







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Fairview, TX: What It Takes and What It Costs
Door installation in Fairview, TX typically runs $650 to $2,800 per exterior door installed, and $350 to $1,400 per interior door, with most single-door projects finished in one to two days. Entry doors and any door that changes the opening size take longer because they go through the town’s own plan review and inspection. Call (833) 954-4985 and we’ll price your door on site, free.
How the Job Actually Runs, Stage by Stage

Door installation is not complicated work, but it is sequence-sensitive. Skip a step and you get a door that sticks, leaks, or lets North Texas wind whistle through the frame. Here’s how we run it on Fairview properties.
Stage 1: Measure and confirm the opening (day 1, about an hour)
We pull the actual rough opening dimensions, check the frame for plumb and square, and look at what’s behind the trim. On older Fairview ranch homes, that’s where we find settled thresholds or a slab that has moved with the clay. This stage decides whether you’re buying a standard-size door or a custom unit. You’ll confirm which door and which swing direction before we order anything.
Stage 2: Order and, where needed, permit (week 1 to 2)
Standard sizes come quickly. Custom entry doors and anything that alters the opening footprint need a permit, and Fairview reviews and inspects projects through its own town process rather than handing it to the county. We handle that submission. You decide the material, finish, and hardware package during this window, since lead times follow your choice.
Stage 3: Demo and prep (day of install, 1 to 3 hours)
Old door and trim come out, the opening gets cleaned and squared, and we check the sill and flashing. On exterior doors this is where rot shows up, especially on south- and west-facing doors that take the summer sun. If the framing is sound, we move straight to setting. If it isn’t, you hear about it before we spend your money.
Stage 4: Set, shim, seal, and hardware (3 to 5 hours)
The door goes in plumb, gets shimmed at the hinges and lock side, and we set the seal and weatherstripping. Hardware gets installed and tested. This is the stage that determines whether the door closes with two fingers or needs a shoulder, so we don’t rush it. You’ll walk it with us before we touch the trim.
Stage 5: Trim, finish, and final inspection (same day to day 3)
Casing and trim go back on, caulk and paint touch-ups get done, and if a permit was pulled, the town inspects the work. Interior doors usually finish the same day. Entry doors with trim and paint can run into a second or third day. Every project we complete is covered by the 730-Day Done Right Promise, so if a door settles or a latch misaligns inside two years, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the decisions on a door project are made before we arrive, and they move the price more than labor does. Here’s the honest read on each.
- Steel entry doors: The budget-friendly exterior choice, roughly $400 to $1,200 for the unit. They hold up well against impact and are common on Fairview’s detached shops and garages. Trade-off: they dent, and once the paint fails they rust fast in our humidity swings.
- Fiberglass entry doors: $700 to $2,500 installed. They won’t dent, rot, or warp, they take stain or paint to look like wood, and they handle North Texas heat better than steel. This is what we recommend for most front doors here.
- Wood entry doors: $1,500 to $2,800 and up. Genuinely beautiful on the custom homes along the acreage tracts, but they need refinishing every few years against sun and moisture. Worth it if you’ll keep up with it.
- Interior doors: Hollow-core MDF runs $350 to $700 installed and suits closets and secondary rooms. Solid-core runs $600 to $1,400 and cuts sound transfer, which matters in a home office or a bedroom near a busy hallway.
- Hardware and finish: A basic knob set and standard hinges are included in most quotes. Upgrading to a keyed handle set, a smart lock, or a multipoint system adds $150 to $600. We’ll spec hardware from brands we trust rather than whatever’s on the shelf.
- Pre-hung versus slab: A pre-hung unit (door plus frame) installs faster and squares more reliably. A slab door reuses your existing frame and costs less but only works if the frame is still true.
What Door Installation Costs in Fairview, TX

Expect $350 to $1,400 per interior door installed and $650 to $2,800 per exterior door installed, with custom entry units running above that. Five variables push a job from the low end to the high end:
- Opening size and condition: A standard 32-inch opening in a sound frame is the low end. A custom width or a rotted frame that needs reframing adds $300 to $900.
- Material grade: Hollow-core interior doors and steel exteriors sit low. Solid wood and fiberglass sit high.
- Number of doors: Per-door cost drops on volume. A whole-house interior door swap of eight doors prices better per unit than a single door, since travel and setup are shared.
- Permit scope: Like-for-like swaps usually don’t need one. New or enlarged openings do, and Fairview’s town review adds time and a permit fee.
- Detached structures: Doors on a shop, barn, or detached garage on a Fairview acreage lot can mean a longer run out to the site and heavier-duty hardware. We price that honestly rather than folding it in later.
Your written estimate is line-item, so you see the door, the labor, the hardware, and the permit as separate numbers. Upfront pricing means the number you see is the number you pay. What’s typically not included: structural repair if we open a wall and find damage, and painting beyond basic touch-up. We flag both before starting. If your door project is part of a full Windows & Doors in Fairview scope, we’ll quote it as one plan.
See the difference
Before
After
Before
After
Before
AfterWhat Fairview Homes Specifically Do to This Job
Fairview is a small, low-density Collin County town where construction runs through large-lot custom and semi-rural projects, not the tract-subdivision pace of neighboring Allen or McKinney. That changes this job in practical ways. The town government reviews and inspects projects itself, so plan review and inspection schedules are set by Fairview’s own permitting calendar, and we build that into the timeline before we promise a finish date. On the acreage tracts, doors on detached shops and outbuildings are routine, and those openings often call for heavier-duty hardware and a longer site visit than a front door on a subdivision lot. Our technicians, who have up to 12 years of experience, know the difference. The blackland-prairie clay under these homes moves with the wet-dry cycle, which is the reason we check thresholds and frames for settlement before ordering anything. And the summer sun and spring hail that hit Fairview’s west-facing entries are why we push fiberglass over steel for exposed front doors. If you’re also reworking the interior, homeowners often pair this with Cabinets & Countertops in Fairview.
Serving Fairview, TX – Our Local Coverage Area
We serve Fairview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Door Installation in Fairview

A single interior door is usually done in a few hours; a single exterior door takes one day, and custom entry doors with trim and paint run two to three days. If a permit is required, add the town’s plan review and inspection time on top. Call (833) 954-4985 for a timeline on your specific door.
Like-for-like replacement in the same opening generally doesn’t require a permit, but a new opening or a change in size does. Fairview runs its own review and inspection process, so the rules are set locally, not by the county. We’ll tell you up front whether your job needs one and pull it for you. Call (833) 954-4985 with your door details.
Yes, in most cases. A same-size replacement fits the existing opening and touches neither plumbing nor framing. Only a widened or relocated opening risks hitting a wall with wiring or a pipe behind it, and we confirm that before demolition. Call (833) 954-4985 and we’ll scope it on site.
Interior doors run $350 to $1,400 installed and exterior doors $650 to $2,800 installed, with custom entry units above that. Material, opening condition, permit scope, and door count are what move the number. Call (833) 954-4985 for an exact quote, free.
Every door we install is backed by the 730-Day Done Right Promise: if it isn’t done right, we make it right. That covers workmanship for two years, on top of the manufacturer’s warranty on the door itself. Call (833) 954-4985 to schedule your free estimate.
Get a Free Door Installation Estimate in Fairview
We’ll come out, measure the opening, look at the frame honestly, and hand you a line-item written estimate for Door Installation in Fairview. No change orders, no vague ballparks. We cover Fairview and the surrounding towns, and our windows & doors service is backed by the 730-Day Done Right Promise. For a door on a detached shop, a new front entry, or a whole-house swap, call (833) 954-4985 and a live person answers.
Written by the team at Groundwork Construction Co.












