







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Mesquite, TX: What It Costs and How Long It Takes
A Chain Link Fence in Mesquite typically runs $3,500 – $9,000 depending on length, height, gauge, and gates, and most residential yards are built in two to four days. The order goes in first, posts set on day one, mesh and gates hung at the finish. Call (833) 954-4985 for a free on-site estimate and a written line-item number you can hold us to.
How the job actually runs, start to finish
A chain link build is short, but it isn’t random. Here’s the real sequence we follow on Mesquite properties.
- Day 1, walk and layout. We confirm the property line against your survey, mark post spacing (10-foot standard, tighter on slopes), and flag any sprinkler lines, gas risers, or buried conduit. If a line is in the way, we tell you before digging, not after. This is where you lock in height and gate swing direction.
- Day 1 – 2, dig and set posts. Terminal posts, corner posts, and gate posts get deeper holes with more concrete than line posts because they carry the tension. Concrete cures overnight. This is the stage that decides how the fence holds up against a straight-line wind out of the west.
- Day 2 – 3, rails and tension bands. Top rail goes in, tension bands and brace bands go on, and we stretch the fabric. Tensioning is where cheap installs fail: stretch it tight and the mesh stays flat for years; rush it and you get sag within a season.
- Day 3, gates and hardware. Gate frames, hinges, latches, and drop rods. If it’s a double drive gate, the sag point shows up here and we set the frame to correct for it.
- Day 3 – 4, final walk with you. We walk the line, test every gate, and hand over the written warranty. Most jobs are done in a single visit and a half.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices you’ll make before we order
Chain link is not one product. These are the four decisions that change both the look and the number.
- Gauge of mesh. 11.5-gauge is the light residential standard; 9-gauge holds its shape far better against kids, dogs, and storm debris. The heavier mesh costs more per foot but survives a hail season noticeably better in Mesquite.
- Height. 4-foot reads as a boundary; 5-foot is the common residential compromise; 6-foot is the standard for dog runs and pools. Every foot up adds post length and concrete.
- Coating. Galvanized is the honest workhorse. Vinyl-coated (typically black or green) costs more but quiets the “chain link looks industrial” complaint from HOAs and neighbors.
- Gates and framing. A walk gate is straightforward. A drive gate needs a heavier frame and a proper drop rod or caster, and that’s where a cheap bid will cut corners. Tell us now if you plan to add a second gate later; retrofitting one means re-pouring a post.
If the plan is a mix of chain link and something else, say a privacy run along the back or a hard gate at the alley, we scope that as part of a full Fence Installation in Mesquite and quote it in one line-item estimate. Our broader Fence Installation service covers the other materials.
What Chain Link Fence costs in Mesquite, TX

Most Mesquite chain link jobs land between $3,500 and $9,000. A simple 100-foot 4-foot galvanized run sits near the bottom; a 200-foot 6-foot vinyl-coated run with a drive gate and a walk gate sits near the top. Here’s roughly how the components break out:
| Item | Typical range |
|---|---|
| Galvanized chain link, 4 ft, per linear foot | $18 – $28 |
| Vinyl-coated chain link, 6 ft, per linear foot | $28 – $42 |
| Walk gate, installed | $350 – $750 |
| Double drive gate, installed | $900 – $2,000 |
| Removal of existing fence | $400 – $1,200 |
The four things that push you toward the high end:
- Linear feet and height. The single biggest driver. A 200-foot line at 6-foot is roughly double a 100-foot line at 4-foot.
- Site prep. Removing an old fence, cutting through roots, or hauling off debris adds time and disposal cost.
- Grade changes. A flat lot is fast. A sloped lot means racked panels and extra posts, which run longer.
- Gates and corners. Every terminal, corner, and gate post is a heavier, deeper pour. A yard with many corners costs more than a simple rectangle.
What’s typically included in our written estimate: post holes, concrete, all posts and rails, mesh, gates, hardware, and cleanup. What’s usually not: grading changes you request mid-job, and structure relocation if a line hits a buried utility. Call (833) 954-4985 for an exact number for your yard; the estimate is free.
See the difference
Before
After
Before
After
Before
AfterWhat Mesquite homes specifically do to this job
Mesquite is essentially built out, so this is a replace-and-rebuild market, not a new-subdivision market. Most homes we fence here are 1960s – 1990s single-story brick-veneer ranches on slab, especially across 75149 and 75150, with newer 2000s subdivisions out toward 75181 in the Lone Star and Heartland area. That matters because the fences we’re pulling out are often original, and the property-line posts are set in old clay that has moved.
That black-clay soil is the real story. It swells after a wet spring and shrinks through a dry summer, and the movement racks older fences and heaves gate posts. When we set new posts, we go deeper and wider than a flat-lot standard, and we don’t fight the ground: the posts go into the clay with enough concrete that the shrink-swell cycle stops shifting them. On the older ranches, we also watch for the brick veneer and the settling slabs nearby, and we don’t let a fence run pull against a wall that’s already on the move.
Permitting is straightforward for most residential lines but varies by height, and any HOA in the east-side subdivisions may dictate color and height. We cover the Mesquite ZIPs 75185, 75181, 75150, and 75187, so Mesquite is a routine drive. If a fence run shares a path with a new structure or an accessory building, homeowners often pair this with ADU Site Prep & Utilities in Mesquite so the utility trenching and the fence line don’t get run twice.
Serving Mesquite, TX – Our Local Coverage Area
We serve Mesquite and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Chain Link Fence in Mesquite

Two to four days for a typical residential yard, and most jobs finish in a single visit plus a short return for gates. Larger runs or a sloped lot push it to the four-day end. Call (833) 954-4985 to get a date on the calendar.
Most residential chain link lines don’t require a permit, but height limits and HOA rules apply, and taller or front-yard runs can change the answer. We confirm what your specific property needs before we order. Call (833) 954-4985 and we’ll tell you for your address.
Yes, in most cases, provided we locate the lines before digging, which we do on every Mesquite job. A buried gas riser or irrigation main occasionally means we shift a post a foot or two, never a whole line. That’s a conversation on day one, not a surprise later.
Typical range is $3,500 – $9,000, with the final number set by length, height, gauge, and gates. A 100-foot basic run is at the low end; a longer coated run with two gates is at the high end. Call (833) 954-4985 for an exact quote; estimates are free.
Every chain link job is covered by our 730-Day Done Right Promise: if the workmanship isn’t right, we make it right. That covers posts, tensioning, and gate function for two full years. If a gate sags or a post shifts, call us and we come out.
Get a free estimate on your Mesquite Chain Link Fence
Call (833) 954-4985 and we’ll set a free on-site estimate for your chain link fence in Mesquite. We measure the line, check for buried utilities, and hand you a written line-item quote with no change orders. No voicemail: a live person answers, around the clock. Tell us the address and roughly how many feet you need and we’ll take it from there.
Written by the team at Groundwork Construction Co.












