







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Allen, TX: What the Job Actually Involves
A paver driveway in Allen typically runs $7,000 to $18,000 and takes two to four working days once the base is set. Most of that money goes underground into excavation and a compacted aggregate base, and the pavers themselves are the last day. Call (833) 954-4985 to schedule a free on-site estimate and get a line-item written quote before anything is ordered.
How We Build a Paver Driveway, Start to Finish
Every stage matters more than the last, which is why we sequence the work the same way on every job. Here is what happens between the estimate and the final walkthrough.
- Days 1 to 2: Layout, permits, and demolition. We stake the drive, confirm the grading and drainage direction, and pull the required Allen permits. Then the old surface comes out – asphalt, cracked concrete, or a builder’s original slab – and gets hauled off. You decide the layout here: run width, any widening near the garage apron, and whether the drive curves or stays straight.
- Day 2 into 3: Excavation and the compacted base. Six to eight inches of current driveway surface and subgrade come out, then four to six inches of crushed aggregate go in and get compacted in thin lifts with a plate compactor. This is the step that decides whether the driveway stays flat and settled. You don’t see it later, but it’s where most of the cost lives.
- Day 3: Edge restraint, geotextile, and bedding sand. We install an edge restraint pinned into the base, lay a separation fabric, and screed a one-inch bedding sand layer to the exact finished grade. A poorly graded sand bed is why pavers heave.
- Day 4: Paver laying and cutting. Field pavers go down in a running bond or your chosen pattern, then border courses, herringbone accents, or a soldier course go in along the edges. Cuts at the apron, walks, and utility covers happen with a wet saw.
- Day 4 or 5: Compaction, joint sand, and cleanup. A final pass with a plate compactor seats the pavers into the bed, joint sand gets swept and vibrated in, and the site is cleaned. On top of that is the 730-Day Done Right Promise on workmanship.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Paver Options You’ll Actually Choose Between
The pallet of pavers you pick does more to set the look and the long-term bill than any other decision. Here is what’s on the table for Allen homeowners.
- Concrete pavers (the Allen standard): Interlocking block, either a 60mm or 80mm thickness. The 80mm is worth it for a driveway carrying full-size trucks and SUVs; the 60mm is fine for a light-use drive and costs less. Available in dozens of neutral and brick-red tones. Belgard is the brand most of our Allen customers lean toward for finish and color consistency.
- Clay brick pavers: A classic look that holds color longer than concrete and shrugs off North Texas sun. Hotter underfoot in summer, heavier on the budget, and the brick tones can shift on the pallet from batch to batch. Best for someone going for a traditional brick-and-frame home look.
- Permeable pavers: A growing pick where the lot drains toward the garage or the street. Gaps and a gravel-filled base let water through, but they need a slightly deeper base and careful base aggregate spec, so they cost a little more than standard pavers. Useful on a tight lot where runoff has nowhere to go.
- Pattern and border: Running bond is the budget-friendly default. Herringbone adds labor and looks great at the apron. A soldier course border adds a crisp edge and typically costs a modest bump.
- Color and texture: Tumbled, shot-blast, and standard finishes each have a different feel and a slightly different price. Pick one sample from the actual lot and see it in the sun before you commit.
What Paver Driveways Cost in Allen, TX

The honest answer for a two-car driveway in Allen is $7,000 to $18,000 installed, all-in, with the base, drainage, and cleanup in the number. Here’s where the range comes from.
- Square footage: A single-car drive lands near the low end. A wide, curved, or three-car drive pushes to the high end. Rough cost is $12 to $20 per square foot installed.
- Existing surface condition: Asphalt or a failed slab demo is a day of work and a haul-off fee. A clean subgrade saves money; buried concrete from an older job does the reverse.
- Drainage and grade work: If the drive doesn’t drain away from the house or the street, a French drain, a channel drain at the apron, or regrading adds cost. Black clay soil here needs to be graded right the first time.
- Material grade: Standard concrete pavers sit in the middle. Clay brick or premium finishes push the total. A short border or accent band adds a modest amount.
- Permits and inspection: Allen requires a permit for a new driveway and any work in the right-of-way or at the apron tie-in. We pull those and pass the inspection.
A written estimate from us lists the excavation, base depth, aggregate spec, edge restraint, bedding sand, pavers, joint sand, and cleanup line by line, so you can compare it to any other bid you get. What it doesn’t include: upgrades like permeable pavers, lighting channels, or metal edging, which we quote separately. Upfront pricing, no surprises and the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Allen Homes Do to This Job
Allen is a Collin County growth city that built out almost entirely after 1990, so the driveways we replace here are usually 1990s-to-2020s builder-grade driveways – often asphalt that has aged out, or concrete with a handful of hairline cracks that have spread on the black clay. On the small lots common in 75002’s older subdivisions, the drive often runs tight against the neighbor’s, so a little extra grade and edge detail keeps runoff off the shared line. Over in 75013, the newer custom homes often have wide three-car drives, and thin asphalt doesn’t hold up against the load. When a homeowner is doing a full front-of-house upgrade, paver work is often part of a wider Driveway & Pavers in Allen plan, and neighbors often pair it with Door Installation in Allen when the front entry is getting refreshed at the same time.
A few Allen-specific realities to plan for. The clay soil here expands and contracts with the wet-dry cycle, so the base has to be compacted in real lifts and the grading has to send water off the drive, or you get sinking and joint sand washing out inside a few seasons. Allen has architectural-review requirements in most of its subdivisions, and where the drive is visible from the street or touches the right-of-way, that review comes before the city permit. Savvy builders budget a week or two of HOA review time into the schedule instead of assuming a fast green light. In the spring, hail and storm-driven water test any new drive; we grade our work so water runs to the street, not toward your garage door. We work across Allen in 75002 and 75013, from the older starter neighborhoods off US 75 to the newer custom streets in 75013.
Serving Allen, TX – Our Local Coverage Area
We serve Allen and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Allen

A standard two-car driveway in Allen is two to four working days once we start. A larger or curved drive, or one that needs drainage work, runs closer to five. The Allen permit and any HOA architectural review can add time before day one, so call (833) 954-4985 to get a real timeline for your address – estimates are free.
Yes, in most cases – Allen requires a permit for a new driveway and any work at the apron or in the right-of-way. We pull the permits and coordinate the inspection. If your subdivision has architectural review, we help schedule that too. Call (833) 954-4985 and we’ll walk you through what your address needs – the estimate is free.
Yes, if the base is built for it. Allen’s clay expands and contracts with the wet-dry cycle, so we use a compacted aggregate base at the right depth, edge restraint, and grading that sheds water to the street. Pavers flex a little with the ground instead of cracking like concrete, and a hard hail hit is a swap of a few pavers rather than a new pour. Call (833) 954-4985 for a free on-site estimate.
Most Allen paver driveways run $7,000 to $18,000 installed, with square footage, base condition, and drainage driving the range. Standard concrete pavers land in the middle; clay brick and permeable pavers run higher. Call (833) 954-4985 for an exact line-item quote – estimates are free and there is no obligation.
Every paver driveway is covered by our 730-Day Done Right Promise on workmanship, and you get a written quote before we break ground. If something is off after we finish, we come back and make it right. Our technicians have up to 12 years of experience, and they show up in uniform and background-checked. Call (833) 954-4985 to schedule your free estimate.
Get Your Allen Paver Driveway Priced
Call (833) 954-4985 to schedule a free on-site estimate for paver driveways in Allen. A live person answers 24/7, and we’ll set a visit within the week. On the visit, we walk the drive, check the grade and the drainage, and measure the square footage. You get a written, line-item quote with the base depth and the paver spec spelled out, plus the 730-Day Done Right Promise in writing. No change orders and no surprises. If you’re planning the porch or entry too, our Cabinets & Countertops in Allen and Driveway & Pavers teams can quote alongside. Call (833) 954-4985 today.
Written by the team at Groundwork Construction Co.












