







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Lucas, TX: What It Costs and How Long It Takes
A Chain Link Fence in Lucas, TX typically runs $3,500 to $9,000 for the acreage properties that dominate this town, and most installs are finished in two to three working days once the layout is set. You’re usually fencing a shop yard, a dog run off the back of the house, or a paddock line rather than a tight suburban lot, which means longer runs and more posts. Call (833) 954-4985 to schedule a free on-site estimate.
How we run a chain link job in Lucas, start to finish

A chain link fence is one of the few construction jobs where the sequence barely changes from property to property. What changes is the distance between corners and what’s underground. Here’s the real order of operations.
Stage 1: Walk the line and call for locates (day 1)
We pace the run with you and mark terminal posts, corner posts, and gate posts. Then we call in the utility locate before anyone turns a shovel. On Lucas acreage that step matters more than it does in town, because a water line to a barn or a propane run to an outbuilding may not show up where you’d expect. You decide the gate widths and which side faces out at this stage. It’s the one decision that’s expensive to change later.
Stage 2: Layout and string line (day 1)
Posts get set on 8- or 10-foot centers depending on height and wind exposure, and we pull a string line so the top of the fence reads straight from the road. We confirm property lines against your plat or survey before the first hole. Nobody wants to dig twice.
Stage 3: Set posts in concrete (day 1 into day 2)
Terminal, corner, and gate posts get concrete footings; line posts can be driven or set depending on soil. Our technicians have up to 12 years of experience reading Blackland Prairie clay, and this is where that experience shows. The clay swells when it’s wet and shrinks hard when it’s dry, so footings here get set deeper and bell out at the base to resist frost-heave-style movement through the seasons. You don’t need to be on site for this stage.
Stage 4: Rails, mesh, and tension (day 2 into day 3)
Top rail goes up, mesh gets stretched and tied off with tension bars and bands, and the bottom follows the grade rather than floating. That last point matters on rolling lots: we either rack the mesh to the slope or step the panels, and you pick which one you want when the ground is uneven.
Stage 5: Gates, walk-through, cleanup (day 3)
Gates get hung, latched, and swung. We walk the whole run with you, tighten anything loose, and haul off the spoil and offcuts. Most jobs are done in a single visit to the property after materials land, with the concrete cure being the only thing that runs past the final walk.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
- Galvanized vs. vinyl-coated mesh: Bare galvanized is the cheapest per foot and holds up fine in North Texas sun. Vinyl-coated (black or green) costs more but disappears against a treeline and stays cooler to the touch. For a Lucas property backing onto woods, coated usually looks better from the house.
- Gauge and height: 11.5-gauge is the light residential standard; 9-gauge is heavier and worth it on a dog run or anywhere livestock lean on the fence. Five-foot is the default; six-foot runs more per foot but keeps deer on the outside longer.
- Post and rail schedule: 1 5/8″ line posts with 1 7/8″ terminals is the everyday spec. Bigger is available and only pays off on long, exposed runs.
- Brands that matter: Master Halco mesh and posts are the workhorse standard, and Ameristar gates and hardware are a solid upgrade where the gate gets used daily. We’ll spec either into a quote so you can see the price difference line by line.
- Gates: Walk gates, drive gates, and double swing gates for equipment access. A wider drive gate adds real cost because of the posts and hardware, so decide access needs before we set anything.
What Chain Link Fence costs in Lucas, TX

Plan on $3,500 to $9,000 for a chain link fence in Lucas, with the low end matching a short 4-foot run around a yard and the high end covering several hundred feet at 6-foot height with a drive gate. Here’s what moves the number:
| Factor | Low end | High end |
|---|---|---|
| Linear feet | Under 150 ft | 400+ ft |
| Height and gauge | 4 ft, 11.5-gauge | 6 ft, 9-gauge |
| Gate count | One walk gate | Walk gate plus double drive gate |
| Terrain | Flat and open | Slope or heavy brush clearing |
| Soil and footage | Standard footing depths | Deeper footings on expansive clay |
A written estimate from us lists footage, post schedule, gauge, gate sizes, footing depths, and clearing separately, so you can trim scope where you want to. What it won’t include unless we flag it: brush removal, stump grinding, or moving an existing fence line out of the way. Those get priced as their own line so nothing appears mid-job.
See the difference
Before
After
Before
After
Before
AfterWhat Lucas homes specifically do to this job
Lucas is a Collin County town built around large-lot properties, and that shape changes a fence job. Acreage often comes with outbuildings and workshops that sit outside the reach of municipal utilities, so before we set a single post we’re looking at where the septic field, the propane run, and the private well line actually lie. A fence that crosses a drain field is a call-back waiting to happen, and a post driven through a well line is a much worse day. This is scope that simply doesn’t exist in neighboring Allen or Fairview. The Blackland Prairie clay underneath makes it real too: the soil swells with spring rain and shrinks through dry summers, so footings get set deeper and the layout accounts for ground that will move over the first couple of years. Properties here tend to be custom homes on 1- to 5-acre lots built from the 1980s through the 2010s, plus a growing number of rebuilds on older farmhouse sites, and we scope the fence to match the era and the ground rather than to a default suburban spec. We cover the whole of Lucas and the surrounding area.
Serving Lucas, TX – Our Local Coverage Area
We serve Lucas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Chain Link Fence in Lucas

Most Lucas chain link fences take two to three working days once materials are on site, with the concrete footings needing a day or two to cure before gates go on. Longer runs on acreage stretch to three or four days. Call (833) 954-4985 and we’ll give you a realistic window with your estimate.
Permit requirements depend on height, location on the lot, and whether you’re inside a subdivision with recorded restrictions, so we check before we schedule. We pull what’s required and handle the inspect-and-sign-off, and we’ll tell you up front if your property sits somewhere with stricter rules. Call (833) 954-4985 to talk through your address.
Yes, in most cases, and on Lucas acreage the locate call plus a physical walk is how we do it. We mark septic components, well lines, and propane runs before any digging starts, and we’ll route a line around a drain field rather than through it. If something needs to move, we tell you before we touch it. Call (833) 954-4985 for a site walk.
Chain link fence in Lucas runs $3,500 to $9,000 depending on footage, height, gauge, gate count, and terrain. Simple yard runs land near the bottom, and long perimeter runs with a drive gate land at the top. Call (833) 954-4985 for an exact quote – estimates are free.
Every install is covered by our 730-Day Done Right Promise, and if it isn’t right, we make it right. That’s on top of whatever the manufacturer provides on mesh and hardware. If you’re planning a broader build-out, homeowners often pair this with ADU Site Prep & Utilities in Lucas or Door Installation in Lucas while we’re already on site.
Get a chain link fence quote in Lucas
If you’re fencing a shop yard, a run off the back of the house, or a paddock line in Lucas, call (833) 954-4985 for a free on-site estimate. A live person answers around the clock. On the call we’ll ask for the footage you have in mind, your address, and whether equipment access is a concern; then we walk the property and hand you a written line-item quote with no surprises. If the fence is part of a full Fence Installation in Lucas project, we can scope both together, and you can see more of how we run Fence Installation across our work. Built to last, backed in writing.
Written by the team at Groundwork Construction Co.












