







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Richardson Homeowners Choose Kohler Construction
We handle independent Kohler construction service in Richardson for homeowners who own Kohler fixtures and want them repaired, replaced, or built into a remodel by a crew that knows the brand. Our technicians have up to 12 years of experience working on Kohler faucets, toilets, cast-iron tubs, and vanities in Richardson kitchens and baths, and we treat every job as a finish-grade installation, not a rough patch.
Richardson’s own brand of service work comes from its housing mix. On the older piers-and-beam blocks near Central Expressway, we’re often working on originals from the 1950s and 1960s that have been maintained or partially updated, then layered with new Kohler fixtures when a family stays put and remodels instead of moving north. That means a lot of our Kohler work here lands in full bathroom redos and tub-to-shower conversions on mature lots, not just fresh builds.
One thing to state plainly: Groundwork Construction Co. of Richardson is an independent construction provider. We’re not affiliated with, authorized by, or endorsed by Kohler. We choose Kohler because it’s a brand we trust to hold up, and we service it the same way we service KraftMaid, GAF, PGT, and Master Halco products. For a free estimate on your Kohler repair or remodel, call (833) 954-4985 and a live person picks up, day or night.
Why Trust Groundwork Construction Co. of Richardson for Your Kohler Construction?

Trust in Kohler work comes down to two things: knowing the parts, and knowing when to stop touching them.
Our technicians have up to 12 years of experience with the Kohler product family, so they’ve seen the ceramic cartridges that stiffen up in single-handle faucets, the fill towers that stick on a Memoirs Comfort Height toilet, and the way a Bellwether cast-iron tub’s finish behaves around the drain after decades of use. That familiarity is the difference between a repair that lasts and a repair that comes back in six months.
We use OEM-compatible and genuine Kohler replacement parts for critical components, so the fit, finish, and function match what came out of the box. Warranty-safe practices matter here: when we’re working on a fixture still under a manufacturer warranty, we document what we find and what we change, so you’re not left explaining the work to the manufacturer later.
Every project carries the 730-Day Done Right Promise. If it’s not done right, we make it right, and we put that in writing. Calls are answered by a live person 24/7, our technicians are background-checked and arrive in uniform, and our pricing is upfront with no surprises. That’s the standard for both a single cartridge swap and a full Kohler bathroom build-out in Richardson.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Kohler Construction Problems We Fix in Richardson
Kohler builds to a high standard, but no fixture is immune to time, mineral content, and North Texas water. Here are the failures we see most often in Richardson homes, along with what causes them.
- Ceramic cartridge wear in Kohler single-handle faucets (Purist, Simplice). A constant drip or a lever that feels stiff or gritty usually points to a worn ceramic cartridge or mineral buildup in the valve body. Richardson’s water has enough mineral content that scale accumulates faster than owners expect, and the cartridge takes the brunt of it. Replacing the cartridge with a genuine Kohler part restores smooth operation without swapping the faucet.
- Cast-iron tub chipping or rusting at the drain and overflow (Bellwether). The drain and overflow area is where water sits and where the enamel takes the most abuse. After years of use, the porcelain can chip and expose the iron underneath, which rusts. Catching it early means a refinish; catching it late means a tub-to-shower conversion or a full replacement.
- Fill valve or flush tower failure on Comfort Height toilets (Memoirs). A Kohler Comfort Height toilet that runs constantly, or that won’t shut off after a flush, usually has a worn fill valve or a flush tower that’s no longer sealing. It’s often a simple valve replacement, but on some models the tower itself needs to be matched to the correct Kohler part number, which is where a generic replacement can go wrong.
- Vanity cabinet finish peeling or swelling near the sink (Tresham, Damask). Moisture that finds its way under the countertop and into the cabinet panel causes the finish to lift and the board to swell. On a Kohler vanity, the fix is usually a repair or refacing if the box is sound, and full replacement if the swelling has compromised the structure.
- Lever and escutcheon looseness on widespread faucets. A handle that wobbles, or a faucet deck that rocks, usually means a worn retaining nut or a missing washer under the escutcheon (the trim plate base). It’s a small fix, but left alone it can lead to a slow leak under the sink. On Richardson’s older slabs, that leak often drips into a cabinet that’s already seen a lot of wear.
One more pattern worth naming: a homeowner notices a constant drip from a Kohler Purist widespread faucet and a sluggish lever. That usually means a worn ceramic cartridge or mineral buildup in the valve. A qualified local pro pulls the handle, replaces the cartridge with a Kohler OEM part, flushes the supply lines, and checks the aerator. Smooth operation comes back without the cost of a new faucet.
Kohler Parts & Our Repair-vs-Replace Approach

Our stance on Kohler parts is simple: source genuine Kohler replacement parts for anything that affects fit and finish, and use quality aftermarket parts only on non-critical components like supply lines.
For cartridges, valves, and trim, we order the Kohler part that matches your model. We don’t claim to stock parts locally. Each job is sourced to the fixture, which means the part number is verified against the model before we show up. It takes a little longer than grabbing a universal part off a shelf, and it’s the reason our repairs hold.
The repair-versus-replace decision is where a lot of Richardson homeowners get talked into the wrong call. Our rule: if the Kohler fixture is structurally sound and the finish isn’t compromised, repairing with OEM parts is usually the better value. Full replacement makes sense when the finish is failing, the model is discontinued, or the cost of the repair climbs past the point where a new fixture serves you longer. We’ll tell you which side of that line you’re on, in plain language, before any work begins.
If you’re weighing a repair against a remodel, call (833) 954-4985. The estimate is free, and upfront pricing means the number you see is the number you pay.
Our Kohler Service Process – Step by Step
- 1
Diagnosis. We identify the exact Kohler model and series, inspect the fixture for wear (cartridge condition, tub enamel at the drain, valve seals, vanity moisture), and take photos so you see what we see. If the fixture is under a manufacturer warranty, we note that before touching anything.
- 2
Repair or install plan. We walk you through what we found, recommend repair or replacement with a reason, and give you the line-item estimate. For installs and remodels, we confirm the fixture, finish, and layout before ordering parts.
- 3
Work. Repairs use genuine Kohler cartridges and valves; installs are set within the manufacturer’s tolerances for rough-in and finish. If it’s a tub-to-shower conversion or vanity install, we protect the surrounding surfaces and keep the work area clean through the day.
- 4
Test and walkthrough. We run the fixture through a full cycle, check for leaks, and confirm the lever action, flush, or door operation, then walk you through it before we leave.
- 5
Warranty and follow-up. The work is covered by the 730-Day Done Right Promise. If something isn’t right, we come back and make it right. That’s the whole policy.
See the difference
Before
After
Before
After
Before
AfterKohler Products We Service & Install in Richardson
We work across the Kohler bathroom family: the Bellwether cast-iron alcove tub, the Memoirs Comfort Height toilet, the Purist and Simplice faucet lines, and the Tresham and Damask vanity collections. That covers full bathroom remodels, tub-to-shower conversions, and vanity installation, including the tile and trim work that goes around them. We handle repair-only jobs on faucets and toilets, and we handle full installs when you’re upgrading a cramped 1960s Richardson bathroom into something that fits the way you actually live. If your fixture is a Kohler model not listed here, call and ask. Our technicians have worked on enough of the line to tell you quickly.
We Also Service These Brands
Groundwork Construction Co. of Richardson is not a single-brand shop. We install and service KraftMaid cabinetry in kitchens, GAF roofing, PGT windows, and Master Halco fencing alongside our Kohler bathroom work. That matters when Richardson’s hail season forces a roof replacement in the same year as a bathroom remodel: one contractor, one warranty, one number to call. Being multi-brand also means we can tell you when a Kohler fixture is the right fit and when it isn’t, without a sales incentive pushing the answer.
FAQs – Kohler Construction Service in Richardson

Yes. A dripping Kohler single-handle faucet is usually a worn ceramic cartridge or mineral buildup in the valve, and replacing the cartridge with a genuine Kohler part restores smooth operation without replacing the faucet. We diagnose first, then confirm the part matches your model. Call (833) 954-4985 for a free estimate.
Stop using it until it’s inspected. Chipping enamel at the drain and overflow exposes the cast iron, which then rusts, and the damage spreads. A refinish may be enough if the chip is small; a tub-to-shower conversion or replacement may be the better call if the iron is compromised. A qualified pro should make that call on site, because the fix depends on how much of the finish is gone.
Most do, but the correct replacement depends on the model. A running Comfort Height toilet is usually a worn fill valve or a flush tower that no longer seals, and on some models the tower must be matched to the right Kohler part number rather than a universal replacement. We verify the model before ordering. Call (833) 954-4985 and we’ll talk through what you’re seeing.
Refacing is worth it when the box is structurally sound and the moisture damage is limited to the finish. If the board has swelled near the sink, replacement usually wins. Kohler vanity collections like Tresham and Damask hold up well when the moisture source is fixed, so we look at the cause first, then recommend reface or replace. Call for a free estimate.
Yes. We install Kohler shower bases and tile surrounds, including tub-to-shower conversions in older Richardson homes. Many of the 1950s and 1960s bathrooms in the city were built around a tub, so the conversion often involves adjusting the rough-in and plumbing before the base goes in. Estimates are free and upfront.
Kohler bathroom work in Richardson runs from a few hundred dollars for a faucet or toilet repair to five figures for a full remodel. Actual cost depends on the fixture, finish, and how much of the room you’re changing. Here’s the range for our most common Kohler jobs:
| Service | Price Range (Richardson) |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
We keep the numbers upfront, and 0% financing for 18 months is available. Call (833) 954-4985 for an exact quote on your Kohler project. Estimates are free.
Book Your Kohler Service in Richardson, TX
Whether it’s a dripping Kohler Purist faucet, a chipped Bellwether tub, or a full bathroom remodel built around Kohler fixtures, Groundwork Construction Co. of Richardson is ready to take the call. Our technicians are background-checked and uniformed, pricing is upfront, and every job is backed by the 730-Day Done Right Promise. Call (833) 954-4985 for a free estimate. A live person answers, 24/7.
Written by the team at Groundwork Construction Co.












