







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHVHZ Window Requirements Explained for Richardson, TX Homeowners
HVHZ stands for High-Velocity Hurricane Zone, a geographic designation in the Florida Building Code covering Miami-Dade and Broward counties, where every window, door, and skylight must pass Florida’s TAS 201, 202, and 203 impact tests and carry a valid Miami-Dade NOA or Florida Product Approval. Those rules have no legal force in Richardson, TX, and no Texas code officer will ever ask for an HVHZ approval on a Collin County permit. But the standard underneath them is the toughest residential glazing spec in the country, and knowing what it measures tells you exactly how much abuse a window can survive before a North Texas hail season finds out for you. If you want a straight read on what your own replacement actually needs, call (833) 954-4985 and a live person picks up.

The short answer, then the part that matters in Richardson
Here’s the direct version: HVHZ requirements apply to coastal South Florida, full stop. Texas runs its own wind-borne debris rules under the International Residential Code and ASCE 7, and those rules only kick in for coastal counties in the wind-borne debris region. Richardson sits well inland in a standard wind exposure category, which means there is no mandated impact glazing on any window you install here.
So why do Richardson homeowners keep hearing the term? Because “HVHZ-compliant” has become shorthand in the window trade for a product that has been destruction-tested against flying debris and cyclic wind pressure, not just rated on a brochure. When a salesperson uses that phrase in Richardson, they’re either giving you a useful quality benchmark or borrowing Florida regulatory language to sound authoritative in a market where it carries no legal weight. You should know which one you’re hearing.
What the HVHZ test protocol actually measures
Two impact tests, run separately, plus a structural loading test that most people never hear about.
- Large missile impact: a 9-pound 2×4 fired at 50 feet per second at the glass. This simulates a chunk of framing or roofing thrown by hurricane wind.
- Small missile impact: ten steel balls fired at 80 feet per second. This simulates roof gravel and small debris, and it’s the test that most resembles a hail event in how the projectiles behave.
- Cyclic wind pressure loading: the unit is then pushed and pulled through thousands of pressure cycles simulating a hurricane’s gusts, and it has to hold its seal without the glass pulling out of the frame.
That combination is why HVHZ approval is the highest residential fenestration standard in the U.S., and why engineers outside Florida use it voluntarily as a reference point. A window that has passed all three has been through conditions nobody in Richardson will see from weather. It has not, however, been through a direct 2-inch hailstone at terminal velocity, which is the actual threat on the east side of the Metroplex. Keep the two ideas separate.

What Texas actually requires, and what Richardson weather actually does
Texas regulates impact protection through the wind-borne debris region, which follows the coast. Inland cities like Richardson have no impact glazing mandate. The practical driver here is hail, not wind-borne debris, and North Texas produces some of the most documented large-hail events in the country. A window doesn’t need a Miami-Dade approval to be a smart choice for a Richardson ranch house; it needs verified impact performance data and a frame that can take a hit without the seal failing.
That distinction matters on the older platted blocks around Richardson Heights, where most of the housing stock dates to the 1950s through 1970s. Those single-story brick ranches were built with original aluminum or early vinyl units, and 40 to 60 years of thermal cycling in North Texas heat has usually done the seals in long before any storm gets a chance. When we walk a pier-and-beam ranch near Central Expressway, the honest conversation is rarely about hurricane ratings. It’s about whether the replacement unit has destruction-tested glass and published performance data, or whether it’s whatever the storm-season distributor had on hand.
The information-gain argument: HVHZ-grade specs as a quality floor
Here’s the case for using HVHZ-equivalent performance as your benchmark even though no one in Richardson will require it. The standard is public. TAS 201, 202, and 203 results and product approvals are published documents you can look up before you sign anything. That turns a vague sales claim into something checkable.
You’re choosing between two positions. One is knowing a specific product has been destruction-tested and can show you the paperwork. The other is hoping the marketing copy is accurate. In a market with documented large-hail events, that gap is worth real money, and it’s the difference between a window that performs and a window that just looks the part.
| Window scope in Richardson | Typical installed range |
|---|---|
| Standard window replacement | $4,500-$15,000 |
| Impact-rated window installation | $8,000-$25,000 |
Those are real Richardson ranges, not national averages, and the spread reflects glass package, frame material, and how many openings you’re doing. Upfront pricing means the number you see is the number you pay, and we back the work with the 730-Day Done Right Promise. On a project over $10,000, $1,000 off applies, and 0% financing for 18 months is available if spreading the cost makes the decision easier.
How Groundwork specifies windows in Richardson
We specify by verified performance data, not by availability. Andersen and Marvin both publish impact performance figures and product approvals, which means the spec on your bid can be traced to a test document rather than a claim. Our technicians have up to 12 years of experience, they’re background-checked, and they show up in uniform. When a window arrives with an approval number you can verify, nobody has to take anybody’s word for it.
That matters on Richardson’s tighter original lots, too. Setback and lot-coverage rules on the older plats mean a window or addition change sometimes needs careful planning before a single unit is ordered, and the neighbor’s new build got built because someone did the survey homework first. If your window project is part of a larger scope, the same crew handles it from foundation to finish line.
Common local scenarios
Post-hail replacement on a 1960s ranch. A spring storm takes out the north-facing units. The question isn’t HVHZ approval, it’s whether the insurance replacement matches the original opening and performs better than what came out.
Scrape-and-rebuild infill. New two-story construction on a small original lot, where window spec gets locked in during design and the performance data needs to hold up at final inspection.
Telecom Corridor re-tenanting. Renovated office space near CityLine and Palisades where glazing performance specs get reviewed by a commercial reviewer, not a homeowner. Different process, same documentation discipline.
What to ask before you sign a window contract in Richardson
Skip the hurricane language and ask for the test documentation. A straightforward version of the conversation:
- Which specific product and glass package is on this bid?
- Can you show me the impact performance data for that exact unit?
- What’s the frame material and how does it hold up to North Texas thermal cycling?
- Is the price on this quote the price I pay, or is there a change-order path?
- What’s the workmanship warranty, in writing, and how long does it run?
You can run that same checklist against any quote, including ours. If you’d rather not sort through the spec sheets alone, start with our Windows & Doors page for the full scope, or see what else we handle across the Richardson service area and on our home page. Our team answers calls live, 24/7, so you won’t land in a voicemail black hole at 9 p.m.
FAQs
No. HVHZ is a Florida Building Code designation limited to Miami-Dade and Broward counties, and it has no legal standing in Richardson or anywhere in Collin County. Texas sets its own wind-borne debris rules under the IRC and ASCE 7, and those apply to coastal counties, not to inland cities like Richardson. Call (833) 954-4985 for a free estimate on what your windows actually need.
HVHZ approval is a Florida-specific certification that requires passing TAS 201, 202, and 203 testing plus a valid Miami-Dade NOA or Florida Product Approval. A Texas impact-rated window is tested to different standards and isn’t required to hold a Florida approval, though some manufacturers carry both. What matters in Richardson is verified impact performance data on the exact product, not which state’s paperwork it carries. Call us for help reading the spec sheet, and estimates are free.
Often yes, because North Texas sees documented large-hail events and impact glazing adds a tested layer of protection that standard units don’t have. Impact window installation in Richardson runs $8,000-$25,000, against $4,500-$15,000 for standard replacement, so the choice comes down to hail exposure and how long you plan to stay. Call (833) 954-4985 and we’ll walk through it without pressure.
In most cases yes, and the assessment is free. Our team answers calls live around the clock, and we’ll review your existing units, the glass package, and the frame condition before recommending anything. If a full replacement makes sense, the 730-Day Done Right Promise covers the workmanship in writing. Call (833) 954-4985 for a no-pressure assessment.
Window specs get complicated fast, and the Florida terminology doesn’t help. If you’d rather have it looked at, Groundwork Construction Co. of Richardson offers a no-pressure assessment in Richardson, TX, free of charge. Call (833) 954-4985 and a live person will get you on the schedule.
Written by the team at Groundwork Construction Co. of Richardson, serving Richardson, TX.


