







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Vinyl Fence Installation Cost in Richardson?
Vinyl fence installation in Richardson typically runs $3,500 to $9,000 for a standard residential lot, with most homeowners landing between $4,800 and $6,500 for 150 to 180 linear feet of 6-foot privacy fence. A basic 4-foot picket run on a smaller corner lot can come in closer to $3,500, while a tall privacy fence with masonry columns and multiple gates pushes toward the top of the range. Those numbers include materials, removal of the old fence, and cleanup. Concrete work, permits, and custom gates are usually the swing factors.
We’re Groundwork Construction Co. of Richardson, and fence work is one of seven core services we run for homeowners here. Because we pair that with a written workmanship guarantee and upfront pricing, you’ll know your number before anyone digs a post hole. Call (833) 954-4985 for a free estimate and design consult.

Key Takeaways
- Most Richardson vinyl fence projects land between $3,500 and $9,000.
- Expect roughly $22 to $45 per linear foot installed, depending on height, style, and site conditions.
- Removing an old fence adds $400 to $1,200. Concrete footings or rocky soil push that higher.
- Every project we install is covered by the 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space.
- Financing is available at 0% for 18 months, plus $1,000 off projects over $10,000.
Vinyl Fence Installation Cost Breakdown (2026)
The real cost of a vinyl fence is not one number. It’s the fence panels plus the parts nobody sees: posts, rails, caps, concrete, labor, disposal, and any permitting. Here’s how the pieces break down in the Richardson market for 2026.
| Line Item | Typical Cost Range | Notes |
|---|---|---|
| 6-ft privacy fence (150 – 200 linear ft) | $4,500 – $8,500 | Most common Richardson residential project |
| 4-ft picket fence (100 – 150 linear ft) | $3,500 – $5,500 | Common for front yards and corner lots |
| Per linear foot, installed | $22 – $45 | Height, style, and site conditions drive the spread |
| Old fence removal and disposal | $400 – $1,200 | Adds more if posts are set in concrete |
| Single walk gate | $250 – $600 | Ranges from standard hinge to self-closing |
| Double drive gate | $650 – $1,500 | Upcharges for gate hardware and bracing |
| Concrete footings (per post) | $25 – $60 | Standard for Texas clay soil |
| Corner lot or HOA height variance | $300 – $900 | Covers survey work and permit fees |
| Custom lattice top or decorative caps | $400 – $1,400 | Optional upgrade |
What pushes a Richardson vinyl fence toward the top of the range? Rocky or stubborn clay soil that slows post digging, a property line that wanders, a slope that needs step panels, or a fence that has to wrap a lot of corners. What pulls it down? A short run, an existing footing line you can reuse, and standard off-the-shelf panel sizes that require little or no custom cutting. The physical layout shapes the price far more than the brand of vinyl. A 120-foot fence on flat ground in Canyon Creek costs meaningfully less than a 220-foot fence on a graded lot near Prairie Creek, even with the same panels.

What Affects Vinyl Fence Installation Pricing in Richardson
- Fence height and linear footage. Height is the biggest driver. A 4-foot picket is materially cheaper than a 6-foot privacy fence because there’s less panel material and less wind load to brace against. Cost scales roughly with the square footage of the fence face, not just the length of the line.
- Soil and site conditions. Much of Richardson sits on expansive clay soil that swells in wet months and shrinks in dry ones. Posts need deeper concrete footings (usually 24 to 36 inches) to stay plumb through seasonal movement. That adds labor and concrete but protects the fence from the leaning post problem we see all over older neighborhoods.
- Old fence removal and disposal. Pulling a 20-year-old cedar fence means cutting panels, prying out posts, and hauling everything to the transfer station. If posts are set in concrete, removal takes longer and costs more. This line item is often the difference between a $4,000 job and a $5,500 one.
- Gates and hardware. Walk gates and double drive gates need heavier posts, better hardware, and more detailing than a straight run. A self-closing or keyed-latch gate adds complexity. If you need a pool-safety-compliant gate, that’s a different build.
- HOA and city permitting. Many Richardson neighborhoods, especially in the Canyon Creek, Prairie Creek, and Twin Creek areas, have HOA rules on fence style, height, and color. Corner lots may require a permit and survey showing the property line. Those fees and documentation requirements add to the total.
- Style and customization. Standard dog-ear privacy panels keep costs low because they’re manufactured in bulk. Board-by-board, decorative lattice tops, scalloped tops, brick or stone columns, and custom routing add labor and material. Custom work isn’t a problem, it’s just priced differently.
Where Vinyl Fence Pricing Goes Wrong in Richardson
Three things quietly blow up budgets here, and none of them show up on a cheap contract.
Property line disputes. East Richardson lots were platted decades apart, and fences sometimes sit a foot off the recorded line. Before any posts go in, we walk the boundary with the plat and survey. A little fence-line survey work up front is far cheaper than a neighbor dispute in year two.
Drainage easements. Some Richardson lots back up to drainage easements and utility corridors where a fence isn’t allowed, or has to be a specific type. Know before you build.
Wind and summer sun. A 6-foot solid vinyl panel acts like a sail in a north Texas storm. Proper post depth and spacing matters more here than in milder climates. We build for that wind load, not around it. Skipping that step is how cheap fences end up leaning within two seasons.
How to Save on Vinyl Fence Installation
There’s no magic cheap fence. But there are smart ways to spend less without compromising the build.
- Bundle fence work with other projects. If you’re planning a new driveway or paver patio, running it with the fence spreads delivery and mobilization costs. The combined project may also qualify for our $1,000 off promotion on projects over $10,000. See our home page for what else we handle under one roof.
- Choose standard panel styles. Off-the-shelf 6-foot privacy panels with dog-ear tops cost less than custom-designed runs and look clean on most residential lots. Custom design is available, but standard sizes save on material and labor.
- Keep gates simple. One walk gate instead of two, and standard hardware instead of specialty latches, trims $200 to $500 without hurting the fence.
- Remove a straight run cleanly. If the old fence isn’t tangled with concrete deep enough to slow removal, disposal costs less. Where possible, mark the old post line and let the crew plan for it before quoting.
- Use financing instead of waiting. Our 0% financing for 18 months lets you build the fence you actually want without draining savings. That’s the accessible way to pay, not the cheapest way.
Call (833) 954-4985 for a free project estimate and design consult. A live person answers the phone, day or night.
Vinyl vs. Other Fence Materials in Richardson
Homeowners here often ask how vinyl compares to wood. Cedar privacy fencing in Richardson typically runs $18 to $32 per linear foot installed, which makes it cheaper on day one. Over 15 to 20 years, vinyl’s resistance to rot, termites, and our muggy spring weather offsets the higher upfront cost. Vinyl doesn’t need staining or sealing, and in a Texas summer it doesn’t dry out and warp the way untreated pine does.
Aluminum fencing in Richardson runs about $28 to $55 per linear foot installed and wins when sightlines and perimeter security are the goal. Chain link is cheaper still but rarely what anyone wants in a front yard. If you’re weighing materials, see our Richardson service area page for the full range of work we handle in this market.
What’s Included in Our Vinyl Fence Installation
Upfront pricing means the number you see is the number you pay. Here’s what sits inside that number on a standard Groundwork job:
- Layout and boundary walk with the plat and survey where needed
- Old fence removal and haul-away
- Post holes dug and set in concrete to the correct depth for Texas clay
- Panels, rails, caps, and all hardware
- Gates hung and aligned so they swing clean
- Cleanup and final walkthrough
- The full 730-Day Done Right Promise. If it’s not right, we make it right.
Our technicians have up to 12 years of experience, and every technician is background-checked and arrives in uniform. You’ll know who’s on your property, and it won’t be a stranger in an unmarked truck.
FAQs – Vinyl Fence Installation Cost
How much does a 150-foot vinyl fence cost in Richardson?
A 150-foot 6-foot privacy fence in Richardson usually costs $4,200 to $6,800 installed, including removal of an old fence of similar length. A 4-foot picket run on the same 150 feet runs $3,500 to $5,200. If you add a walk gate and need property-line survey work, plan closer to the top of either range. Call (833) 954-4985 for an exact quote. Estimates are free.
Is it cheaper to repair or replace a vinyl fence in Richardson?
Repair almost always wins when damage is limited to one or two panels or a single leaning post. A panel swap runs $150 to $400, and re-setting a post runs $200 to $500. Replacement makes more sense when more than about a third of the fence is failing or the posts have gone soft. If you’re losing posts along a whole run, a fresh install usually costs less over the next decade than repeated fixes.
Can you install a vinyl fence in Richardson the same day I call?
No. A standard fence install is a multi-day project: layout, removal, digging, setting posts in concrete, then hanging panels after the concrete cures. On a typical Richardson lot, plan on two to four days of work, plus a few days’ lead time for materials. Residential access and clay-soil curing are real constraints. If you have a timeline in mind, call us and we’ll build the schedule to match.
What does a 6-foot vinyl privacy fence cost per linear foot in Richardson?
Expect $30 to $45 per linear foot for a 6-foot vinyl privacy fence installed in Richardson, including panels, posts, concrete, and hardware. That range covers dog-ear privacy panels and standard post caps on a typical lot. Taller than 6 feet, custom lattice tops, or heavy gate loads push the per-foot number higher.
Do I need a permit or HOA approval for a vinyl fence in Richardson?
Most Richardson residential fences don’t require a city building permit, but front-yard and corner-lot fences often do, and many HOAs require written approval of style, height, and color before work starts. Corner lots and fences in drainage easements need the most care. We walk that check with you as part of the design consult so nothing surfaces mid-build. Call (833) 954-4985 and we’ll sort out your specific lot before pricing.
Why Groundwork Construction Co. of Richardson
We’ve been in business since 2014, and we run seven core service lines for Richardson homeowners: kitchens, baths, roofing, windows and doors, fencing, driveways and pavers, and additions and ADUs. That means one accountable contractor from foundation to finish line instead of four subs pointing at each other when something goes wrong.
We keep a live person on the phone 24/7, so you’re never routed to voicemail or waiting until Monday. We price it upfront, so the number on the estimate is the number you pay. And every job comes backed in writing with the 730-Day Done Right Promise. That’s the whole deal.
Ready to price your Richardson vinyl fence? Call (833) 954-4985 for a free estimate. Ask about 0% financing for 18 months and $1,000 off projects over $10,000.
Pricing reflects the Richardson market as of 2026. Groundwork Construction Co. of Richardson offers free estimates – call (833) 954-4985.
What Our Customers Say
"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."
- Marco Castillo"Change orders were written down and priced before the work happened, every single time. No surprise at the end."
- Keisha Robinson"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."
- Craig Whitaker












