







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Are Custom Windows Made? What Richardson Homeowners Are Actually Buying
Custom windows are made by submitting exact opening dimensions to a manufacturer like Andersen or Marvin, where an engineer reviews the order, the frame profiles are cut and assembled to those dimensions, a glazing unit is fabricated to match, and the finished window is inspected before it ships. The frame material, glass package, and hardware are the same components used in stock windows. Only the cut measurements differ. If you’re staring at a quote with a large custom upcharge and want to know what’s behind it, call Groundwork Construction Co. of Richardson at (833) 954-4985 and we’ll walk you through it.
A 1962 Richardson ranch with original window openings almost certainly doesn’t match any stock size in a manufacturer’s catalog. That’s not a defect. It’s how those houses were built. But it does mean you’re ordering custom, and you should understand the process before someone quotes you a 40% premium for it.

Why “Custom” Sounds Expensive (And What It Really Means)
The word carries weight it hasn’t earned. When a manufacturer labels a window “custom,” they mean one thing: the dimensions were specified by the order rather than pulled from a catalog page. A custom Marvin window and a stock Marvin window share the same frame extrusions, the same low-E glass options, the same locking hardware, and the same warranty terms. The only variable is the cut.
That distinction matters on Richardson’s older blocks. In neighborhoods like Richardson Heights and the post-war pockets near Central Expressway, homes have been settling on North Texas expansive clay for 50 to 60 years. Pier-and-beam foundations move. Rough openings drift. A window opening that measured 36 inches in 1965 may not measure 36 inches today. Even a home that started with standard-sized openings can need custom units now, not because the builder did anything wrong, but because the ground underneath has had six decades to shift.
This is the part most homeowners never hear: a custom order isn’t a sign you’ve got a difficult house. It’s a sign that your house is being measured correctly.
The Actual Manufacturing Process, Step by Step
Here’s what happens after you sign off on the order, and this is the part worth understanding when you’re evaluating a bid.
- Dimension submission and engineering review. The installer submits precise field measurements to the manufacturer. An engineer checks those against structural, code, and energy performance requirements. Anything that falls outside a standard tolerance triggers a flag. Orders don’t just get routed to a cutting table.
- Frame cutting and assembly. For a Marvin fiberglass or Andersen wood-clad unit, frame and sash profiles are cut to the submitted dimensions, joined at the corners, and fitted with the specified hardware. This is where the profile type (double-hung, casement, awning) and the material grade come in. A custom-sized unit doesn’t skip a grade; it’s the same line, different length.
- Glazing unit fabrication. The insulating glass unit is built to match. Spacer bars, low-E coating, and gas fill are all chosen to spec, then the unit is sealed and assembled. In North Texas, we regularly specify higher solar heat gain coefficients for south-facing openings because summer sun on Richardson’s older brick homes drives cooling loads up. That’s a glazing decision, not a custom-vs-stock decision.
- Quality inspection and shipping. Finished units are inspected against the order, crated, and shipped. That lead time is real: most custom Andersen or Marvin orders run 4 to 8 weeks from order to delivery. It’s not a delay tactic. It’s the manufacturing calendar.

Factory-Custom vs. Field-Modified: The Difference That Voids a Warranty
Here’s a distinction that matters more than the price tag on the quote.
Factory-custom means the manufacturer built the window to your dimensions, inspected it, and shipped it under warranty. Field-modified means someone took a stock unit and cut, shimmed, or otherwise altered it on-site to force it into an opening it wasn’t built for. That second option can look like a shortcut. It isn’t one. Field modification typically voids the manufacturer’s warranty, and it’s the exact practice our brand partnerships are built to prevent. When you order through Windows & Doors with our team, the order goes to the factory at spec. No on-site cutting.
This is where the difference between a real manufacturer relationship and a parts-runner showing up in an unmarked van becomes concrete. Andersen and Marvin don’t sell to just anyone. Ordering through a partner means the custom spec goes through their engineering review, not around it.
Why Richardson’s Build Calendar Makes Lead Time a Planning Problem
Richardson’s construction season has narrow windows. Summer heat pushes crews off exterior work, and winter ice does the same. Spring and fall are when exterior trades actually run. If you’re replacing windows on a pier-and-beam ranch near the Telecom Corridor, an order placed in March lands in late April or May. An order placed in June might land in August. That four-to-eight week lead time isn’t a problem if you understand it. It becomes one if you don’t, because the project schedule and the manufacturing schedule have to line up.
We see this play out on infill lots too, where a new build goes up next to a 1963 original. The new build’s openers are standard. The original’s probably aren’t. Both look fine from the street. Only one of them is coming out of a catalog.
Custom Window Cost Ranges in Richardson
| Scope | Typical Range |
|---|---|
| Window replacement (per project, standard sizing) | $4,500-$15,000 |
| Impact window installation | $8,000-$25,000 |
| Custom-sized units (premium over stock sizing) | 15-40% above stock |
Upfront pricing is the number you see is the number you pay. No surprise line items after the order is placed. Financing is available at 0% for 18 months, and projects over $10,000 take $1,000 off. Estimates are free.
Common Local Scenarios We Walk Into
- A 1962 ranch in Richardson Heights with original aluminum sliders. Openings are non-standard, and the frames have been painted over multiple times. Custom sizing is the only path to a proper fit, but the premium is manageable when the order is priced correctly.
- A 1978 pier-and-beam home near Central Expressway. Foundation work over the years has shifted rough openings. What was standard in 1978 may not be standard now. We measure field conditions, not the original plans.
- A post-hail replacement on an infill two-story. Frame profiles and glazing have to match the existing wall assembly, and the schedule gets squeezed into the fall window after a storm. Lead time planning matters here more than anywhere.
What Sets Our Windows & Doors Work Apart
Our technicians have up to 12 years of experience. Every project is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. Technicians are background-checked and arrive in uniform. Calls are answered by a live person, 24/7, no voicemail loop. If you want to see how this fits into the broader home construction work we do across the Richardson area, that’s where to start.
We work with verified brand partners so the material choice isn’t just whichever window happens to be available that week. For exterior fencing and hardscape coordination that often runs alongside window replacement, we also work with ActiveYards, Belgard, and Unilock.
FAQs
Custom windows from Andersen or Marvin typically run 4 to 8 weeks from order to delivery. Most of that time is manufacturing and inspection, not shipping. For Richardson homeowners planning exterior work, we recommend ordering in early spring or early fall to land the install before summer heat or winter ice. Call (833) 954-4985 for a scheduling conversation.
No. Custom-sized windows use the same frame profiles, glazing specifications, and hardware as stock units from the same manufacturer. The only difference is the cut dimensions. Custom doesn’t mean experimental or unproven; it means measured to your opening. Call (833) 954-4985 if you want the spec sheet on a specific model before you commit.
Repair usually wins on a single failed glazing unit or a broken lock; full replacement makes more sense when the frame is compromised or the opening no longer seals against North Texas storm wind. A repair on a window with a blown seal runs less than a full unit replacement, but repeated repairs on the same window add up fast. Call (833) 954-4985 and we’ll give you a straight answer, not a sales pitch.
Factory-custom means the manufacturer built the unit to your exact dimensions under their warranty. Field-modified means a stock unit was cut or shimmed on-site to fit, which typically voids the manufacturer’s warranty. If a quote mentions “adjusting on-site” for a non-standard opening, ask about the warranty before you sign. Call (833) 954-4985 if you want a second read on a bid.
If you’d rather have it looked at, Groundwork Construction Co. of Richardson offers a no-pressure assessment in Richardson. Call (833) 954-4985 to schedule a free estimate and design consult. We’ll measure what’s actually there, show you what custom means in your specific case, and give you a number that doesn’t change after the order goes in.
Written by the team at Groundwork Construction Co. of Richardson, serving Richardson, TX.


