







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Richardson Homeowners Choose Belgard Construction
Groundwork Construction Co. of Richardson installs and repairs Belgard hardscape systems: pavers, retaining walls, and the base preparation that decides whether either one survives North Texas clay. We’re an independent installer, not affiliated with or authorized by Belgard, so our recommendations come from what holds up in Collin County yards rather than a dealer agreement. We work with Belgard systems every week, and our technicians have up to 12 years of experience with hardscape and exterior construction. Every job carries our 730-Day Done Right Promise, and when work needs a live answer at 2 a.m., someone picks up: our calls are answered by a live person, 24/7. For a free estimate, call (833) 954-4985.
Why Trust Groundwork Construction Co. of Richardson for Your Belgard Construction?

Belgard makes several distinct paver families, and each one behaves differently once it’s down in Richardson. Mega-Arbel and Mega-Lafitt are large-format tumbled pavers that need a true flex-base and firm edge restraint to stay in plane; Catalina and Catalina Grana are smaller-format and more forgiving of minor settlement, but they show mottling and efflorescence badly if they’re sealed wet. Our technicians know these differences before they open a pallet, which is usually the point where an eighteen-month-old driveway either starts behaving or starts ruting again.
Matching matters as much as technique. Where a Belgard line is still in production, we use OEM matching pavers, caps and wall units so a repair blends into the surrounding field instead of sitting there like a patch. Where a line is discontinued, we source a close-profile paver and set it in a discreet band rather than eyeball-matching colors and hoping. Our process stays warranty-safe by installing to Belgard’s published base and restraint specifications, and we give you a written scope with upfront pricing, so the number you see is the number you pay. Background-checked, uniformed technicians arrive on every job. Estimates are free at (833) 954-4985.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Belgard Construction Problems We Fix in Richardson
Belgard failures are almost never a paver problem. They’re a base, drainage, or detailing problem wearing a paver-shaped disguise. Here’s what we see most:
- Mega-Arbel driveway migration and joint sand washout. Large-format Mega-Arbel pavers fan outward at the apron and the joints empty after rain when the bedding layer was laid too thin or edge restraint was omitted or set too shallow. The pavers aren’t failing; the field is creeping because nothing holds its edge.
- Polymeric sand failing within a season on Catalina patios. In Richardson’s expansive clay, sand that goes into an uncompacted base or an unstabilized subgrade blows out the first summer. The clay swells and shrinks, the base moves, and the sand has nowhere to lock.
- Efflorescence and color mottling on Catalina and Urbana/Dimensions slabs. White haze and blotchy color usually trace to sealing while the pavers were still damp, or sealing too early after install. Moisture trapped under the sealer pulls mineral salts to the surface.
- Weston Stone and Brisa wall block leaning or bulging. Walls that lean forward generally skipped geogrid or the drainage gravel behind the units. Water builds up, the soil pushes, and the wall walks out. A wall over four feet tall without engineering is a genuine safety hazard, not just an eyesore.
- Sinking patio fields and rutting driveway aprons. Both point to a base compacted in a single lift over unstabilized clay. Re-sanding a sinking Belgard driveway buys one season. It doesn’t fix anything.
Belgard Parts & Our Repair-vs-Replace Approach

We source OEM matching Belgard pavers, caps and wall units for every repair where the line is still in production, and we don’t claim to stock them locally. We confirm the exact series and color before ordering so a repair reads as part of the original field. For discontinued lines, we fit a close-profile paver into a deliberate band, which looks intentional instead of mismatched.
Repair is honest money when the base is sound: reset edge restraint, replace washed-out sand, fix a low spot, reload a wall’s drainage. When the base has failed, we tell you plainly and rebuild that section from stabilized subgrade up. A typical scenario in Richardson: a several-year-old Mega-Arbel driveway starts to rut and the pavers fan outward at the apron. The usual cause is a base compacted in one lift over unstabilized clay, plus missing or shallow edge restraint letting the field creep. The fix is pulling the affected field, re-establishing compacted flex-base in lifts, resetting edge restraint, then re-laying and re-sanding so the line matches the rest of the drive. Call (833) 954-4985 and we’ll tell you which of those two jobs you actually need.
Our Belgard Service Process – Step by Step
- 1
Diagnosis. We map the Belgard series, measure slope and drainage fall, and probe the base depth. That’s how we separate a sand problem from a base problem before quoting.
- 2
Scope and pricing. Written line-item scope showing what gets lifted, what gets reused, and what gets ordered. Upfront pricing means no surprises once the pavers come up.
- 3
Repair or installation. Excavate, stabilize subgrade if needed, compact flex-base in lifts, set edge restraint, lay and cut Belgard units, then pack joints with polymeric sand to Belgard’s spec.
- 4
Verify. We water-test drainage, check joints and wall alignment, and confirm the field is level and true against the surrounding hardscape.
- 5
Back it in writing. Every Belgard job is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterBelgard Products We Service & Install in Richardson
We handle the Belgard paver and wall families that show up in Richardson yards: Mega-Arbel and Mega-Lafitt large-format tumbled pavers, Catalina and Catalina Grana pavers, Weston Stone and Brisa wall block, and Urbana and Dimensions slab and paver systems. Our hardscape work covers three core jobs: paver driveway installation, paver patio installation, and paver and wall repair. Driveway aprons, patio fields, retaining walls and pool surrounds all fall inside that work. We quote each one against your specific series, lot and drainage, not a generic package price. Our phones are answered by a live person, 24/7, at (833) 954-4985.
We Also Service These Brands
Groundwork Construction Co. of Richardson works across a curated set of verified brand partners rather than depending on one manufacturer. Alongside Belgard hardscape, we install KraftMaid cabinetry, Kohler fixtures, GAF roofing systems, and PGT windows. That breadth means one accountable contractor from foundation to finish line, with products sourced from partners chosen for performance, and every scope backed by our 730-Day Done Right Promise.
FAQs – Belgard Construction Service in Richardson

No. We’re an independent Belgard installer and service provider, not affiliated with or authorized by Belgard. Our recommendations rest on what performs in North Texas clay and heat, not on a dealer agreement. Call (833) 954-4985 to talk through your project.
Yes. We use OEM matching Belgard pavers, caps and wall units wherever the series is still in production, and we confirm the exact series and color before ordering. Where a line is discontinued, we source a close-profile paver and set it in a discreet band instead of patch-matching by eye. Estimates are free at (833) 954-4985.
Most repair work takes one to two days on site; a full paver driveway or patio installation typically runs several days depending on square footage, base work and weather. We give you the schedule in writing before we start, and we don’t promise same-day work that a curb-to-house installation can’t deliver.
We cover Mega-Arbel and Mega-Lafitt, Catalina and Catalina Grana, Weston Stone and Brisa wall block, and Urbana and Dimensions slab and paver systems. If you’re not sure of your series, we can identify it from photos and confirm it on site at no charge. Call (833) 954-4985.
Not when work is done to Belgard’s published base, restraint and installation specifications, which is how we install. We keep records of materials and methods on every job. Any manufacturer warranty questions should be confirmed with Belgard directly, and we’ll help you document what’s needed.
Here’s how the ranges stack up in the Richardson market:
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
Clay and drainage conditions on your specific lot move the number more than square footage alone. Call (833) 954-4985 for an exact quote, and estimates are free.
Book Your Belgard Service in Richardson, TX
Whether it’s a rutting Mega-Arbel driveway, a leaning Weston Stone wall, or a patio you want built right the first time, Groundwork Construction Co. of Richardson will give you a straight diagnosis and upfront pricing. Built to last, backed in writing. Call (833) 954-4985 for your free estimate.
Written by the team at Groundwork Construction Co.












