







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Fairview, TX: What the Job Actually Involves
Cabinets & countertops in Fairview, TX typically runs $14,000 – $45,000 for a full kitchen’s worth of new cabinetry and stone, and a straight swap in a single room usually takes two to four weeks from order to final caulk line. The biggest variable is whether you’re keeping the plumbing and electrical where they sit. Call (833) 954-4985 for a free on-site estimate, and we’ll tell you honestly which side of that range your kitchen lands on before you commit to anything.
The work breaks down into three pieces: removing the old boxes and tops, setting and leveling the new cabinets, then templating and installing the countertop over them. Cabinets go in first because the stone is cut to fit them. Get them in your head in that order and the schedule stops feeling mysterious.
The process, stage by stage

Stage 1: Measure and order. We measure the room, confirm wall out-of-square and floor slope (common in Fairview’s older ranch homes, where a slab that’s moved a half inch over the decades shows up here), and lock your door style, finish, and box construction. Cabinet lead times run three to six weeks depending on the line. KraftMaid and Wellborn both sit in that window right now. This is also when you decide drawer configuration and whether you want a trash pull-out or a deep pot drawer, decisions that cost less now than later.
Stage 2: Demo and prep, day one. Old cabinets and countertops come out, we cut off the water and power to the affected circuits, and patch and float the wall behind. If a previous owner tiled directly onto drywall, expect that wall to go back to studs. That’s a half-day surprise we price for up front rather than discovering it on your dime.
Stage 3: Set and level the boxes, days two and three. Cabinets get shimmed and scribed to the wall, screwed together into one rigid run, and fastened to studs. Doors and drawers go on temporarily so you can walk the layout and flag anything before the stone gets cut. This is your last easy chance to move a drawer bank.
Stage 4: Template and fabricate the top. The countertop fabricator templates on site once the boxes are set, then cuts and finishes the slab. Cambria and other quartz products run five to ten business days from template to install; natural stone can stretch longer if a slab needs to be sourced. You’ll sign off on the seam locations and edge profile at this stage.
Stage 5: Install, seal, and walkthrough. The top goes down, the sink and faucet get set, the dishwasher and disposal go back in, and we run water and check for leaks before anything gets sealed. Final walkthrough covers drawer alignment, door reveal gaps, and the caulk line where stone meets backsplash.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
Most of the money in this job lives in three decisions. Here’s the honest trade-off on each.
- Stock vs. semi-custom vs. full custom cabinets. Stock boxes come in fixed widths and are the cheapest, but you’ll fill gaps with filler strips. Semi-custom (KraftMaid and Wellborn lines) gives you width increments and a wider door catalog for a modest premium. Full custom buys you any dimension and any finish, at a price that can double the cabinet line.
- Plywood vs. particleboard boxes. Plywood holds screws better over a decade of door slamming and survives a slow leak. Particleboard is cheaper and fine in dry, low-traffic spots, but it swells and never comes back once it’s wet.
- Quartz vs. natural stone vs. laminate tops. Quartz is non-porous and needs no sealing, which matters in a busy kitchen. Granite is one-of-a-kind and heat-tolerant but needs periodic sealing. Laminate is the budget play and has gotten genuinely good, but it can’t take a hot pan.
- Full overlay vs. inset doors. Full overlay is standard, forgiving, and cheaper. Inset doors sit flush inside the frame and read as high-end cabinetry in a custom home, but every box has to be dead square or the gaps show.
- Soft-close hardware. Worth the small upcharge on every door and drawer. It’s the single cheapest way to make a mid-grade cabinet feel like a good one.
What Cabinets & Countertops costs in Fairview, TX

Plan on $14,000 – $45,000 for cabinets & countertops in Fairview. Pulled apart, the line items look like this:
| Line item | Typical range |
|---|---|
| Cabinet installation (labor and set) | $4,000 – $13,000 |
| Countertop installation (fabrication and install) | $2,000 – $6,500 |
| Backsplash | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What pushes a job to the top of the range: a large or L-shaped kitchen with an island, moving the sink or range (which means plumbing and electrical relocation), a wall or soffit that has to come out to open the space, full custom cabinetry, and stone with a lot of edge profile work. A small galley with the sink staying put and semi-custom boxes lands near the bottom.
A written estimate from us lists cabinets, tops, labor, demo, haul-away, and permit fees as separate lines. It doesn’t include appliance purchases, plumbing fixture upgrades, or drywall repair if a hidden leak turns up once the wall opens. We’d rather name those exclusions now than surprise you mid-job. Pricing is upfront and the number you see is the number you pay, backed by the 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Fairview homes specifically do to this job
Fairview is a small, affluent Collin County town in ZIP 75002, and its housing stock is dominated by large-lot single-family homes, many custom-built on one-acre-plus tracts, with older ranch properties and acreage estates mixed in. That shapes this job in ways it doesn’t in denser neighboring suburbs. Custom homes here were often built with non-standard cabinet runs, deeper counters, or a butler’s pantry, so a straight “replace like for like” order usually turns into a custom size or two. And because Fairview runs its own plan review and inspections through the town rather than handing them to the county, permit scheduling drives the calendar. We build inspection windows into the timeline instead of discovering them at the end.
New custom builds and remodels are common here, and homeowners often pair a kitchen cabinet and countertop job with Kitchen Remodeling in Fairview or with Garage Conversion ADU in Fairview when a shop or detached garage is being repurposed. If you’re weighing a bigger addition, a New Detached ADU in Fairview is another project we handle in the neighborhood. Cabinet and top work on these acreage properties sometimes means a service run to a detached structure, which is a planning detail that rarely comes up on a quarter-acre lot. Coverage across Fairview includes the surrounding large-lot properties and nearby communities.
Serving Fairview, TX – Our Local Coverage Area
We serve Fairview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Cabinets & Countertops in Fairview

Most jobs run two to four weeks on site, but the clock starts with cabinet lead time, which is three to six weeks. Tell us your target date and we’ll work backward from it. Call (833) 954-4985 for a schedule that reflects your actual cabinet line.
A straight cabinet and countertop swap usually doesn’t require a permit, but relocating plumbing, electrical, or a wall does, and Fairview reviews those itself. We pull the permits and pass the inspections. Call (833) 954-4985 and we’ll tell you which side of that line your job sits on.
Yes, and that’s the cheaper path. Keeping the sink, range, and wall locations where they are avoids the plumbing and electrical relocation that pushes a job toward the top of the $14,000 – $45,000 range. Call (833) 954-4985 for an exact quote – estimates are free.
Countertop installation typically runs $2,000 – $6,500 depending on square footage, edge profile, and whether you choose Cambria, granite, or laminate. Quartz sits in the middle to upper end because fabrication is precise work. Call (833) 954-4985 to price your specific run.
Our workmanship is covered by the 730-Day Done Right Promise – if it isn’t done right, we make it right. Product warranties come from the cabinet and stone manufacturers on top of that. Call (833) 954-4985 to talk through coverage before you sign anything.
Get a free estimate for cabinets & countertops in Fairview
Call (833) 954-4985 to set up a free on-site estimate for cabinets & countertops in your Fairview kitchen. We measure, confirm what stays and what moves, and hand you a written line-item quote with no-hassle upfront pricing. Live person on the line, 24/7. Project over $10,000? You’re looking at $1,000 off, plus 0% financing for 18 months. Background-checked, uniformed technicians do the work. Every job backed in writing by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.












