







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterBathtub Replacement in Richardson, TX
Bathtub replacement in Richardson typically runs $1,800 to $6,500 for most homes, with a straight tub-for-tub swap landing around $1,800 – $3,200 and a tub-to-shower conversion climbing toward $4,000 – $6,500 once you factor in tile, waterproofing, and fixture changes. Most replacements are finished in one to three days once materials are on site. If your tub is cracked, leaking at the drain, or you’re stepping over a 16-inch wall you no longer trust, we’re the crew that does this without surprises: call (833) 954-4985 and a live person picks up, day or night.
Richardson has a particular mix of housing stock that shapes how we approach this job. The big postwar ranch neighborhoods around Heights Park and the streets just north of Belt Line carry a lot of original cast iron and steel tubs from the late 1950s through the 1970s, and many of those units are now sitting on 60-year-old galvanized drain lines. Meanwhile the newer builds out toward the President’s Streets and around CityLine often have fiberglass or acrylic drop-ins from the 1990s and early 2000s that are chalking, flexing, or failing at the overflow. Different tub, different failure, different repair plan. That’s the reason we look at the drain assembly and the subfloor before we ever quote a number.
Groundwork Construction Co. of Richardson treats bathtub replacement as a full-scope job, not a surface swap. That means the same crew handles demo, subfloor repair, drain and overflow, waterproofing, and finish. We back it with our 730-Day Done Right Promise, so if something isn’t right, we make it right. This is one piece of the larger Bathroom Remodeling work we do across the area, and if your replacement turns into something bigger, we’re set up to handle it under one contract instead of three.

When You Need Bathtub Replacement
Some tubs can be refinished. Many can’t, and refinishing a tub that’s structurally compromised just hides the problem for a couple of years. Here are the situations we see most in Richardson, along with what actually signals a replacement.
- Visible cracks or holes anywhere but the very top rim. A hairline crack at the overflow or near the drain is usually a leak waiting to happen. On acrylic and fiberglass tubs, cracks spread under weight, and the water gets behind the tub and into the subfloor before you notice. That’s when a $2,000 replacement can turn into a $6,000 subfloor repair.
- Rust stains that keep coming back after cleaning. In older Richardson homes, a persistent rust ring near the drain on a cast iron tub usually means the enamel is gone and the iron is oxidizing. Refinishing helps for a while, but the rust returns, and the metal underneath keeps thinning.
- Flexing or “oil-canning” underfoot. If the floor of the tub deflects when you step in, the tub isn’t supported properly, and either the tub or the subfloor is failing. We see this most often in 1990s fiberglass drop-ins where the original mortar bed has crumbled.
- Standing water or a slow drain you’ve already snaked. If a drain has been cleared and it still backs up, the problem may be a collapsed or root-intruded drain line beneath the slab. Many Richardson homes over 40 years old have cast iron drain lines that develop scale and eventually fail. Replacing the tub is the right time to inspect and, if needed, replace that section of drain.
- A tub you can’t safely step into anymore. A standard tub wall is roughly 15 to 17 inches. If a family member has balance or mobility concerns, a low-threshold shower or a walk-in tub with a door is often the safer choice, and the plumbing rough-in work is similar.
- Water damage on the ceiling or wall below. A stain on the first-floor ceiling under a second-floor bath is a drain or overflow leak until proven otherwise. We open it up, find the source, and repair both sides of the problem.
If you’re weighing a targeted replacement against a larger renovation, the home page gives you the full picture of how we structure projects from a single fixture to an entire room.
Our Bathtub Replacement Process
Our process is built around the parts of the job that go wrong when they’re rushed. We do the same sequence on a straightforward tub swap as we do on a full shower conversion, and we don’t skip steps to save a day.
- On-site assessment and upfront pricing. We look at the tub, the drain and overflow, the valve, the wall surround, and the subfloor through the access panel if there is one. We give you a written price before any work starts, no-hassle upfront pricing, the number you see is the number you pay. If we find something during demo that changes the scope, we stop, show you, and get your approval in writing before we continue.
- Protection and demo. We put down floor protection, seal off the work area, and remove the old tub. Cast iron is heavy, and removing it without damaging the surrounding floor and drywall takes care. We haul the old tub away, so you’re not left with a 300-pound hunk of iron in your garage.
- Subfloor and drain inspection. Once the tub is out, we inspect the subfloor for soft spots or rot and check the drain and overflow for corrosion or cracks. On older Richardson homes, this is where we often find the cast iron drain or a compromised section of subfloor. We repair what we find, then re-level and reinforce so the new tub sits on a solid base.
- Rough-in and valve work. We check the mixing valve, replace it if it’s worn or dated, and set the new drain and overflow. If you’re moving to a shower, this is where the shower pan and waterproofing go in. We use a proper waterproofing membrane behind tile, not just backer board and hope.
- Setting the new tub and surround. We set the tub level and secure it, then install the surround or tile. For an alcove tub, that means proper shimming and a secure flange so water doesn’t get behind the wall. We use trusted brand partners, including Kohler for fixtures and, when the job calls for it, Bathroom Remodeling materials that match the rest of the room.
- Final test, cleanup, and walkthrough. We fill and drain the tub, check for leaks at every joint, run the shower, and do a final walkthrough with you. Most jobs are completed in a single visit once materials are on site, and we leave the space clean and ready to use.
Because we’re a full-scope contractor, a bathtub replacement can also become a door-to-door bathroom update if you decide partway through that you want new tile, a new vanity, or a different layout. We handle the entire scope under one contract, so you’re coordinating with one crew instead of juggling plumbing, tile, and drywall subs. That’s the single-contractor convenience we call from foundation to finish line.

Bathtub Replacement Pricing in Richardson
Pricing here is grounded in what this market actually costs, not national averages. Richardson labor rates run a bit above the Texas metro average because of demand, and anything that requires slab access or a drain line replacement adds to the number. Here’s a realistic range for the most common jobs.
| Job type | Typical range |
|---|---|
| Tub-for-tub swap, standard alcove acrylic or fiberglass | $1,800 – $3,200 |
| Cast iron tub replacement with subfloor repair | $3,000 – $5,500 |
| Tub-to-shower conversion, tiled pan and surround | $4,000 – $6,500 |
| Walk-in tub installation (low-threshold, door) | $3,500 – $8,000 |
| Drain line replacement under the tub | $800 – $2,400 |
| Mixing valve and trim replacement | $350 – $900 |
What affects the price: the material of the old tub (cast iron is heavier to remove and often means rusted drain lines), the condition of the subfloor, whether the drain and overflow need replacement, the material you choose for the new tub, and whether you’re changing the layout. A straight swap in a well-preserved home is on the low end. A conversion that includes tile, waterproofing, and a new drain line sits at the top of the range. We also offer 0% financing for 18 months and $1,000 off projects over $10,000, which makes a full bathroom renovation more accessible without hidden surprises. Every job starts with a free estimate and design consult, and the number on the estimate is the number you pay.
FAQs – Bathtub Replacement
How much does bathtub replacement cost in Richardson?
Bathtub replacement in Richardson costs $1,800 to $3,200 for a standard tub-for-tub swap and $4,000 to $6,500 for a tub-to-shower conversion. The final number depends on the old tub material, subfloor condition, and whether the drain and valve need replacement. Call (833) 954-4985 for an exact quote, and estimates are free.
Can you replace a bathtub in one day?
Yes, a straightforward tub-for-tub swap often finishes in a single day once materials are on site, though jobs that uncover subfloor rot or a failed drain line take two to three days. We tell you which category you’re in after the on-site assessment, and we don’t start until you’ve approved the written price. Call (833) 954-4985 to schedule.
Is it cheaper to refinish or replace a bathtub?
Refinishing runs about $400 to $800 and can be cheaper short-term, but it doesn’t fix structural damage, and refinished coatings typically last a few years before peeling or chalking returns. If your tub is cracked, rusting through, or flexing underfoot, replacement is the better value over time. We’ll tell you honestly which one fits your situation. Call (833) 954-4985 for a free assessment.
What is the 730-Day Done Right Promise?
The 730-Day Done Right Promise means that if any workmanship issue arises from our installation within the two-year period, we make it right at no charge. That’s one of the longest workmanship guarantees in the residential construction space, and it’s backed in writing. Call (833) 954-4985 and we’ll walk you through exactly what it covers.
Bathtub replacement is the kind of job where the details decide whether you have a problem in six months or a bathroom that holds up for decades. Groundwork Construction Co. of Richardson brings background-checked, uniformed technicians, live-person phone coverage around the clock, and upfront pricing to every project. Our technicians have up to 12 years of experience with tub, shower, and drain work. When you’re ready, call (833) 954-4985 for a free estimate and design consult, and we’ll get you a straight answer on what your tub needs.
Written by the team at Groundwork Construction Co. of Richardson, serving Richardson.


