







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterSpecialty Roofing in Richardson, TX
Specialty roofing in Richardson, TX is the work that goes beyond a standard shingle replacement: low-slope and flat roof systems, standing seam metal, slate and synthetic slate, cedar shake, tile, and the complicated tie-ins around dormers, additions, and commercial-style flat sections. Most Richardson homeowners need it for one of three reasons – an addition that doesn’t match the pitch of the original house, a flat-roofed section over a porch or garage that keeps pooling water, or an architectural style the neighborhood’s original builder never installed. Call (833) 954-4985 and you’ll reach a live person, day or night.
We do this work under our Roofing service line, which means you get a full-scope contractor who handles the decking, the flashing, the membrane and the finish as one job instead of three subcontractors pointing at each other. Our technicians bring up to 12 years of experience, and every specialty roof we install is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it applies to the complicated roofs too, not just the easy ones.
Richardson is an interesting place to build a specialty roof. The city has a deep bench of 1960s and 1970s ranch homes with low-slope porch roofs, plus a wave of additions and second stories added in the last fifteen years where the new pitch and the old pitch don’t want to meet. Then there’s the hail. Collin County sits in one of the more active hail corridors in North Texas, and we regularly see 1.5-inch and larger stones move through Richardson in the spring – which is hard on flat membrane roofs, harder on metal, and hardest on anything with a seam that wasn’t flashed correctly the first time.

Key Takeaways
- Specialty roofing covers flat and low-slope roofs, metal, slate, synthetic slate, tile, cedar shake, and complex tie-ins – not standard asphalt shingle work.
- Upfront pricing means the number you see is the number you pay, with 0% financing for 18 months and $1,000 off projects over $10,000.
- Every specialty roof is backed by the 730-Day Done Right Promise.
- We work with proven material partners like GAF and Owens Corning for the shingle sections and metal systems, and we’ll spec the membrane and flashing to match what your roof actually does in Richardson weather.
- Calls are answered by a live person, 24/7 – no voicemail, no waiting until Monday.
When You Need Specialty Roofing
Here’s what we actually see on specialty roofing calls in Richardson. If any of these sound familiar, it’s worth a look before the next storm season.
- A flat or low-slope section that pools water. Porches, garages, and the low-slope transitions on mid-century ranch homes in the Heights Park and Prairie Creek areas are common culprits. If water sits on the roof more than 48 hours after a rain, the membrane or the slope is wrong, and it will find a way into the ceiling eventually.
- An addition that doesn’t tie into the original roof cleanly. Richardson has plenty of homes where a second story or a rear addition was added in the 2000s and the roofer lapped new shingles over old ones without a proper cricket or step flashing. Those leaks show up as a brown ring on a ceiling two rooms away from where the water actually enters.
- Hail damage on metal or membrane roofing. After a spring storm rolls through, metal panels can dent and flat membranes can bruise or puncture. Standard shingle hail damage is easy to see from the ground; specialty roofing needs someone up close, which is why we do a physical inspection rather than a drone pass.
- You’re matching an architectural style. If you’re restoring a home with slate or synthetic slate, clay tile, or cedar shake, you need a roofer who knows how those materials are installed, ventilated, and fastened – not someone who’ll tell you to put architectural shingles over the top and call it done.
- You have a complicated roof with valleys, dormers, and multiple pitches. The more intersections a roof has, the more places the flashing has to be right. Most leaks we get called to in Richardson are at a valley or a wall transition, not out in the middle of a field of shingles.
- Your roof is holding an addition that needs structural review. Specialty roofs on additions sometimes carry more weight than the original framing was designed for. We’ll flag it if we see it, and we won’t install a heavier roof over framing that can’t handle it.

Our Specialty Roofing Process
We run specialty roofing the same way on every job, because the work is complicated enough that shortcuts cost more than they save.
- Free estimate and design consult. We come out, get on the roof (or the accessible sections for steep or unsafe areas – see the safety note below), and walk the whole thing with you. You get a written scope, a material list, and a firm number. No-hassle upfront pricing: the number you see is the number you pay. There’s also a $1,000 off projects over $10,000 and 0% financing for 18 months if you need it.
- Material and system selection. For shingle sections we spec GAF or Owens Corning systems with matching underlayment and accessories. For metal, we’ll talk through standing seam versus exposed fastener, panel gauge, and the color finish warranty. For flat, we’ll match the membrane to the roof’s use – TPO or modified bitumen for most residential flat applications, with the detail work specified to the manufacturer’s install standard.
- Decking and flashing inspection. Once the old roof is off, we inspect the decking for soft spots and the existing flashing at every wall, valley, vent, and penetration. We replace what’s failed and photo-document what we find before we close it back up.
- Installation by background-checked, uniformed technicians. Every crew member on your job is background-checked and arrives in uniform. We don’t sub out specialty work to whoever’s available.
- Final walkthrough and warranty registration. We walk the finished roof with you, hand over the manufacturer warranty paperwork, and register the system so the coverage is live. Your 730-Day Done Right Promise is on top of that.
If you’re unsure whether your project is a standard replacement or a specialty job, start with our Richardson service area page and give us a call – we’ll tell you straight.
Safety Note on Roof Access
Specialty roofs are often steep, tall, or both, and a fall from a two-story roof is a life-changing event. We don’t walk homeowners through DIY roof access on this page, and we’d rather you didn’t climb up there yourself. Our technicians are trained for it, insured for it, and equipped for it. If you see something that needs a look, call us and let us take the risk.
Specialty Roofing Pricing in Richardson
Here’s an honest range based on the specialty roofing work we quote in Richardson. Every roof is different, so treat these as planning numbers, not a quote – the free estimate gives you the real figure.
| Project | Typical Range in Richardson | What Drives the Number |
|---|---|---|
| Flat or low-slope section (porch, garage, small addition) | $1,400 – $4,500 | Square footage, membrane type, number of penetrations, decking condition |
| TPO membrane roof (full residential flat) | $2,800 – $7,500 | Size, insulation, parapet and curb detailing |
| Standing seam metal roof | $14,000 – $38,000 | Panel gauge, pitch, roof complexity, color finish warranty, tear-off |
| Synthetic slate or tile roof | $18,000 – $45,000 | Material grade, roof pitch and valleys, underlayment system, weight review |
| Cedar shake roof (new install) | $16,000 – $34,000 | Shake grade and thickness, ventilation, decking, waste factor |
| Complex flashing and tie-in work (dormers, additions, valleys) | $1,200 – $6,500 | Number of transitions, access, whether decking or framing needs repair |
| Hail damage assessment and repair coordination | $250 – $1,500 (repair) | Damage scope; insurance-covered work priced after adjuster review |
What pushes a specialty roof toward the high end in Richardson: an older home with original decking that’s soft in spots, a multi-pitch roof with lots of valleys and dormers, a steep section that needs extra safety setup, or a material upgrade like standing seam over exposed fastener. What keeps it lower: a small flat section with a simple membrane and no penetrations to detail around.
We finance this work at 0% for 18 months, and projects over $10,000 get $1,000 off. Between those two, most specialty roof projects in Richardson end up as a monthly payment that’s easier to plan for than a lump-sum hit. The free estimate includes a design consult, so you see the material options and the numbers side by side before you commit to anything.
If you’ve been burned by a contractor who gave you a verbal number and then “discovered” extra costs mid-job, ask us for the written scope before you sign. That’s how upfront pricing is supposed to work. Call (833) 954-4985 for your free estimate.
Why Groundwork Construction Co. for Specialty Roofing in Richardson
Specialty roofing punishes sloppy work in a way shingle roofs don’t. A one-inch miss on a step flashing detail or a seam that’s not properly welded on a TPO membrane won’t fail next month – it’ll fail in two or three years, right after the original contractor has stopped returning calls. That’s the exact scenario our 730-Day Done Right Promise exists to cover. If it’s not done right, we make it right, and we put that in writing.
Calls are answered by a live person, 24/7. Not a voicemail box, not a callback sheet that gets checked Monday morning. If your roof is leaking during a storm at 10 p.m., you’ll reach someone who can help. That matters more on specialty roofs than anywhere else, because a flat membrane failure or a metal seam leak can do real interior damage overnight.
Every technician on your job is background-checked and arrives in uniform. We specify materials from proven partners – GAF and Owens Corning for the shingle sections and accessory systems, with metal and membrane systems sourced to match the application. We don’t hand you a catalog and let you pick; we walk you through which system actually fits your roof, your Richardson weather exposure, and your budget.
From foundation to finish line, we handle the whole project. That means the framing review if we suspect the roof can’t carry the new material weight, the ventilation calc, the flashing details, the finished roof, and the warranty paperwork. Built to last, backed in writing.
Specialty Roofing FAQ – Richardson
How much does specialty roofing cost in Richardson, TX?
Specialty roofing in Richardson typically runs $1,400 – $7,500 for a flat or low-slope section, $14,000 – $38,000 for standing seam metal, and $18,000 – $45,000 for synthetic slate or tile on a full roof. Complex flashing and tie-in work adds $1,200 – $6,500 on its own depending on how many transitions the roof has. Call (833) 954-4985 for an exact quote – estimates are free and include a design consult.
What’s the difference between specialty roofing and a regular roof replacement?
Specialty roofing covers roof systems and materials that fall outside standard asphalt shingle installation – flat and low-slope membranes, metal, slate and synthetic slate, tile, cedar shake, and the complex flashing and tie-in work that comes with additions, dormers, and multi-pitch roofs. A regular replacement swaps shingles on a standard pitched roof. If your roof has flat sections, architectural materials, or multiple tie-ins, it’s a specialty job. Call us for a free assessment and we’ll tell you which category you’re in.
Can you fix a leaking flat roof in Richardson?
Yes – flat and low-slope roof leaks are one of the most common specialty calls we get in Richardson, especially on porch roofs, garage roofs, and additions where water pools. We locate the actual entry point (which is often not directly above the leak), assess whether the membrane can be repaired or needs replacement, and give you a written number before any work starts. With live-person phone coverage 24/7, we’re reachable when the leak is active. Call (833) 954-4985.
Is specialty roofing covered by a warranty?
Yes. Every specialty roof we install is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. That’s on top of the manufacturer warranty on the materials themselves, which varies by system: shingle systems through GAF and Owens Corning carry their own coverage, and metal and membrane systems each have their own finish and performance warranties. We register the manufacturer warranty for you and hand over the paperwork at the final walkthrough. Call (833) 954-4985 to talk through the warranty on the specific system you’re considering.
Schedule Your Specialty Roofing Estimate in Richardson
If your roof has a flat section that keeps pooling, an addition that’s leaking at the tie-in, or a material that needs a contractor who’s actually installed it before, we’re the call to make. Groundwork Construction Co. of Richardson brings specialty roofing experience, upfront pricing, and a 730-Day Done Right Promise to every job in Richardson. Call (833) 954-4985 for a free estimate and design consult – a live person answers, any hour, any day.
Written by the team at Groundwork Construction Co. of Richardson, serving Richardson.


