500. Floor condition, drain relocation, and glass fabrication are the main cost drivers. Call (833) 954-4985 for an exact quote, and the estimate is free.
Can you convert my existing tub-and-shower combo into a walk-in shower?
Yes, and it’s one of our most common Richardson requests, especially in older ranches where the tub gets used twice a year. We remove the tub, rework the plumbing, build a new sloped pan, and install a low- or zero-threshold entry. Most conversions take three to five working days once materials arrive. Call (833) 954-4985 and we’ll scope it at your free estimate.
How long does a walk-in shower installation take in Richardson?
Most walk-in shower installations take three to seven working days from demo to final walkthrough, and the tile-and-glass finish is often completed in a single visit. Custom glass fabrication is the usual variable, adding a week in some cases. Call (833) 954-4985 and we’ll give you a realistic timeline for your specific bathroom.
Do you waterproof the shower properly, or just tile over the old surface?
We build a properly sloped pan with a bonded waterproofing membrane and a flood test before anything gets covered; we never tile over an old surface. That’s the difference between a shower that lasts a decade and one that fails in two years. Our work is backed by the 730-Day Done Right Promise. Call (833) 954-4985 to talk through your project.
If a walk-in shower is on your list this year, start with a free estimate and design consult. One call to (833) 954-4985 reaches a live person any hour, day or night, and we’ll walk your bathroom, talk honestly about what it needs, and hand you a number with no surprises. Groundwork Construction Co. of Richardson covers the full bathroom scope, from a single shower conversion to a whole-room rebuild, with background-checked, uniformed technicians on every visit. Call today and let’s get it scheduled.
Written by the team at Groundwork Construction Co. of Richardson, serving Richardson.


