







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Balch Springs, TX: What It Costs and How Long It Takes
Cabinets and countertops in Balch Springs run $14,000 – $45,000 for a full tear-out and replacement, and most jobs take three to five weeks from demo to final caulk. Cabinet installation alone lands at $4,000 – $13,000, countertop installation at $2,000 – $6,500, and a kitchen island at $3,000 – $10,000. Call (833) 954-4985 and we’ll walk your kitchen and put a written line-item number in your hands. Estimates are free.
How the job actually runs, week by week

Most contractors wave at the schedule and disappear. Here’s the real sequence we run, because you should know what’s happening in your house on day one versus day nine.
Stage 1: Measure and template (day 0, before anything is ordered)
We measure the room, check the walls for plumb and the floor for level, and confirm whether the existing boxes are square enough to reuse. On a 1960s Balch Springs ranch, the answer is often no. You’ll pick door style, finish, and box construction at this stage, because lead times on semi-custom cabinets run three to six weeks and that clock starts now.
Stage 2: Demo and prep (days 1 – 2)
Out come the old cabinets, the old top, and the old backsplash if it’s going. We cap the plumbing stubs, pull the old electrical, and patch and prime what’s behind the cabinets. This is where surprises surface: rotted subfloor near the sink, a wall that isn’t straight, a gas line that needs to move. On older homes here, plan a day of contingency.
Stage 3: Cabinet set (days 3 – 5)
Base cabinets go in first, leveled and shimmed, then uppers and any island or peninsula. Crown, light rail, and filler panels follow. You decide at this stage whether you’re keeping the existing appliance openings or shifting them, because that decision ripples into the countertop template.
Stage 4: Countertop template and install (days 5 – 14)
Natural stone and quartz get templated after the cabinets are set, so the slab is cut to the room as it actually exists. That template takes an hour; fabrication takes five to ten business days. Laminate and butcher block skip the wait and go in the same week.
Stage 5: Hook-up and punch (days 14 – 21)
Sink set, faucet and disposal connected, dishwasher and range slid back and tested, caulk lines run, and the punch list walked with you. That final walkthrough is also where we hand over the 730-Day Done Right Promise in writing, and we stand behind it: if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
What you’ll be choosing between
The money in this job lives in three decisions. Make them deliberately and the budget holds.
- Stock vs. semi-custom vs. custom boxes. Stock cabinets arrive in fixed sizes and run at the low end of the $4,000 – $13,000 cabinet range. Semi-custom (KraftMaid is the line we lean on) fills odd widths and gets you the finish you want, for maybe 20 – 35% more. Full custom is worth it only when the room is genuinely irregular.
- Box construction. Plywood boxes outlast particleboard by a wide margin in a humid North Texas kitchen, especially near the sink and dishwasher. The upcharge is real and so is the lifespan.
- Countertop material. Quartz and granite start around $2,000 – $6,500 installed and shrug off heat and staining; Cambria is a common pick. Laminate is the budget play and shows wear at the seams within a few years. Butcher block is warm and repairable, but it needs re-oiling annually.
- Edge profile and thickness. A standard eased edge costs nothing extra. A built-up 2-inch edge on an island adds visual weight and a few hundred dollars.
- Sink and faucet. An undermount sink needs the countertop fabricator to cut and polish the opening, so pick it before templating, not after.
What Cabinets & Countertops costs in Balch Springs, TX

A full replacement in Balch Springs lands at $14,000 – $45,000. Where you fall inside that band comes down to five things:
- Room size and cabinet count. A galley kitchen with 12 linear feet of boxes sits near the bottom. A 30-foot run with an island pushes toward the top.
- Condition of what’s underneath. Soft subfloor, out-of-plumb walls, or old galvanized plumbing that has to be replaced all add days and dollars.
- Moving plumbing or electrical. Relocating the sink or the range means new supply, drain, and circuit work. Keep them where they are and you save real money.
- Material grade. Stock boxes with laminate land near $14,000. Semi-custom with quartz and a stone island edge gets you toward $45,000.
- Permit scope. A like-for-like swap may not need a permit. Moving a gas line or a wall does, and that pulls in inspection.
A written estimate covers demo, cabinets, countertop fabrication and install, sink and faucet hook-up, and haul-away. It typically does not cover appliance purchase, new flooring, or any structural change discovered mid-job. We price those separately, in writing, before we touch them. No-hassle upfront pricing: the number you see is the number you pay, and 0% financing for 18 months is available, plus $1,000 off projects over $10,000.
See the difference
Before
After
Before
After
Before
AfterWhat Balch Springs homes specifically do to this job
Most of the housing in ZIP 75180 is modest mid-century stock, small brick-veneer and frame ranches from the 1950s through the 1970s, and that shapes this work more than anything else. Those kitchens were built around a 30-inch range and a single wall of cabinets. The walls aren’t plumb, the floors have taken decades of Blackland Prairie clay movement, and the cabinets were often nailed, not screwed. When we template a countertop here, we’re often correcting for a room that has shifted since it was framed, not just cutting a slab. Permitting runs closer to a small town than to Dallas, so a like-for-like swap usually moves quickly, but anything structural gets a closer look. And because so much of this city sits near South Mesquite Creek and the Trinity River bottomlands, moisture is a real factor: we spec plywood boxes and seal the sink cabinet base on the low-lying lots, because particleboard and standing humidity don’t get along. If the wider project is in play, this work is often part of a full Kitchen Remodeling in Balch Springs, and we cover the whole city on our Balch Springs page.
Serving Balch Springs, TX – Our Local Coverage Area
We serve Balch Springs and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Cabinets & Countertops in Balch Springs

Plan on three to five weeks for a full replacement. Demo and cabinet set take about a week, stone fabrication adds five to ten business days, and hook-up and punch add a few more. Call (833) 954-4985 for a schedule built around your specific kitchen.
Often no, if you’re swapping like-for-like and not moving plumbing, gas, or walls. Moving a gas line, relocating the sink, or opening a wall brings the city in for inspection. We pull the permits and pass the inspections when the scope calls for it.
Yes, and it’s the smart way to hold the budget. Keeping the sink and range where they sit avoids new supply, drain, and circuit work. If you want the sink relocated, we’ll quote that separately so you can weigh it.
The full range runs $14,000 – $45,000. Cabinets alone are $4,000 – $13,000, countertops $2,000 – $6,500, and an island $3,000 – $10,000. Call (833) 954-4985 for a free estimate with real line items.
Every job is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If something isn’t right, we return and make it right. Our kitchen remodeling service carries the same coverage, and homeowners often pair this with a Garage Conversion ADU in Balch Springs or a New Detached ADU in Balch Springs while the crew is on site, plus our full Kitchen Remodeling scope if the project grows.
Get a free cabinet and countertop estimate in Balch Springs
We’ll come measure your kitchen, talk through stock versus semi-custom and quartz versus laminate, and hand you a written line-item estimate with no obligation. Calls are answered by a live person 24/7, and our technicians are background-checked and arrive in uniform. Reach us at (833) 954-4985 to schedule your free estimate and design consult.
Written by the team at Groundwork Construction Co.












