







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Chain Link Fence Costs Per Foot in Richardson, TX
Chain link fence in Richardson runs about $12 to $28 per installed foot, which puts a typical residential backyard job in the $3,500-$9,000 range. The spread comes down to two things most cost guides skip: wire gauge and post schedule. An 11.5-gauge residential fence and a 9-gauge commercial perimeter are not the same product, and on Richardson’s expansive clay they don’t age the same either. For an exact number on your lot, call Groundwork Construction Co. of Richardson at (833) 954-4985. Estimates are free, and a live person answers around the clock.
Richardson sits at an unusual crossroads. The 1950s-60s ranch-home core around Richardson Heights is being scraped and rebuilt lot by lot, while the Telecom Corridor’s office and mixed-use footprint keeps commercial contractors busy on renovation and tenant-improvement work. That means fence specs here split down the middle: backyard enclosures on one side, permitted construction-site and property-boundary fencing on the other. The city’s aggressive infill posture also means demolition and inspection are routine, so fence work near an active site has to meet a higher bar than a suburban install in Allen or Frisco would.
Key Takeaways
- Residential chain link: roughly $12-$18 per foot installed; commercial-grade: $18-$28 per foot.
- Lower gauge numbers mean heavier wire. 11.5-gauge is standard residential; 9-gauge is commercial.
- Post diameter and footing depth drive both cost and how the fence holds up in clay soil.
- Hot-dip galvanized mesh costs $1-$2 more per foot but resists rust far longer than electro-galvanized.
- Storm damage and perimeter breaches happen after hours. We answer live, 24/7.

How does wire gauge change the price per foot?
Gauge is the number that decides whether your fence lasts 20 years or starts waving in the wind after three. Counterintuitive but true: the lower the gauge number, the thicker the wire. An 11.5-gauge mesh is the residential standard. A 9-gauge mesh is commercial-grade, noticeably heavier in the hand, and costs more per foot because there’s more steel in it.
On exposed Richardson sites, that difference shows up fast. North Texas wind events push lightweight residential mesh into waves and gaps within 3-5 years, and once the wire stretches it doesn’t spring back. A heavier mesh keeps its tension. Mesh opening size matters too: a 2-inch diamond is standard for both, but tighter weaves cost more and are worth it where you want a visual barrier or small-animal containment.
Why the post schedule matters more than the mesh
You can buy the best mesh on the market and still end up with a fence that leans within a decade if the posts are undersized. This is where cheap bids hide their savings. Commercial-grade chain link uses larger-diameter terminal posts set in deeper concrete footings, with line posts spaced tighter than a residential install. On Richardson’s expansive clay, that post schedule is exactly what prevents the leaning and racking that makes a residential-grade fence look neglected by year ten.
Clay soil expands when it’s wet and shrinks when it dries, and it moves a footing with it. Shallow footings heave. Deeper ones hold. When we quote a chain link job in Richardson, the post spec is on the estimate in writing, not buried in a line item. Our technicians have up to 12 years of experience, and they’ll walk you through the difference before any work starts. Upfront pricing means the number you see is the number you pay.

What chain link costs in Richardson, line by line
Here’s how the numbers break down for a typical Richardson install. These ranges reflect the local market and the gauge and post specs described above.
| Item | Price Range |
|---|---|
| Residential chain link, 11.5-gauge (per foot) | $12-$18 |
| Commercial chain link, 9-gauge (per foot) | $18-$28 |
| Hot-dip galvanized upgrade (per foot) | +$1-$2 |
| Full residential backyard install (typical) | $3,500-$9,000 |
| Gate with hardware and closer | Quoted per opening |
For comparison, a vinyl fence installation usually lands in the same $3,500-$9,000 band, and an aluminum fence runs $4,000-$10,000. Chain link wins on cost per foot, but material choice should follow what the fence has to do: contain pets, screen a property line, or secure a construction perimeter. Our Fence Installation team can price all three side by side so you’re comparing real numbers, not guesses.
Commercial and construction-site chain link in the Telecom Corridor
Richardson’s commercial side plays by different rules. Telecom Corridor renovation projects and infill demo sites need permitted temporary and permanent chain-link perimeter fencing, and those specs are governed by city commercial standards, not the residential fence ordinance. Height requirements, post gauge, and top-rail specs all shift. A fence that’s fine around a backyard won’t pass on a construction perimeter.
Homeowners on lots adjacent to active sites are increasingly inheriting commercial-grade fence requirements through shared-property easements, which catches people off guard when they expected a residential quote. If you’re near a redevelopment block, it’s worth confirming the spec before you sign anything. For chain link work that has to clear the city’s commercial bar, see our Fence Installation in Richardson page, or start with what we do across the board on our home page.
Galvanization: the $1-$2 premium that pays you back
North Texas spring rains and clay-soil moisture are hard on bare steel. Hot-dip galvanized chain link resists rust significantly longer than electro-galvanized, and the $1-$2 per foot premium is recovered in maintenance avoidance over a 10-year horizon. On a 150-foot run, that’s a modest add for a fence that stays clean and rust-free through a decade of Richardson weather. Built to last, backed in writing.
FAQs
Chain link fence in Richardson costs about $12-$18 per foot for residential 11.5-gauge and $18-$28 per foot for commercial 9-gauge. A typical residential backyard job lands in the $3,500-$9,000 range. Call (833) 954-4985 for an exact quote on your lot; estimates are free and priced upfront.
For most Richardson backyards, 11.5-gauge is the practical choice, but 9-gauge is worth the upgrade on exposed sites where wind is a factor. On lots near open fields or along a windy corner, the heavier wire holds tension longer and resists the waving that shows up on light mesh within a few years. Call us and we’ll tell you which spec fits your property.
Residential fences generally follow the city’s residential fence ordinance, while commercial and construction-site perimeter fencing is governed by commercial standards that set height, post gauge, and top-rail requirements. Because permits and demolition inspection are routine in Richardson’s active infill areas, it’s worth confirming your spec before installation. Reach out to (833) 954-4985 and we’ll help you sort out what applies to your property.
Storm damage and construction-perimeter breaches often happen after hours, and we answer calls around the clock with a live person, not voicemail. That means you reach someone the moment a wind event takes down a section of fence or a perimeter breach needs attention. Call (833) 954-4985 anytime and we’ll get you on the schedule.
Get a Straight Answer on Your Chain Link Cost
Whether you need a backyard enclosure or a commercial perimeter that meets Richardson’s standards, Groundwork Construction Co. of Richardson gives you the gauge, the post spec, and the price in writing before any work starts. Every project is backed by our 730-Day Done Right Promise, upfront pricing, and 0% financing for 18 months, plus $1,000 off projects over $10,000. Call (833) 954-4985 for a free estimate and design consult. A live person answers 24/7.
Written by the team at Groundwork Construction Co. of Richardson, serving Richardson, TX.
What Our Customers Say
"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."
- Marco Castillo"Change orders were written down and priced before the work happened, every single time. No surprise at the end."
- Keisha Robinson"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."
- Craig Whitaker












