







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Paver Driveway Installation Cost in Richardson?
Paver driveway installation in Richardson typically runs $7,000 to $18,000 for a standard two-car driveway, with most homeowners landing near the middle of that range once base prep, material choice, and cleanup are included. A basic concrete paver driveway on a straightforward lot often prices closer to $7,000 – $10,000, while a large driveway with premium clay brick, intricate patterns, or significant grading work climbs toward $18,000. We give you the number upfront, so what you see is what you pay.
Key Takeaways
- Most Richardson paver driveways cost $7,000 – $18,000 installed.
- Material, square footage, and base depth are the three biggest price drivers.
- Clay brick and tumbled stone sit at the top of the range; standard concrete pavers sit lower.
- Sloped lots and old concrete removal add to the total.
- Every project is backed by our 730-Day Done Right Promise and comes with a free estimate.

Paver Driveway Installation Cost Breakdown (2026)
Here’s how the numbers break down for a typical Richardson paver driveway. These ranges cover materials, labor, base prep, and cleanup. Your exact quote depends on your driveway’s size and condition, which is why we send someone out to measure before we price anything.
| Line Item | Typical Cost Range |
|---|---|
| Paver material (per square foot, installed) | $9 – $22 |
| Base prep and excavation (per square foot) | $3 – $7 |
| Old concrete or asphalt removal | $800 – $2,500 |
| Edge restraints and polymeric joint sand | $400 – $1,200 |
| Drainage correction or grading | $500 – $3,000 |
| Full project total (two-car driveway) | $7,000 – $18,000 |
The single biggest lever on your total is square footage. A standard two-car driveway in Richardson runs roughly 500 to 700 square feet; push past 800 and you’ll see the number climb fast. Material plays the next biggest role. Standard concrete pavers sit at the low end of the per-square-foot range, while clay brick and tumbled natural stone push toward the top. Base depth matters more than most homeowners expect, especially on Richardson’s expansive clay soils, which shift with our wet-dry cycles and demand a properly compacted, deep base to keep pavers from settling unevenly.
What Affects Paver Driveway Installation Pricing in Richardson
Richardson sits on some of the most active clay soil in North Texas, and that reality shows up in every driveway we price. Here are the factors that move the number up or down.
- Driveway size and shape. Square footage drives the total, and curves, circles, and tight borders require more cutting and waste. A straight rectangular driveway in the Canyon Creek area prices lower than a curved, multi-texture design near Breckinridge Park.
- Material choice. Concrete pavers, clay brick, and tumbled stone each carry different material and labor costs. Clay brick runs highest because of both the material price and the extra care required to lay it. We work with trusted brand partners like Belgard so you get verified quality, not whatever happens to be in stock.
- Base prep and soil conditions. Richardson’s clay-heavy ground expands and contracts seasonally, so a shallow base leads to heaving and rutting within a couple of years. We build the base to handle it, and that prep is baked into the honest price we quote.
- Removing the old surface. If there’s an existing concrete or asphalt driveway, breaking it out and hauling it away adds to the job. Older homes near downtown Richardson often have cracked slabs that need full removal.
- Drainage and grading. The flat lots and heavy spring storms around Richardson mean water needs somewhere to go. Correcting slope or adding drainage adds cost but prevents washouts later.
- Access and site conditions. Tight driveways, low tree branches, or utility boxes in the way slow down the work and add labor.

How to Save on Paver Driveway Installation
You don’t have to accept the top of the range. A few practical moves keep the project affordable without cutting corners on the parts that matter.
- Skip the most expensive pavers. Standard concrete pavers that mimic brick or stone give you the look for less than clay brick, and they hold up well in Richardson’s climate.
- Keep the shape simple. Straight edges and a single pattern reduce cutting and labor. Save the intricate herringbone for a walkway or patio where the square footage is smaller.
- Bundle with a patio or walkway. If you’re already tearing out old concrete, adding a paver patio at the same time spreads the base-prep and mobilization costs across two projects. Our team can quote both in one visit.
- Get your estimate in the off-season. Late fall and winter are slower for outdoor work in Richardson, which sometimes means more scheduling flexibility and sharper pricing.
- Ask about financing and current offers. We offer 0% financing for 18 months and $1,000 off projects over $10,000. That can take a real bite out of a larger driveway project.
The best way to know what your specific driveway will cost is to get a real number. Our estimates are free and come with a design consult. Call (833) 954-4985 to schedule yours.
Why Paver Driveways Hold Their Value in Richardson
Richardson homeowners care about curb appeal, and a paver driveway delivers it in a way plain concrete doesn’t. The city’s mix of established mid-century neighborhoods and newer developments means a driveway that looks sharp can set a home apart on the block. Paver driveways also handle our climate better than poured concrete, which cracks when the clay beneath it shifts. Pavers flex with the movement and individual units can be lifted and reset if something fails, rather than requiring a full tear-out. That’s part of why the upfront cost of $7,000 – $18,000 is often the smarter long-term number.
We build every driveway with premium materials and back the workmanship with our 730-Day Done Right Promise, so if something isn’t right, we make it right. That’s the kind of guarantee that matters when you’re spending five figures on a hardscape that needs to last decades.
What’s Included in Our Paver Driveway Installation
We handle the whole job, from the first cut to the final sweep. Here’s what a Groundwork Construction Co. of Richardson paver driveway includes:
- On-site measurement and design consult
- Removal and disposal of the old surface, if needed
- Excavation and compacted, properly deep base
- Edge restraints and proper slope for drainage
- Pavers laid in your chosen pattern and color
- Polymeric joint sand and final cleanup
Our technicians have up to 12 years of experience on hardscape projects, and they’re background-checked and arrive in uniform so you know exactly who’s on your property. You get one team, one plan, from foundation to finish line. That’s how we keep the promise simple.
Do Paver Driveways Need Maintenance in Richardson?
Not much, but a little goes a long way. Richardson’s summer heat and heavy spring rains can loosen joint sand over time, so plan on a re-sanding every few years, which usually runs a few hundred dollars. A quick rinse with a hose clears most surface dirt. If weeds pop up in the joints, pull them early. Stay away from pressure-washing at high settings, which can dislodge the sand and shift pavers. Compared to the crack repair and resurfacing a concrete driveway often needs, the maintenance on a paver driveway is minimal.
Paver Driveways vs. Concrete, Asphalt, and Replacement
Homeowners often ask whether they should just go with the cheaper option up front. It depends on how long you plan to stay and how much you care about looks. Here’s a quick comparison using Richardson market prices:
- Paver driveway installation: $7,000 – $18,000
- Concrete driveway installation: $4,500 – $12,000
- Asphalt driveway paving: $3,500 – $9,000
- Driveway replacement: $5,000 – $14,000
- Driveway sealing (ongoing upkeep): $250 – $700
Concrete and asphalt cost less upfront, but Richardson’s clay soil works against both. Concrete cracks as the ground shifts, and asphalt needs regular sealing and eventually repaving. Pavers flex, can be individually replaced, and add resale value that flat concrete doesn’t. If you’re planning to stay in your home for more than a few years, the paver investment tends to pay for itself. If your driveway is beyond repair and you’re weighing options, our Richardson service area page is a good place to see what else we do.
How Long Does Installation Take?
Most Richardson paver driveways take two to four days to complete. Smaller driveways can wrap in about two days, while larger projects with substantial grading or a patterned layout stretch to four. Weather plays a role, since wet clay is no good to work on and heavy spring storms around Collin and Dallas County lines can push the schedule. We’ll give you a realistic timeline in your estimate rather than an overly optimistic one, and we show up when we say we will.
How to Choose a Paver Contractor in Richardson
The company you hire matters as much as the pavers. Look for three things: a written, itemized quote (not a one-line number scribbled on a business card), a clear workmanship guarantee, and a crew that shows up as promised. We answer the phone with a live person 24/7, so when you have a question or a concern, you get a real human, not voicemail until Monday. Every job we do carries our 730-Day Done Right Promise. If it isn’t right, we make it right. That’s the accountability other contractors leave in the fine print.
FAQs – Paver Driveway Installation Cost
How much does a paver driveway cost in Richardson?
A paver driveway in Richardson typically costs $7,000 – $18,000 for a standard two-car driveway. Simpler designs and standard concrete pavers land near $7,000 – $10,000, while clay brick, complex patterns, and major grading push toward $18,000. Call (833) 954-4985 for a free, exact quote tailored to your driveway.
Is a paver driveway worth the cost in Richardson?
For most homeowners planning to stay put, yes. Pavers cost more upfront than concrete, but they handle Richardson’s clay soil without the cracking, can be individually repaired, and add real curb appeal. The investment tends to hold up over decades rather than years. Reach out for a free estimate and we’ll walk you through the numbers.
How much does it cost to remove an old driveway first?
Removing an existing concrete or asphalt driveway usually adds $800 – $2,500 to the project, depending on size and how easily it comes up. Older cracked slabs near downtown Richardson often need full removal. Call (833) 954-4985 and we’ll fold removal into your total quote so there are no surprises.
Do you offer financing for a paver driveway?
Yes. We offer 0% financing for 18 months, so a $7,000 – $18,000 project can be spread across a year and a half without interest. We also offer $1,000 off projects over $10,000. Ask about both when you call (833) 954-4985 for your free estimate.
Can you install my paver driveway this month?
Often, yes, depending on the schedule and weather. Because spring storms can slow outdoor work in Richardson, the sooner you call, the better your odds of an early start. Call (833) 954-4985 and we’ll check availability and get you on the calendar.
What brands of pavers do you work with?
We install pavers from trusted partners including Belgard, and we don’t push whatever happens to be in stock. You choose the material; we install it right. Call (833) 954-4985 for a free design consult and material walkthrough.
Get Your Free Paver Driveway Estimate
A paver driveway is a real investment, and you deserve a straight answer on what it costs before you commit. We give you an upfront price with no hidden line items, a design consult at no charge, and a 730-Day Done Right Promise backing the workmanship on every Richardson project. Our technicians have up to 12 years of experience, calls are answered by a live person 24/7, and we show up uniformed and background-checked. Ready to see exactly what your driveway will cost? Call (833) 954-4985 for your free estimate today.
Written by the team at Groundwork Construction Co.
Pricing reflects the Richardson market as of 2026. Groundwork Construction Co. of Richardson offers free estimates – call (833) 954-4985.
What Our Customers Say
"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."
- Marco Castillo"Change orders were written down and priced before the work happened, every single time. No surprise at the end."
- Keisha Robinson"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."
- Craig Whitaker












