







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCustom & Geometric Windows in Richardson, TX
Custom and geometric windows are made to order for an exact opening and an exact look: arch-tops, half-rounds, trapezoids, angled gables, circles, octagons and oversized picture units that a stock window can’t fill. In Richardson, we see the biggest demand in established neighborhoods like Canyon Creek, Prairie Creek and Highland Terrace, where 1960s and 1970s ranch and split-level homes have pitched gables, sloped ceilings and brick arches that were never designed around a standard catalog size. If you’re weighing a one-off unit against a full opening change, start with our Windows & Doors page for the broader picture, then call Groundwork Construction Co. of Richardson at (833) 954-4985 to talk through the specific opening.
What makes this work go right or wrong is measurement and fabrication coordination, not salesmanship. A geometric window is built to a template drawn from your actual rough opening, so the template has to be right before anything gets ordered. We measure, verify the template against the framed opening, and confirm the trim and flashing plan before a single unit goes into production. Every install is covered by our 730-Day Done Right Promise, and our technicians have up to 12 years of experience with angled and arched units.
Key Takeaways
- Geometric windows are fabricated to a template drawn from your opening, so measurement happens before ordering and gets verified twice.
- Richardson’s older ranch and split-level housing stock produces more arched, angled and gable windows than new construction does.
- Expect roughly $850 to $2,600 per custom unit installed, with arch-tops and trapezoids at the higher end because of fabrication and template work.
- Every job is backed in writing by the 730-Day Done Right Promise, and calls are answered by a live person 24/7.

When You Need Custom & Geometric Windows
Most homeowners come to us because a standard window simply won’t fit the hole, or because the window that does fit looks wrong from the street. Here are the situations we run into most in Richardson.
- Your gable window is triangular or trapezoidal. Plenty of Richardson homes built in the 1960s and 1970s have a shaped gable window over the entry or above a vaulted living room. Nobody stocks that shape. It’s fabricated to a template, and the template has to match the actual angle of your roof pitch, not a close guess.
- You have an arched brick or stone opening. The masonry arch is the design feature. Replacing what’s inside it with a rectangular window and infill panels kills the look. We order a true arch-top unit sized to the existing radius and frame it so the brick reads clean from the curb.
- You’re adding a stair landing, reading nook or two-story foyer window. Tall, narrow and angled units show up in these spots, and they need to be sized to the rough opening and confirmed against the stair or roof line before ordering. Getting this wrong means a four-to-eight-week reorder while the wall sits open.
- Your existing custom window has failed and the shape isn’t made anymore. Fogged glass in an arch-top, a rotted curved frame, a hairline crack in a trapezoid pane. We template the existing opening fresh rather than trusting a decades-old drawing, then fabricate a matching replacement.
- You want a round or octagon accent window. Circle and octagon units are common above doors and in gable ends. They’re a straightforward custom order, but the trim and flashing detail around a curved perimeter is where a lot of installs go wrong. That’s the part we care most about.
- A previous window replacement left a shaped opening infilled and it looks patched. We see this in older Richardson neighborhoods where a prior crew dropped in a rectangular unit and boxed the corners. Restoring the original shape with a custom unit fixes the curb appeal in one job.
Our Custom & Geometric Windows Process
Custom and geometric windows are the one window category where the paperwork matters as much as the install. Here’s how we run a job from first call to final walkthrough.
- Site visit and opening measurement. We measure the rough opening, note the wall construction (brick veneer, siding, stucco), check the existing flashing and trim, and photograph the opening from inside and out. For an arched or angled opening we also record the radius or pitch angle so the template matches the house.
- Template drawing and your sign-off. We produce a template drawing for the fabrication shop and walk you through it: shape, dimensions, glass choice, frame material and finish. Nothing goes to production until you’ve approved the drawing in writing. This is where a wrong angle gets caught before it costs you eight weeks.
- Fabrication and scheduling. Custom units typically take longer than stock windows. We give you a real production and delivery window up front with no-hassle upfront pricing so the number you see is the number you pay, and we confirm the delivery date before we schedule the install.
- Template verification on delivery. Before anything is cut, the delivered unit is checked against the opening. If the shape or dimension is off, it’s a fabrication issue and we handle it, not you. That pre-install check is the single biggest thing that separates a smooth custom job from a nightmare.
- Install, flashing and trim. We set the unit square and plumb, flash the perimeter properly, and finish the interior and exterior trim around the custom shape. Curved and angled perimeters need trim made to fit, and that’s done as part of the install, not left as a loose end.
- Final walkthrough and warranty handoff. We test operation on any operable units, check for air and water infiltration, clean up, and walk you through the work. Your installation is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right.
The whole job runs through one contractor, from template drawing to finished trim. If you’re also planning related work like a front entry or exterior door replacement, that can be coordinated under the same schedule, and from foundation to finish line you’re dealing with one accountable company instead of a window vendor and a separate installer pointing at each other.

Custom & Geometric Windows Pricing in Richardson
Custom and geometric windows in Richardson typically run about $850 to $2,600 per unit installed, with most single arch-top or trapezoid replacements landing in the $1,100 to $1,800 range. The number moves with the shape, the size, the glass package and what’s behind the wall, and we quote it upfront before anything is ordered. Here’s what drives the figure.
| Line item | Typical range (installed) | What moves the number |
|---|---|---|
| Single arch-top or half-round unit | $1,000 – $2,000 | Radius size, frame material, glass package |
| Trapezoid or angled gable unit | $1,100 – $2,200 | Angle complexity, height, template work |
| Circle, octagon or oval accent window | $850 – $1,600 | Diameter, glass, trim detail around the curve |
| Oversized custom picture unit | $1,400 – $2,600 | Size, weight, structural header work, glass type |
| Template and fabrication fee | $150 – $400 | Shape complexity, whether a re-template is needed |
| Interior/exterior trim for curved perimeter | $250 – $700 | Material, radius trim needing custom milling |
| Opening modification or header work | $400 – $1,500+ | Whether the rough opening has to change at all |
A few things that push a Richardson quote toward the top of these ranges: brick veneer walls need care around the masonry arch, oversized units may need header reinforcement, and any custom glass package (laminated, tempered, decorative) adds cost. On the other side, if the opening already fits a stock unit, we’ll tell you that plainly instead of upselling a custom window you don’t need. Custom fabrication often runs longer than stock, so build a realistic timeline into your plans.
We price with no-hassle upfront pricing, so the number you see is the number you pay, and there are no surprises after the wall is open. To make a larger project easier to plan, we offer 0% financing for 18 months and $1,000 off projects over $10,000. The free project estimate and design consult is the right first step: we’ll measure, draw the template, and give you a real number before you commit to anything. Call (833) 954-4985 for that free estimate.
FAQs – Custom & Geometric Windows
How much do custom geometric windows cost in Richardson?
Custom and geometric windows in Richardson run about $850 to $2,600 per unit installed, with most single arch-top or trapezoid replacements landing between $1,100 and $1,800. Shape complexity, size, glass package and whether the rough opening needs modification drive the price. Call (833) 954-4985 for an exact quote – estimates are free.
Can you replace a geometric window if the original shape isn’t made anymore?
Yes. We template the existing opening fresh rather than relying on a decades-old drawing, then fabricate a matching replacement unit. That’s the standard path for rotted curved frames and fogged arch-top glass in older Richardson homes. Call (833) 954-4985 and we’ll schedule a measurement.
How long does it take to get custom windows made and installed?
Custom and geometric units typically take longer than stock windows because they’re fabricated to a template, usually several weeks from approved drawing to delivery, plus the install day. We give you a real production and delivery window up front so you can plan around it, and we confirm the date before the wall is opened. Call (833) 954-4985 to talk through your opening.
Is it cheaper to repair or replace a custom geometric window?
Repair is usually cheaper when the frame is sound and only the glass has failed or the hardware needs work; replacement makes more sense when the frame is rotted or the shape no longer matches the opening. We’ll tell you which one you’re looking at before you spend anything. Call (833) 954-4985 – the estimate is free and there’s no pressure either way.
Why Homeowners in Richardson Call Groundwork Construction Co.
We know the housing stock here. Richardson’s older ranch and split-level neighborhoods produce more angled gables and arched openings than the newer build on the west side of town, and our technicians have up to 12 years of experience reading those shapes and getting the template right the first time. Every job carries the 730-Day Done Right Promise, the longest kind of workmanship guarantee in the residential construction space: if it’s not done right, we make it right. Calls are answered by a live person 24/7, so you’re not leaving a voicemail on a Friday night and waiting until Monday. And our technicians are background-checked and arrive in uniform, which is what you’d expect from a company that treats your home like a job site it has to be accountable for.
When you weigh a custom unit, we’ll bring our curated brand partners into the conversation – Andersen and Pella for the window itself, with matching hardware and trim sourced from the same vetted list we use across every trade. You choose on quality, not on what happens to be on a shelf. Take a look at our Richardson service area to see what else we cover, or start with the home page for the full scope of what Groundwork does.
Getting Started
If a window in your Richardson home has a shape that no catalog will match, start with a measurement and a template drawing. That single step tells you whether you need a custom unit, what it will cost, and how long it will take, before you commit to anything. Call (833) 954-4985 for a free project estimate and design consult. We’ll measure the opening, draw the template, and give you an honest number with no surprises, and your installation is backed by the 730-Day Done Right Promise. A live person answers around the clock, so call whenever it’s on your mind.
Written by the team at Groundwork Construction Co. of Richardson, serving Richardson.


