







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Heath, TX: What to Expect and What They Cost
Paver driveway installation in Heath, TX runs $7,000 to $18,000 for most residential jobs, with a typical two-car drive landing around $11,000 to $14,000. The work takes three to six days from demolition to final joint sand, depending on square footage and base conditions. That figure includes excavation, a compacted aggregate base, a geotextile layer over our clay soils, the pavers themselves, edge restraint, and polymeric joint sand. Call (833) 954-4985 and we’ll put a real number on your specific driveway, not a ballpark over the phone.
How We Build a Paver Driveway, Stage by Stage

Paver driveways are a sequence, not a single pour. Each stage has to finish before the next one starts, and each one has a decision attached to it. Here’s the honest order of events on a Heath project.
Stage 1: Layout, demo, and haul-off (day 1)
We mark the driveway edges, confirm the slope away from the garage and toward the street or a drainage swale, and saw-cut the existing surface. Old concrete or asphalt comes out and gets hauled off the same day. You decide the paver pattern and border color before demo starts, because the layout has to reflect the final design.
Stage 2: Excavation and base prep (days 1 – 2)
We excavate to a depth that accommodates roughly 6 to 8 inches of compacted base under the pavers. Blackland Prairie clay is expansive, and it moves with our wet and dry seasons. That’s why the base is built in lifts and compacted with a plate compactor between each one, with a woven geotextile separator to keep the clay from pumping up into the aggregate. Skipping this step is the most common reason paver driveways fail here.
Stage 3: Edge restraint and bedding layer (day 2)
Concrete or steel edge restraint goes in along both sides to lock the field in place. Then we screed a 1-inch bedding layer of washed concrete sand to the final grade. You’ll see us checking slope with a level at multiple points during this stage, which is where drainage for flat lots near the lake gets solved.
Stage 4: Paver installation and cuts (days 3 – 5)
Pavers go down in the pattern you selected, working from a string line so the courses stay tight. Border rows get cut to fit against the garage apron, walkway junctions, and any curved edges. On larger Heath driveways with a circular turnaround or a widened approach, this stage can run an extra day.
Stage 5: Compaction, joint sand, and cleanup (day 5 – 6)
We run a plate compactor over the finished field, sweep polymeric sand into the joints, mist it to activate, and do a second compaction pass. Then the site gets cleaned, the driveway gets a final walkthrough with you, and you get the care instructions in writing. Any repairs fall under our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of what separates a good paver driveway from a great one lives in three choices: material, thickness, and pattern. Here’s what you’re actually picking.
- Concrete pavers (the standard): The workhorse choice. Manufactured to consistent size and color, rated for freeze-thaw even though we rarely see a hard freeze here, and available in dozens of finishes. Brands like Belgard are the ones homeowners ask about most. Best value, most predictable result.
- Clay brick pavers: Warmer color variation and a classic look that suits the custom homes in Heath. More expensive per square foot than concrete pavers, and the color range is limited to earth tones and reds.
- Permeable pavers: Open-joint systems with a gravel base that let water drain through. Worth considering on flat lots or near the lake where runoff is a real concern. Higher cost, and they need periodic vacuuming of the joints to keep draining.
- Thickness: 60mm pavers are the residential standard for driveways. 80mm pavers cost more but handle heavier loads and are worth it if you park a heavy truck or trailer regularly.
- Pattern: Herringbone and running bond interlock best and resist shifting. Basketweave and ashlar patterns look more custom but require more cuts, which adds labor.
- Border and accents: A contrasting border course or soldier row adds a finished look and roughly 5 to 10 percent to the material cost.
What Paver Driveways Cost in Heath, TX

Plan on $7,000 to $18,000 for paver driveways in Heath, with the exact number driven by size, access, and the choices above. Here’s how the variables move the price.
- Square footage: The single biggest factor. A standard two-car drive runs $9,000 to $13,000. A three-car drive or one with a turnaround pushes toward the top of the range.
- Existing surface and condition: A clean asphalt or concrete removal is straightforward. A failing slab with deep cracks, root intrusion, or a sub-base that’s already settled means more excavation and more base material.
- Base depth and soil conditions: Expansive clay near the lake sometimes requires deeper excavation and more aggregate, which adds cost but saves you from settling later.
- Material and thickness: Concrete pavers are the baseline. Upgrading to clay brick or permeable systems, or moving to 80mm thickness, adds to the total.
- Complexity: Curves, circular turnarounds, and multiple border colors increase cutting and layout time. Straight rectangular drives are the most economical.
A written estimate itemizes excavation, base material, geotextile, pavers, edge restraint, joint sand, haul-off, and any drainage work. It also states what’s excluded, like relocating irrigation lines or repairing a damaged garage apron if that turns up mid-job. Our pricing is upfront and fixed, so the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Heath Homes Specifically Do to This Job
Heath is a small, affluent lakeside city on Lake Ray Hubbard, and new construction and major remodels here have to clear some of the strictest residential zoning and aesthetic review in the region. That review often comes with minimum square footage requirements, masonry percentages, and architectural standards, so we plan the paver driveway to match the home’s finish level and the neighborhood expectation before a single paver comes off the pallet. On the Lake Ray Hubbard shoreline, setback and shoreline regulations add another layer that can catch out-of-town contractors flat-footed.
The homes we work on here skew toward large, custom-built single-family houses on spacious lots, many from the 1990s onward, with a steady wave of new luxury construction and tear-down rebuilds. Those lots and long driveway runs are exactly where a properly built base and correct slope matter most. We regularly see failing driveways on homes of that era where the original base was too thin for our clay, and we see drainage problems on the flat lots closer to the water where water has nowhere to sheet off during a heavy spring rain. If your paver driveway is part of a full Driveway & Pavers in Heath plan that includes a walkway or front entry, we’ll scope it all together so the finishes match.
If you’re also refreshing the entry or outdoor rooms, homeowners often pair this with Door Installation in Heath or Cabinets & Countertops in Heath while the crew is already on site. We cover the full Heath area, including the neighborhoods around Lake Ray Hubbard, and neighboring Rockwall, Rowlett, Sunnyvale, and Wylie. Our Driveway & Pavers service covers the material and finish side of the work, and this page is the deep dive on paver driveways specifically.
Serving Heath, TX – Our Local Coverage Area
We serve Heath and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Heath

Most paver driveways in Heath take three to six days from demo to final joint sand, with the larger custom driveways on spacious lots running toward the longer end. The base prep and compaction stages eat the most time, and they’re the stages you don’t want rushed. Call (833) 954-4985 for a schedule that fits your specific job.
Whether a paver driveway permit is required in Heath depends on the scope and whether you’re changing the driveway footprint or affecting drainage. Projects that alter the footprint or the site plan often need to clear the city’s review process, and the aesthetic standards here can apply. We handle the permit work and inspections, and we’ll tell you up front what your project requires. Call (833) 954-4985 to talk through your project.
Sometimes, but only if the existing slab is structurally sound, properly sloped, and can accept the added height at thresholds and the garage apron. On most Heath homes, removing the failing base and rebuilding is the right call, because expansive clay underneath a sound-looking slab will keep moving. We’ll evaluate the slab during the on-site estimate. Call (833) 954-4985 to schedule it.
Paver driveways in Heath run from $7,000 to $18,000, depending on square footage, base conditions, material, and complexity. A standard two-car concrete-paver driveway typically lands in the $9,000 to $13,000 range. Call (833) 954-4985 for an exact quote, and the on-site estimate is free.
Laid pavers, the base, and the edge restraint are covered by our 730-Day Done Right Promise. If something we installed isn’t right, we come back and make it right, and that’s in writing. Our technicians have up to 12 years of experience, are background-checked, and arrive in uniform. Call (833) 954-4985 for a free estimate on your paver driveway.
Get a Free Paver Driveway Estimate in Heath
If your driveway is settling, cracking, or you’re planning a custom paver surface to match the finish level of your Heath home, call (833) 954-4985 to schedule a free on-site estimate. We’ll measure the driveway, check the base and slope, and give you a written line-item quote with a fixed price and a realistic schedule. A live person answers the phone around the clock, every day.
Written by the team at Groundwork Construction Co.












