







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Patio Door Installation Costs in Richardson, TX (And Why the Number Varies So Much)
Plan on $2,400 to $9,500 for a patio door installation in Richardson, TX, depending on what the wall behind the old door can carry. A straight swap into a sound opening runs $2,400-$4,800. A door that needs the rough opening reworked lands at $4,200-$7,200. A header upgrade on a pier-and-beam ranch pushes the job to $6,500-$9,500. A quote that skips a foundation check on a 1960s Richardson ranch isn’t a quote, it’s a guess. Call (833) 954-4985 for a free estimate that includes that check.

Why Richardson’s Older Homes Cost More to Fit
Richardson’s core is 1950s-1970s single-story brick ranches, and a lot of them sit on pier-and-beam foundations. That matters for a patio door because the door hangs off the framing above it and bears down on the sill below it. When the foundation moves, the opening goes with it.
North Texas expansive clay soils are the culprit. Clay swells when it takes on water and shrinks hard in a dry summer, and over fifty or sixty years that cycle racks door frames out of square. We regularly find openings on original Richardson Heights blocks that are out of plumb by a half inch or more. A new unit forced into an opening like that will bind, drag the weatherstrip off its stop, and let water past the sill. You’ll notice the sticking before the first heavy rain. You’ll notice the water after.
So the first thing a real installation has to do here is verify the opening. Is the sill flat and level? Is the header straight, or does it sag under its own span? Is the floor system sound beneath the threshold? On a 1950s ranch the answers vary house to house, and that’s before anyone talks about the door itself. Groundwork Construction Co. of Richardson builds that inspection into every bid, which is the difference between a price you can trust and a number that grows once the drywall comes off.
The Three Cost Tiers Most Price Guides Collapse Into One
Generic cost pages hand you a single range and move on. Here’s how the work actually breaks down in Richardson.
- Door unit only (retrofit): The existing opening is square, the sill is sound, and the new unit drops in. This is the clean scenario, and it happens most often on homes where the foundation has been stabilized or the door was replaced once already.
- Rough-opening modification: The opening is close but not close enough. It needs re-framing to square it up, new sill pan flashing, and possibly trim work to close the gaps. Common when switching between a sliding unit and a hinged one, or when the original opening was built for a narrower door.
- Header upgrade: The existing header can’t carry the load the new unit and its frame add, or it’s sagged and needs replacing. This is where the structural work and the real money live. It’s the tier that only shows up after someone crawls under the house.
| Scope | Typical Cost in Richardson |
|---|---|
| Door unit only (sound opening, retrofit) | $2,400-$4,800 |
| With rough-opening modification and re-framing | $4,200-$7,200 |
| With header upgrade on pier-and-beam framing | $6,500-$9,500 |
| Sliding door standard sizing (per unit) | $1,800-$3,500 |
| Hinged (French) door pair | $2,500-$5,200 |
| Sill pan flashing and drainage correction | $300-$900 |
| Header and load-bearing framing work | $1,400-$3,200 |
| Interior and exterior trim finish | $350-$900 |
Related work often comes up while a wall is open. If your project includes a broader window and door scope, that gets priced together so the framing and finish work isn’t done twice.

Andersen and Marvin, Not Builder-Grade
We specify Andersen and Marvin patio door lines. That’s a deliberate choice, not a default.
North Texas sun is unforgiving. A door unit faces west here and it bakes from May through September, then takes a hail strike in spring, then a hard freeze in February. Builder-grade doors weather hard under that cycling: vinyl warps, seals flatten, frames lose their square, and the whole thing starts leaking air within a decade. Andersen and Marvin build their units to hold their shape through temperature swings, and the hardware and weatherstripping hold up to ten or fifteen years of it. On a fifty-year-old brick ranch, the door is often the newest thing in the wall, and it should look that way. We also set patio doors with the same care we bring to Windows & Doors across the metro.
What the 730-Day Promise Means for a Patio Door
A patio door fails in two places: the sill pan flashing, and the frame. The first one leaks quietly and rots the floor system before you see it. The second one drifts out of square as the foundation and the framing settle into each other.
Most installers hand you a 90-day workmanship window, or nothing at all. Groundwork backs every patio door with the 730-Day Done Right Promise. If the sill pan fails or the frame shifts after installation, we come back and make it right. That’s two full years of coverage on the workmanship, which is one of the longest guarantees in residential construction. It matters on a pier-and-beam home in Richardson where the ground moves under the house every season; the door should still close clean two summers after it went in.
What a Real Project Costs, Month by Month
Here’s a real scenario. An Andersen sliding patio door in a 1965 Richardson ranch, with header work because the original was undersized. Unit and install runs around $4,200, header and framing add roughly $1,800, trim and flashing another $600. Total: about $6,600.
With the standing 0% financing for 18 months, that’s about $367 a month. Projects over $10,000 also get $1,000 off, and pricing is upfront, so the number you see at the start is the number you pay at the end. If you’re weighing patio doors against a broader window replacement or impact window upgrade, we’ll run both scopes side by side so you can see what each one buys you. New doors often pair well with a paver patio or a fence refresh, and those are scoped separately when you’re ready.
How We Schedule Work Around Richardson Conditions
North Texas heat straightens out an install crew, and ice in January slows everything down. We plan patio door installs in spring and fall when we can, and we account for the curing and sealing that has to happen around a door in the worst of the summer. When a door frame comes out, the wall gets exposed, so we don’t leave a job open overnight.
Richardson also runs a busy permit and inspection calendar, with post-war housing and infill projects competing for inspector time. We handle the permitting and keep the schedule honest. If a foundation repair is on the horizon, we’ll tell you that before the new door goes in, because installing a patio door over a moving foundation is a way to burn the promise on day one. The work in Richardson also spans everything from pier-and-beam remodels near Central Expressway to the commercial footprint along the Telecom Corridor, and we’re fluent in both.
FAQs
Patio door installation in Richardson runs $2,400-$4,800 for a straight retrofit and $6,500-$9,500 once header work is involved. The variable is the opening, not the door. A 1960s pier-and-beam ranch often needs re-framing before a new unit fits square. Call (833) 954-4985 for an exact quote; estimates are free.
Repair is cheaper when the door is sound but the hardware, rollers or weatherstrip has failed, and that typically runs a few hundred dollars. Once the frame is out of square or water is past the sill, replacement is the better spend. On older Richardson homes, a repair that ignores a racked frame just postpones the replacement. Call (833) 954-4985 and we’ll tell you which side of that line you’re on.
Yes, on any 1950s-1970s ranch in Richardson. Expansive clay soils shift the framing over decades, and a door opening that was square at build time may not be now. Checking the sill and header before installation is how we keep the 730-Day Done Right Promise meaningful. Call (833) 954-4985 to schedule a free estimate that includes that check.
Typically yes, especially where the rough opening, header or framing is changed. Straight like-for-like swaps can sometimes skip the permit, but structural work does not. We handle the permit and inspection on every project we take on in Richardson. Call (833) 954-4985 to talk through your specific door.
Get a Real Number Before You Commit
A patio door is a structural project in a Richardson ranch, not a cosmetic one. Get a free estimate that starts with the opening and the foundation, built on upfront pricing and the 730-Day Done Right Promise. Call (833) 954-4985 today and we’ll put the real number in writing.
Our technicians have up to 12 years of experience, arrive background-checked and in uniform, and your call is answered by a live person 24/7. You can also review our Richardson service area to see how we work across the city, or start at our home page to explore the full scope of what Groundwork Construction Co. of Richardson handles.
Written by the team at Groundwork Construction Co. of Richardson, serving Richardson, TX.
What Our Customers Say
"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."
- Marco Castillo"Change orders were written down and priced before the work happened, every single time. No surprise at the end."
- Keisha Robinson"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."
- Craig Whitaker












