







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Fairview, TX: What It Costs and How Long It Takes
Concrete driveways and concrete work in Fairview, TX typically run $4,500 – $12,000 for a new driveway pour and $5,000 – $14,000 when an existing drive has to come out and be replaced. A standard residential slab takes 2 – 4 working days on site plus a 7-day cure before you park on it, and Fairview’s own permitting department reviews and inspects the work, so add plan review time before the first shovel goes in. Call (833) 954-4985 for a free on-site estimate.
How a Fairview concrete job actually runs, stage by stage

Concrete looks simple from the curb. It isn’t. Here’s the real sequence, what you decide at each point, and roughly how long each stage takes on a Fairview lot.
Day 1 – Layout and demolition. We stake the drive to the width and grade you’ve approved, then break out the old slab if there is one. On the acreage properties off Stacy Road and around the County Road 559 corridor, this often means hauling off a long private drive, so demo alone can eat most of a day. You decide the driveway width here (10 feet is the practical minimum, 12 – 14 feet if you want two cars to pass) and where it meets the apron.
Day 2 – Excavation, grading, and base. We cut down to the subgrade, set the fall so water runs away from the house and any detached garage or shop, then compact a crushed-stone base. This is where Fairview’s clay gets handled. The blackland-prairie soil under most of these lots swells when it’s wet and shrinks when it’s dry, and a drive built on unprepared clay will crack and heave within a couple of seasons. You decide here whether to add a thicker base and rebar for heavier loads like an RV or a trailer.
Day 2 – 3 – Forms, reinforcement, and inspection. We set forms, place rebar or mesh, and coordinate the town inspection before any mud shows up. This is the stage where a Fairview job can get held up, because the town reviews and inspects projects itself rather than leaning on the county. We build the schedule around their review times instead of promising a pour date we can’t hit.
Day 3 – The pour and finish. We pour, screed, and apply the finish you picked: broom, exposed aggregate, or a simple control-joint pattern. You’ll want to confirm expansion joints and control joints here; on a long drive they’re what keeps cracks where you planned them instead of where you didn’t.
Days 4 – 10 – Cure and cure time you have to respect. Concrete keeps gaining strength for weeks. Foot traffic comes after about 24 hours, a car after roughly 7 days, and anything heavy after a month. We cover the curing plan before we leave so nobody parks a truck on it early.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices that actually change your Fairview driveway
Most of the money and most of the long-term satisfaction sit in four decisions. Here’s the honest version of each.
- Thickness: 4 inches vs. 5 – 6 inches. Four inches handles cars and light trucks fine. Five or six inches plus a heavier base is worth it if you park an RV, a boat, or a work trailer, or if a delivery truck routinely turns around in the drive. It adds cost but saves the slab.
- Reinforcement: mesh vs. rebar. Mesh is cheaper and works on flat, well-supported slabs. Rebar on a grid costs more and holds the slab together far better over Fairview’s shifting clay. On long private drives, rebar is the safer call.
- Finish: broom vs. exposed aggregate vs. control-joint pattern. Broom is the standard, grips well when wet, and costs the least. Exposed aggregate looks richer and hides tire marks but is rougher on bare feet and harder to shovel. A scored pattern reads like large tiles and suits the custom homes here without the price of pavers.
- Drainage and grading. A swale, a French drain, or a simple slope away from the foundation. It’s the least glamorous line item and the one most likely to save you a foundation problem later. Skipping it on a large-lot Fairview property is a false economy.
If you’re weighing concrete against a different surface for the whole project, our Driveway & Pavers service covers the wider scope, and the local Driveway & Pavers in Fairview page walks through every option side by side.
What Concrete Driveways & Concrete Work costs in Fairview, TX

Plan on $4,500 – $12,000 for a new concrete driveway and $5,000 – $14,000 for a full replacement with demo and haul-off. Those are real Fairview numbers, not a national average.
| Line item | Typical range |
|---|---|
| New concrete driveway (standard width) | $4,500 – $12,000 |
| Full driveway replacement (demo + pour) | $5,000 – $14,000 |
| Detached garage / shop slab (large-lot add-on) | Quoted per square foot |
Five things push a job toward the top of that range. Length and square footage is the biggest: a long private drive on an acreage lot costs several times what a short suburban apron does. Existing condition matters, since breaking out and hauling off old concrete is real labor. Site access and grading on uneven lots adds machine time. Reinforcement and thickness move the per-yard material cost. Permit and inspection scope through Fairview’s own review adds time and a fee. A written estimate itemizes each of these so the number you see is the number you pay, with no change orders. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off. Call (833) 954-4985 and we’ll price your specific drive.
See the difference
Before
After
Before
After
Before
AfterWhat Fairview homes specifically do to a concrete job
Fairview isn’t Allen or McKinney, and the work reflects it. This is a small, low-density Collin County town in ZIP 75002, and construction here runs through large-lot custom and semi-rural properties rather than tract-subdivision pace. That means long private drives, detached garages and shops that need their own slab, and sometimes septic and well considerations that change where you can pour and how you grade. The town government reviews and inspects projects itself, so plan review and inspection scheduling with Fairview drives the timeline on almost every job we touch here. The soil is the other constant: North Texas blackland-prairie clay expands and contracts with the wet-dry cycle, so slab design and drainage around these large-lot builds get more attention than they would on sandier ground. When a Fairview homeowner is adding a detached structure, they often pair the slab work with ADU Site Prep & Utilities in Fairview to handle grading and utilities in one pass. And when a new build or addition needs exterior doors set to finished grade, homeowners often pair this with Door Installation in Fairview.
Serving Fairview, TX – Our Local Coverage Area
We serve Fairview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Concrete Driveways & Concrete Work in Fairview

Most Fairview concrete driveways take 2 – 4 working days on site, then about 7 days before you drive on them. Fairview’s own permitting and inspection schedule sits on top of that, so the calendar time from approval to finished pour is usually longer than the pour itself. Call (833) 954-4985 for a schedule estimate on your lot.
Yes, new driveway and structural concrete work in Fairview generally goes through the town’s permit and inspection process. The town reviews and inspects projects itself, and we handle pulling the permit and passing the inspection as part of the job. Call (833) 954-4985 and we’ll walk you through what your project needs.
Sometimes, but it’s rarely the right answer. A concrete overlay only works if the base slab is sound and stable, and on Fairview’s shifting clay an old cracked slab usually isn’t. In most cases a full replacement is the honest recommendation, and it’s priced at $5,000 – $14,000. Call (833) 954-4985 for an assessment.
New concrete driveways in Fairview run $4,500 – $12,000, and replacements run $5,000 – $14,000, depending on length, base prep, reinforcement, and grading. We give you a written line-item quote so you can see exactly where the money goes. Call (833) 954-4985 for an exact quote, and the estimate is free.
Every concrete job is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If the work isn’t right, we make it right. Call (833) 954-4985 to schedule your free estimate.
Get a free estimate on your Fairview concrete project
We’ll come out to your property, measure the drive or slab, check the grade and soil, and hand you a written estimate with the line items spelled out. Concrete Driveways & Concrete Work in Fairview is the kind of job where the prep decides the outcome, so we look before we price. We cover all of Fairview and the surrounding area. Call (833) 954-4985 to book your free on-site estimate. A live person answers, day or night.
Written by the team at Groundwork Construction Co.












