







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterFence Gates in Richardson, TX
A fence gate in Richardson, TX typically costs between $275 and $1,150 installed, depending on width, material and hardware, and most single-gate jobs are finished in a single visit. A gate is the one part of a fence you touch every day, so it has to swing clean, latch firmly and hold its shape through North Texas heat, clay soil movement and the occasional spring hail storm. Groundwork Construction Co. of Richardson builds and hangs gates that do exactly that, and we back the work with our 730-Day Done Right Promise. If it’s not done right, we make it right.
We handle gates as part of our full Fence Installation work, which means your gate is built to match the run it hangs from rather than bolted onto something that was already sagging. Whether you’re replacing a rusted-out driveway gate on a 1980s lot off Belt Line Road or adding a walk gate so the side yard is finally usable, our technicians have up to 12 years of experience and we answer the phone with a live person 24/7. Call (833) 954-4985 for a free estimate.

Key Takeaways
- A standard walk gate in Richardson runs $275-$650 installed; a wider double or driveway gate runs $700-$1,150 or more.
- Most gate jobs are completed in a single visit, and we quote upfront pricing before any work starts.
- Gate failure in Richardson is usually a post or hardware problem, not the panel itself, so we inspect the hinge post first.
- Every gate we build carries the 730-Day Done Right Promise, backed in writing.
- We’re reachable by a live person 24/7 at (833) 954-4985.
When You Need Fence Gates
Richardson homeowners call us about gates for a handful of recurring reasons. If any of these sound familiar, the gate is telling you something:
- The gate drags or won’t latch. In Richardson’s expansive clay soil, a hinge post can shift a fraction of an inch after a wet spring and dry summer, and that’s enough to throw a gate off square. When the latch stops catching, the post is usually the culprit, not the gate panel.
- The gate sags at the hinge side. A gate that’s dropped and scrapes the ground means the hinges have pulled or the post has rotted at the base. This is common on older wood fences in neighborhoods like Canyon Creek and Prairie Creek, where original posts are pushing 20-plus years.
- You’re adding a pool, dog run or side-yard access. A new gate turns a sealed-off backyard into usable space. We build self-closing and self-latching gates for pool enclosures that meet Richardson’s pool barrier requirements.
- Your driveway gate is rusted, bent or hard to open. Steel and ornamental gates take a beating from North Texas sun and humidity. We replace gates on existing runs, matching the style and finish of what’s already there.
- You want a wider gate for trailers, RVs or equipment. Standard walk gates are 36 to 48 inches; if you need to move a boat or trailer into the side yard, a double gate in the 8- to 12-foot range is the answer, and it needs heavier posts to stay true.
- The gate was never finished properly. We regularly see gates hung with undersized posts and light-duty hinges that were doomed from day one. When we rebuild, we size the post and hardware to the actual gate weight.

Our Fence Gates Process
Gates fail for predictable reasons, and our job is to build past those reasons the first time. Here’s how a gate project runs with Groundwork Construction Co. of Richardson:
- On-site evaluation. We look at the existing fence line, the hinge post, soil conditions and how the gate needs to function (walk-through, vehicle access, pool barrier). We measure for the right width and swing direction, and we check whether the surrounding fence can carry a new gate or needs repair first.
- Written, upfront quote. You get a clear number before anything gets ordered or dug. No surprises, no change-order games. We also walk you through our standing offers, including $1,000 off projects over $10,000 and 0% financing for 18 months on qualifying work.
- Material and hardware selection. For wood gates we match the existing fence and use galvanized or stainless hardware that won’t rust out in two seasons. For metal, we work with trusted brands like Ameristar and Jerith for ornamental steel and aluminum, and Master Halco for chain link gates. You choose quality, not just whatever’s on the shelf.
- Post setting and gate build. The hinge post goes in first, set below the frost line in concrete and sized for the gate’s weight. The gate panel is built square with diagonal bracing where needed, then hung with hardware rated for the load. For pool gates, self-closing and self-latching hardware goes on so the gate does its safety job without you thinking about it.
- Swing test and adjustment. We open and close the gate through its full arc, adjust the latch and hinges, and confirm it clears the ground by a consistent margin. You test it yourself before we pack up.
- Walkthrough and warranty. We show you the hardware, explain how to keep the gate swinging true, and leave you covered by the 730-Day Done Right Promise. If a hinge loosens or a latch drifts in the first two years, we come back and make it right.
Fence Gates Pricing in Richardson
Here’s what gate work actually runs in the Richardson market. These are installed ranges, hardware included, and they reflect what we quote, not teaser prices:
| Gate Type | Typical Installed Range |
|---|---|
| Standard wood walk gate (36-48 in.) | $275-$650 |
| Cedar or premium wood walk gate | $400-$850 |
| Chain link walk gate | $250-$500 |
| Ornamental steel or aluminum walk gate | $450-$900 |
| Double wood driveway gate (8-12 ft.) | $700-$1,150 |
| Self-closing pool safety gate with hardware | $500-$950 |
| Gate replacement on existing posts (panel only) | $200-$450 |
| Automatic gate opener added | $1,200-$2,800 |
Several things move the number. Post condition is the biggest one: a new gate hanging on a solid post is cheaper than one that needs a new post set in concrete. Material matters too, since cedar and ornamental metal cost more than pressure-treated pine or chain link. Width and weight drive hardware costs, because a 12-foot double gate needs heavier hinges and a beefier frame than a 3-foot walk gate. Pool gates add safety hardware. And if you’re adding a gate to an existing fence that’s failing elsewhere, we may recommend repairs to the run so the gate stays true. You can see the full fence cost picture on our Fence Installation in Richardson page.
Every gate estimate from Groundwork is free, and upfront pricing means the number you see is the number you pay. Ask about $1,000 off projects over $10,000 and 0% financing for 18 months on qualifying work. Call (833) 954-4985 and a live person will get you scheduled.
What affects a gate’s cost most in Richardson
- Soil and post depth. Richardson’s clay soil swells and shrinks with the seasons, so posts need to be set deep enough and in enough concrete to stay put. Skipping that step saves money now and costs more later.
- Hinge post condition. If the existing post is solid, you may only need a new panel. If it’s rotted or leaning, budget for a new post.
- Hardware grade. Galvanized and stainless hardware costs a little more and lasts years longer in North Texas humidity. We don’t hang gates with hardware that will rust out.
- Gate function. A plain walk gate, a self-closing pool gate and an automatic driveway gate are three different builds with three different price points.
Why Groundwork Construction Co. for Your Richardson Gate
We build gates as part of a full-scope home construction business, which means your gate project is handled by a company that also installs fences, driveways and pavers, and knows how a gate ties into the larger property. A few things that set the work apart:
- 730-Day Done Right Promise. If the gate we build isn’t right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it covers the gate the same as the fence.
- A live person, 24/7. Call (833) 954-4985 and a real person answers, day or night. No voicemail, no waiting until Monday.
- Background-checked, uniformed technicians. Every tech is verified and arrives in uniform. Our technicians have up to 12 years of experience.
- Trusted brand partners. For gates and fencing we rely on names like Ameristar, Jerith and Master Halco, so the hardware and materials hold up.
- Experience across Richardson. We’ve worked on gates and fences throughout Richardson, from older neighborhoods near downtown to newer builds out toward Plano. Different lots need different approaches, and we size the gate to the property.
Fence Gates in Richardson: What to Check Before You Call
A little diagnosis before the call helps us quote faster and helps you decide what you actually need. Here’s what’s worth noting:
- Does the gate drag or swing open on its own? That points to a post or hinge issue, not the panel. In Richardson, this often shows up after a wet spring moves the clay.
- Is the hinge post solid? Push on it near the ground. Any wobble means the post needs attention before a new gate goes up.
- Is the gate square? Measure corner to corner across the gate. If the two diagonals aren’t close, the gate has racked and needs rebuilding or rehanging.
- Is the hardware rusted or loose? Hinges and latches wear out, and on older gates in Richardson they’re often the first thing to go.
- What’s the gate for? Walk-through, vehicle access, pet containment and pool safety each call for different hardware and post sizing.
If a fence is part of the project, our Fence Installation in Richardson service walks through the full build. For gates specifically, we can often quote on the spot by phone or with a quick photo.
FAQ: Fence Gates in Richardson
How much does a fence gate cost in Richardson?
A standard walk gate in Richardson runs about $275-$650 installed, while a double or driveway gate runs $700-$1,150 or more. The final number depends on material, width, post condition and hardware. Call (833) 954-4985 for an exact quote, and your estimate is free.
Can you replace just the gate without replacing the whole fence?
Yes, in most cases. If the hinge post and the surrounding fence are solid, we can build and hang a new gate on the existing posts. If the post is rotted or shifting in Richardson’s clay soil, we’ll recommend resetting it so the new gate doesn’t fail the same way. Call (833) 954-4985 to get a look at yours.
Why does my gate keep sagging or not latching?
Sagging usually means the hinge post has shifted or the hinges have loosened, not that the gate itself is bad. In North Texas, wet-dry clay cycles move posts over time, and light-duty hardware accelerates the problem. We correct the post and hardware together so the gate stays true. Call (833) 954-4985 to get it fixed right.
Do you build pool safety gates that meet Richardson requirements?
Yes. We build self-closing, self-latching gates for pool enclosures using hardware that meets the pool barrier requirements common to Richardson. We’ll check your current setup and confirm the gate does its safety job. Call (833) 954-4985 to schedule a free estimate.
How long does a gate install take?
Most walk gate replacements are done in a single visit. A new gate with a fresh hinge post set in concrete, or a double driveway gate, may take a bit longer. We give you a clear timeline with your upfront quote. Call (833) 954-4985 and we’ll get you on the schedule.
Do you offer financing or discounts on gate projects?
We do. Qualifying work over $10,000 gets $1,000 off, and we offer 0% financing for 18 months on qualifying projects. Gate projects often combine with fence or driveway work, which is where those offers stretch further. Call (833) 954-4985 for the details.
Ready to get your gate swinging right? Groundwork Construction Co. of Richardson handles gate replacement, custom builds, pool safety gates and driveway gates across Richardson, backed by our 730-Day Done Right Promise and upfront pricing. Reach us at (833) 954-4985 for a free estimate, and a live person will get you scheduled.
Written by the team at Groundwork Construction Co. of Richardson, serving Richardson.


