







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Richardson Homeowners Choose Toto Construction
Groundwork Construction Co. of Richardson is an independent Toto service provider. We handle the construction side of Toto ownership in Richardson: pulling and re-setting toilets for tile work, correcting flange heights, building showers and enclosures around Toto fixtures, and getting Washlet seats wired and fed correctly. We work on Toto fixtures every week, and we know the model families and their installation quirks in North Texas homes.
We are not affiliated with, authorized by, or acting as an agent of Toto. Our credibility comes from the work, not a factory badge. As an independent provider, we bring OEM-compatible parts, warranty-safe practices, and the 730-Day Done Right Promise to every Toto job in Richardson. Call (833) 954-4985 and a live person answers, day or night.
Why Trust Groundwork Construction Co. of Richardson for Your Toto Construction?

Toto fixtures reward installers who know them. A Drake CST743 and a Neorest one-piece look nothing alike under the lid, and the wrong approach to either shows up as a rock, a seep, or a cracked base within a year.
Our technicians have up to 12 years of experience, and they know the Toto lineup by part number and behavior. They know a Drake II fill valve wears differently than the older CST744 assembly. They know the tank-to-bowl gasket on an Ultramax II is a common leak point, and they know what a Washlet S550e control board looks like when hard water has been working on it for a decade.
We use genuine Toto fill valves, flappers, gaskets, and Washlet components wherever the model calls for them. Non-critical hardware like supply lines and bolts gets quality aftermarket parts. That mix keeps your warranty intact and the price honest.
Groundwork Construction Co. of Richardson has been in business since 2014. Calls are answered by a live person 24/7, and every technician is background-checked and arrives in uniform.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Richardson
Toto makes reliable fixtures, but Richardson’s water, heat, and housing stock put specific stress on them. Here are the problems we see most often in Toto homes around Richardson:
- Washlet and Washlet+ seats failing at the supply or control board. After years of hard North Texas water, an S550e, C5, or K300 seat stops heating, sprays weakly, or throws an error light. Most of the time it’s scale in the water path or a tired control board, not the seat itself. Confirming the model and the supply connection before ordering parts saves a homeowner real money.
- Drake and EcoPromenade fill valves and flappers wearing out. A CST743 or Promenade that runs and runs is usually a worn flapper or fill valve, not a broken seal. This gets misdiagnosed as a wax-ring leak constantly, and homeowners pay for a pull-and-re-set they didn’t need. Phantom running on a Toto almost always points to the tank, not the floor.
- One-piece Ultramax II and Neorest leaks at the tank-to-bowl gasket or supply fitting. Water staining the tile or subfloor near the base of a one-piece unit is a signature of a tired gasket or a loose supply fitting. One-piece models can’t be tipped and inspected the way a two-piece can, so the diagnosis has to be careful.
- Skirted and elongated Toto bowls not matching the rough-in or flange height during a remodel. A new Toto elongated or skirted bowl going onto a floor that just got thicker tile often sits high, rocks, or stresses the china at the base. The flange has to be extended and the bowl re-set level on a fresh seal, or the install will fail.
- Cracked china at the base from over-tightened closet bolts. Toto bowls are tough but not immune to a ham-fisted install. We see chips and hairline cracks around the bolt holes from a previous crew that torqued down on a rocking floor instead of fixing the flange.
Toto Parts & Our Repair-vs-Replace Approach

Parts get sourced per job from Toto and quality aftermarket suppliers. We don’t claim to stock Toto parts locally, and we won’t pretend a truck full of flappers is sitting down the street.
For Toto work, the split is simple:
- Genuine Toto parts for fill valves, flappers, tank-to-bowl gaskets, and Washlet components. These are the parts the model was engineered around, and they keep your warranty clean.
- Quality aftermarket for non-critical hardware like braided supply lines, closet bolts, and wax or wax-free seals, where the brand doesn’t affect performance.
On repair versus replace, we’re honest. A Drake with a worn flapper gets a flapper. A ten-year-old Washlet with a dead control board and a cracked body usually gets replaced, because chasing parts on a unit that old costs more than it saves. We’ll tell you which side of that line your fixture is on before we touch it. Call (833) 954-4985 for a free estimate and a straight answer.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We identify the exact Toto model first, because a CST744 and a Drake II take different parts. Then we check the symptom against known failure points: is it the fill valve, the flapper, the gasket, the supply, or the Washlet board?
- 2
Repair or install. On a remodel, we pull the fixture, protect the china, and check the flange before anything gets re-set. On a repair, we use genuine Toto parts where the model calls for them and test the fix against the actual problem, not the symptom.
- 3
Test. We run the fixture through a full cycle: fill, flush, seat heat, spray, and shutoff. On a re-set, we check for rock and seep on a fresh seal before the job is called done.
- 4
Warranty. Every Toto job we do is covered by the 730-Day Done Right Promise. If it’s not done right, we make it right, and that’s in writing.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Richardson

We service and install the Toto lines Richardson homeowners actually own and buy. That covers the Drake CST743 and CST744 two-piece and the Drake II, the EcoPromenade and Promenade one-piece toilets, the Washlet and Washlet+ bidet seats (S550e, C5, K300), and the Ultramax II and Neorest one-piece units.
On the construction side, we handle the work around those fixtures: wall prep and blocking, tile, shower enclosures, vanities, and finish carpentry. If you’re remodeling a Richardson bathroom and keeping your Toto, we plan the re-set around the tile schedule so the flange is right before the floor is finished.
We Also Service These Brands
Groundwork Construction Co. of Richardson isn’t a single-brand shop. Alongside Toto, we work with KraftMaid cabinets, Kohler and Cambria finishes, GAF and Owens Corning roofing, and PGT and Andersen windows and doors. That multi-brand range matters in a Richardson remodel, where the Toto fixture has to line up with the vanity, the tile, and the cabinet reveal all at once.
FAQs – Toto Construction Service in Richardson
Yes. We pull the fixture carefully, protect the china, inspect the flange, and re-set it level on a fresh seal. In a typical Toto bathroom remodel, an older Drake or Ultramax II gets pulled for new tile and the crew finds a flange sitting below the finished floor or a worn wax ring, so the toilet rocks or seeps until the flange is extended and the bowl re-set level. Getting that right before the tile goes down is the whole game.
That’s a repair, not a remodel issue. A bidet seat that suddenly stops heating or sprays weakly is usually a supply or control-board problem, and the fix starts with confirming the water connection and the exact model before deciding repair versus replacement. Call (833) 954-4985 and we’ll walk you through what to check.
Probably not. A Toto that runs constantly is almost always a worn fill valve or flapper in the tank, not a wax-ring leak. Phantom running points up, not down. A wax-ring leak shows as water at the base or a soft floor, not a toilet that won’t stop filling. We diagnose the tank first and save you a pull-and-re-set you don’t need.
Usually, but the flange height has to be checked first. Richardson’s 1950s and 1960s ranch homes often have flanges that sit below the finished floor after new tile, and a Toto one-piece or skirted bowl needs a level, properly extended flange or it rocks and stresses the china. We measure the rough-in and flange before you buy, not after.
Yes. We handle the full bathroom in Richardson, so the Toto fixture gets planned around the KraftMaid vanity, the Kohler or Cambria countertop, and the tile schedule together. That coordination is where most remodel problems start, and it’s where we do our best work.
Toto work runs from a single repair up to a full bathroom rebuild, so the range is wide. Here are the standing ranges for the Richardson market:
| Service | Price Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
The number you see is the number you pay, and we back it with $1,000 off projects over $10,000 and 0% financing for 18 months. Call (833) 954-4985 for an exact quote. Estimates are free.
Book Your Toto Service in Richardson, TX
Whether you’re keeping your Toto through a remodel or fixing a Washlet that’s given up, Groundwork Construction Co. of Richardson handles it. Our technicians have up to 12 years of experience, every job is covered by the 730-Day Done Right Promise, and you get upfront pricing with no surprises. Call (833) 954-4985 to schedule your free estimate.
Written by the team at Groundwork Construction Co. of Richardson.












