







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWrought Iron Fence Cost in Richardson, TX: What You’ll Actually Pay
Wrought iron fence installation in Richardson runs about $3,500 to $9,000 for a typical residential project, which works out to roughly $35 to $75 per linear foot installed. That range is wide on purpose: in Richardson, the single biggest cost variable is whether your fence can use pre-fabricated panels or has to be custom-fabricated to match the grade and angles of your lot. Call (833) 954-4985 and a live person will walk you through an upfront estimate for your exact yard, with no surprises.
Most published cost guides assume a flat, straight run. That assumption quietly breaks down across much of Richardson. On the original 1950s and 1960s platted blocks, lot grades pitch toward the street and corner lots carry city sight-line setbacks, so almost every wrought iron install here needs at least some custom fabrication. That single fact changes the per-foot number more than paint color, post style, or gate hardware ever will.
Key Takeaways
- Installed wrought iron in the DFW market lands around $35-$75 per linear foot, with a full project typically $3,500-$9,000.
- Modular pre-fabricated panels are cheaper but only fit flat, square runs. Richardson’s older contoured lots often force partial or full custom work.
- North Texas clay and moisture demand a real finish system (primer plus powder coat or enamel), not a single coat of paint, and that shows up in the price.
- Corner lots in older Richardson plats face clear sight-triangle rules that can shorten or taper panels, adding design and fabrication cost.

Modular Panels vs. Custom Fabrication: The Cost Line That Matters Most
Two fences can look identical in a photo and cost very differently. The difference is how they’re built.
Modular wrought iron panels arrive pre-fabricated in standard lengths, usually 6 or 8 feet. They sit level, they’re fast to set, and they’re the cheaper option. On a flat, straight lot, modular panels can keep you near the low end of the per-foot range. The catch: they don’t follow a slope or a turn well. Force them onto a contoured yard and you get visible steps, gaps under the rails, and a fence that reads as an afterthought.
Custom-fabricated wrought iron is welded to match your actual grade and angles, either in a shop or in place. Panels taper down a pitch, rack along a curve, and step cleanly at grade breaks. It costs more because someone has to measure the real yard, cut and weld to fit, and account for every corner. In Richardson’s original plats, most installs need at least some custom work even when the homeowner expected standard panels.
Here’s the operator detail most guides skip: the phone estimate is where the surprise hides. A contractor who quotes off a satellite photo can’t see that your lot drops two feet from the porch to the curb. We measure on-site before we price, because a modular quote that turns into a custom build halfway through is the exact bait-and-switch homeowners here have been burned by before. Our background-checked, uniformed technicians do the measuring and the fabrication, so the crew working at the front of your home is one you can see and trust, not an unmarked van that shows up and disappears.
What Drives the Price Up or Down in Richardson
The installed number is a stack of variables. Knowing which ones apply to your yard lets you sanity-check any quote you get.
| Cost Factor | Typical $ Range |
|---|---|
| Modular wrought iron, flat run (per linear foot) | $35-$50 |
| Custom-fabricated wrought iron, contoured lot (per linear foot) | $55-$75 |
| Full residential project (installed) | $3,500-$9,000 |
| Powder-coat or enamel finish system (primer + topcoat) | Included in the ranges above; single-coat paint runs lower but fails faster |
| Custom gate with quality hardware and closer | Adds to the total; hardware grade is a common variation point between bids |
| Annual touch-up and rust maintenance | Ongoing cost not included in the installed price |
The finish system is a North Texas issue. Wrought iron here lives in a high-moisture, expansive clay environment. A single coat of paint traps moisture and starts bubbling within a season or two. A proper primer-plus-powder-coat or enamel system costs more up front and lasts far longer. Cheap bids often skip it, which is why two quotes for the same footage can differ by thousands. Built to last, backed in writing is the standard we hold to, and the finish is where that promise does its real work.
Sight lines on corner lots. Corner lots in older Richardson plats sit under clear sight-triangle requirements at intersections. That often constrains fence height and placement and forces tapered or stepped panels near the corner. It’s a design and permit cost generic guides never mention, and it’s routine here.
Post size and gate hardware. Heavier posts and quality hinges and closers add to the total but keep a gate swinging true for years. Skimping here is the most common reason a fence that looked fine at install sags within eighteen months. When you weigh costs across our home services, keep in mind that fence work is one of the more affordable exterior upgrades relative to a roof or a window package.

Why Richardson Yards Push Toward Custom Work
The city’s housing stock explains the premium better than any pricing chart. The core of Richardson is 1950s to 1970s single-story brick ranch homes, many on pier-and-beam foundations, sitting on narrow original lots. Add a growing layer of two-story infill and tear-down rebuilds on those same small lots, and you get a streetscape where grades, setbacks, and lot coverage vary block to block. A fence that fits the neighbor’s yard won’t necessarily fit yours.
That’s also why permits and inspection are everyday parts of the job in Richardson, in a way they aren’t in newer single-era suburbs. If you’re planning more than a fence, our Fence Installation team handles the full scope, from color-matched iron to cedar and composite, so one crew owns the whole job from foundation to finish line.
FAQs
A typical installed wrought iron fence in Richardson costs $3,500 to $9,000, or roughly $35 to $75 per linear foot, depending on whether the run is flat (modular) or contoured (custom). Corner lots and steep grades push toward the top of that range. Call (833) 954-4985 for an exact quote, and estimates are free.
Modular panels are cheaper up front, often $35-$50 per foot versus $55-$75 for custom fabrication. But on a sloped or angled Richardson lot, modular panels can’t follow the grade cleanly, so a “cheaper” quote often turns into a custom build anyway. We measure on-site so the number you get is the number you pay.
Fence permits and sight-line rules apply in Richardson, especially on corner lots in the older plats where clear sight triangles constrain height and placement. Requirements vary by lot, so it’s worth confirming before you build. We handle the design details and walk you through what your specific yard needs.
A properly finished wrought iron fence should last decades, but North Texas clay and moisture make the finish the deciding factor. A primer-plus-powder-coat or enamel system holds up far better than a single coat of paint, and an annual touch-up keeps rust from taking hold. That maintenance is real ongoing cost beyond the installed price.
Get an Upfront Wrought Iron Fence Estimate in Richardson
Pricing a wrought iron fence in Richardson comes down to your actual yard, not a chart. Groundwork Construction Co. of Richardson offers free estimates, live people answering the phone around the clock, and our 730-Day Done Right Promise on every job, plus $1,000 off projects over $10,000 and 0% financing for 18 months. Call (833) 954-4985 to book your measurement.
Written by the team at Groundwork Construction Co. of Richardson, serving Richardson, TX.
What Our Customers Say
"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."
- Marco Castillo"Change orders were written down and priced before the work happened, every single time. No surprise at the end."
- Keisha Robinson"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."
- Craig Whitaker












