







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterAluminum Fence Cost in Richardson, TX: What You’ll Actually Pay (And Why the 15-Year Math Matters)
Aluminum fence installation in Richardson runs $4,000 to $10,000 for a typical residential job, which works out to roughly $28 to $55 per linear foot installed depending on grade, height, and gate count. Call (833) 954-4985 for a free, no-hassle estimate with upfront pricing. Here’s the part most fence cost guides skip: aluminum and entry-level wrought iron are priced within $5 to $10 per foot of each other at install, but over 15 years in Richardson’s clay-and-UV environment, aluminum costs almost nothing in maintenance while wrought iron needs regular rust remediation. That delta is the number that actually decides which fence is cheaper.

What Makes Richardson a Different Fence Market
Richardson’s core is 1950s to 1970s single-story brick ranches, many on pier-and-beam foundations, with newer two-story infill builds rising on the same small lots. That mix matters for fencing. The older platted blocks near Central Expressway often carry deed restrictions that reference “ornamental metal” fencing, and homeowners assume that language locks them into wrought iron. It doesn’t. A classic wrought-iron-style aluminum fence is visually indistinguishable at street level and satisfies those aesthetic requirements in almost every case. Before you order anything, pull your deed restrictions and confirm the exact language; if it says “ornamental metal” or “black metal fencing,” aluminum in a matte black powder coat typically clears it. If it names wrought iron specifically, ask before you buy.
The other local factor is weather. Expansive clay soil, violent spring hail and wind storms, and summers that push past 100°F all stress a fence. Aluminum’s powder-coat finish handles that UV load better than most painted finishes on wrought iron, which chalk and fade faster here. And the clay soil is why post settings and bracket tolerances decide whether your gate still swings freely two summers from now.
Aluminum Fence Grades: Why Grade A vs. Grade B Changes the Price
The grade distinction is the single most misunderstood part of aluminum fence pricing, and it’s what separates a fence that survives a spring storm from one that leans. Grade A residential fence uses thinner picket and rail walls. Grade B commercial fence uses thicker walls and holds up better under wind load, which in a hail-and-wind market like Richardson is not a marketing point, it’s a structural one.
- Grade A residential: lighter walls, fine for interior property lines and low-wind exposure, budget-friendlier per foot.
- Grade B commercial: thicker picket and rail walls, better wind-load resistance, the right call for exposed corners, long runs, and any gate wider than about 4 feet.
- Height: 4-foot fence costs less per foot than 5-foot or 6-foot; pool-code height and gates add cost.
- Gates and hardware: each gate, self-closing hinge, and latch assembly adds to the total and is where thermal-expansion tolerance really matters.
Aluminum expands and contracts with heat, and in a Richardson July that’s not a theory. Gate frames and post brackets need correct clearance tolerances at install or the gate binds by August. That’s a technical install detail, not a product flaw, and it’s the kind of thing that separates a crew that’s done this in North Texas from one that hasn’t.

Aluminum Fence Cost in Richardson: Line-Item Pricing
Here’s how the numbers break down for a typical Richardson residential aluminum fence job. These are installed prices, materials and labor included, and they’re the same numbers you’ll see on your written estimate. Upfront pricing, no surprises.
| Item | Price Range |
|---|---|
| Aluminum fence installation (typical residential job) | $4,000-$10,000 |
| Installed cost per linear foot (Grade A residential) | $28-$42 per ft |
| Installed cost per linear foot (Grade B commercial) | $40-$55 per ft |
| Gate addition (per gate, with hardware) | $400-$1,200 |
| Wrought iron rust remediation (per treatment, North Texas) | $200-$500 |
For comparison, a vinyl fence on the same lot typically runs $3,500 to $9,000, so aluminum sits just above vinyl at install. What vinyl can’t match is the ornamental look and the HOA-friendly metal aesthetic. If you’re weighing materials side by side, our Fence Installation page covers the full comparison. When you’re ready to price your specific lot, our Fence Installation in Richardson page walks through the install process from survey to final walkthrough.
The 15-Year Math: Aluminum vs. Wrought Iron in Richardson
This is the comparison the generic guides never make. Say you’re fencing a standard backyard. Aluminum at install might run $6,000 and entry-level wrought iron $5,400, so wrought iron looks like the better deal by $600. Now run it out 15 years in Richardson’s climate. Wrought iron in North Texas needs annual inspection and periodic rust remediation, and each treatment runs an estimated $200 to $500. Even at the low end, two or three treatments across 15 years wipes out that $600 difference. At the high end, the maintenance bill far exceeds it.
Aluminum requires essentially zero rust maintenance. The powder coat is the finish. Clean it, and it holds. That’s the 15-year value proposition for most Richardson homeowners, and it’s why we steer people toward aluminum unless they specifically want the heft and welded look of true wrought iron and are prepared to maintain it.
Should you pick aluminum or wrought iron? Aluminum wins on long-term cost and low maintenance in this climate. Wrought iron wins on authentic weight and traditional character, and the cost of owning it includes a standing maintenance line. Both are legitimate choices; the mistake is choosing wrought iron for the price and not budgeting the rust remediation.
What to Look For in a Richardson Aluminum Fence Installer
A fence is only as good as its installation. Three failure modes show up in the first two years on North Texas aluminum jobs: gate sag, post lean in clay soil, and bracket loosening from thermal cycling. Those aren’t product failures, they’re install failures, and they’re exactly what a workmanship guarantee is for. Groundwork Construction Co. of Richardson backs every aluminum fence with the 730-Day Done Right Promise. If it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it covers the installation, not just the product.
Our technicians have up to 12 years of experience, and they’re background-checked and arrive in uniform. Calls are answered by a live person 24/7, so you’re never stuck in a voicemail loop waiting until Monday. We use verified brand partners on our fence work, including Boral and CGI for component quality, so you’re choosing quality, not just availability. Projects over $10,000 qualify for $1,000 off, and 0% financing for 18 months makes a larger fence or gate project easier to budget. Start with a free project estimate and design consult and you’ll get the full number in writing before any work begins.
FAQs
Aluminum fence installation in Richardson typically costs $4,000 to $10,000 for a residential job, or about $28 to $55 per linear foot installed depending on grade and gates. Grade B commercial fence with thicker walls sits at the higher end because it handles wind load better. Call (833) 954-4985 for an exact quote on your lot; estimates are free.
Aluminum is almost always cheaper over 15 years in Richardson, even when wrought iron is $5 to $10 per foot less at install. Wrought iron needs annual inspection and periodic rust remediation at an estimated $200 to $500 per treatment in North Texas, and that maintenance bill usually exceeds the install savings. Call (833) 954-4985 to run the numbers on your fence line.
In most cases, yes. Classic wrought-iron-style aluminum fencing is visually indistinguishable at street level and satisfies deed restrictions that call for “ornamental metal” fencing, which is common on Richardson’s older platted blocks. Check the exact wording before you order, and we’ll help you match a style. Call (833) 954-4985 to talk through your restriction language.
Aluminum expands in 100°F Texas summers, so gate frames and post brackets must be installed with correct clearance tolerances or the gate binds by mid-summer. It’s an install detail, not a product flaw, and it’s why a gate that swings freely in April can stick in July if the tolerances were wrong. Call (833) 954-4985 and we’ll spec your gates correctly from the start.
Ready to price an aluminum fence for your Richardson property? Call (833) 954-4985 for a free project estimate and design consult. Upfront pricing, live person 24/7, and every install backed by the 730-Day Done Right Promise. From foundation to finish line, built to last and backed in writing.
Written by the team at Groundwork Construction Co. of Richardson, serving Richardson, TX.
What Our Customers Say
"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."
- Marco Castillo"Change orders were written down and priced before the work happened, every single time. No surprise at the end."
- Keisha Robinson"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."
- Craig Whitaker












