







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Sachse, TX: What It Costs and How Long It Takes
A chain link fence in Sachse usually runs $3,500 to $9,000 installed, and most residential jobs are finished in one to two days once the permit clears. That range covers a standard 4-foot or 5-foot galvanized run with posts set in concrete, a top rail, and a walk gate or two. Call (833) 954-4985 and we’ll walk your lot, measure the run, and put an exact number in writing.
How the job actually runs, start to finish

Chain link goes up faster than almost any other fence, but the prep is where a job is won or lost. Here’s the sequence we hold to on every Sachse property.
- Day 0 – site walk and utility locate. We measure the run, confirm gate placement, and log any sprinkler lines, cable drops, or buried dog fencing in the path. You decide the height, the gate swing direction, and whether the fence walks the property line or pulls in a few inches. Call 811 before anyone digs; the locate usually returns within two business days.
- Day 1 morning – layout and line marking. We string the line, check it against the plat, and set post spacing at 8 to 10 feet. This is the last chance to shift a corner or widen a gate, so we walk it with you before the first hole is dug.
- Day 1 – digging and setting posts. Terminal, corner, and gate posts get set in concrete and need to cure before they take load. Line posts go in with driven sleeves or concrete depending on soil. On Blackland Prairie clay, we set deeper and wider than a sandy-lot job would call for, because wet-dry movement works posts loose over a couple of seasons.
- Day 2 – rails, mesh, tension, and gates. Top rail threads through, mesh gets stretched and tied off, and gates hang and swing. We tension by hand and check every gate latch before we consider it done.
- Day 2 closeout – walkthrough. You inspect the line, the gates, and the tie-offs with us. Any adjustment happens then, not a week later.
The one thing that stalls this schedule is a permit that hasn’t cleared. In Sachse, the city’s own permitting and inspection process is the gatekeeper, and we won’t start digging on a job that needs a permit until it’s in hand.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices you’ll actually make
Chain link looks like one product from the street. Up close, the spec choices move both the price and how long the fence lasts.
- Height (4 ft, 5 ft, 6 ft). 4-foot is the cheapest per foot and fine for a pet boundary. 5-foot is the sweet spot for most residential lots. 6-foot adds privacy mesh and cost, and reads as a security perimeter, which some HOAs restrict.
- Gauge and coating. Standard residential mesh is 11.5 gauge; 9 gauge is thicker and carries a premium. Galvanized is the budget choice and holds up fine in North Texas. Vinyl-coated (black or green) costs more but disappears against mature trees and won’t chalk the way bare galvanized can.
- Post schedule. Heavier posts and closer spacing cost more upfront and fight clay soil movement better. This is the single most common corner cut by low bids.
- Gates. A walk gate is standard. A double drive gate, a self-closing latch, or a gate matched to an existing driveway width each add cost. Tell us now, not after posts are set.
- Toppers and privacy slats. Barbed or razor toppers are a commercial spec and usually not appropriate on a residential lot. Privacy slats add cost and wind load, and they trap debris.
If the chain link is one piece of a bigger boundary plan, the wider scope lives on our Fence Installation in Sachse page. Homeowners often pair this with ADU Site Prep & Utilities in Sachse when a shop or detached structure is going up and the boundary needs to move with it.
What Chain Link Fence costs in Sachse, TX

Plan on $3,500 to $9,000 for a typical residential chain link fence in Sachse, installed. Where you land in that band comes down to five variables.
- Linear feet. The single biggest driver. A half-acre perimeter and a quarter-acre perimeter are different jobs entirely.
- Height and gauge. Moving to 6-foot with 9-gauge mesh pushes toward the top of the range.
- Gate count and type. Each walk gate, drive gate, or self-closing latch adds to the total.
- Terrain and clearing. A lot with roots, brush, or a slope needs clearing and extra labor before a single post goes in.
- Permit scope. A permit and inspection add cost, but skipping one on a job that needs it costs far more at resale.
A written estimate from us is line-item: footage, post count, gate count, concrete, permit, and haul-off. What it doesn’t include is stump grinding, sprinkler relocation, or a fence line that crosses a utility easement the city won’t allow. We flag those before you sign, not after. Our Fence Installation service handles the wider boundary work when chain link is only part of the plan.
See the difference
Before
After
Before
After
Before
AfterWhat Sachse lots do to a chain link job
Sachse is a built-out bedroom city on the Dallas-Collin County line, and most of our chain link work here is infill: replacing a rusted-out boundary on an established lot, or fencing a corner that got re-cut after a rebuild. The housing stock is largely 1970s through 1990s brick ranch homes on generous lots, which means long runs and often a shop or detached garage in back that needs its own enclosure. Those large lots and detached structures are exactly where city setback and impervious-cover checks come into play, so we confirm the line before we dig. Blackland Prairie clay is the other factor. It swells and shrinks with every wet-dry cycle, and a fence set shallow in that soil leans within two or three seasons. We set posts deeper here than we would on sand. If you’re fencing in Sachse on an older street with big pecan and oak canopies, expect root interference along the line and plan the post spacing around it.
Serving Sachse, TX – Our Local Coverage Area
We serve Sachse and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Chain Link Fence in Sachse

Most residential chain link fences in Sachse are installed in one to two days once the permit clears and utilities are located. The build itself is fast; the permit and 811 locate are what set the calendar. Call (833) 954-4985 and we’ll give you a realistic start date.
Often yes, and it depends on height, location, and whether the fence sits on an easement. Sachse runs its own permitting and inspection process, and we handle the submittal. Call (833) 954-4985 and we’ll tell you what your specific lot needs.
No, not on a written fixed-price estimate. If we hit an undisclosed sprinkler line or a buried cable we didn’t flag, we stop and talk to you before anything changes. Our Upfront pricing, no surprises rule holds, and the job is backed by the 730-Day Done Right Promise. Call (833) 954-4985 for a free estimate.
Yes, in most cases. We hand-dig post holes rather than trench, and we haul off the spoil. If a line has to cross a patio, a driveway, or a buried utility, we work around it or quote the cut separately. Call (833) 954-4985 to schedule a walk-through.
Most jobs land between $3,500 and $9,000 installed, depending on footage, height, gauge, gate count, and site conditions. A written line-item estimate takes the guesswork out. Call (833) 954-4985 for an exact quote – estimates are free.
Get a free chain link fence estimate in Sachse
Call (833) 954-4985 for a free on-site estimate on your chain link fence in Sachse. We’ll measure the run, check the property line against your plat, confirm gate placement, and hand you a written line-item price with the permit and timeline spelled out. A live person answers around the clock. If a shop or detached structure is part of the plan, we can quote Door Installation in Sachse on the same visit.
Written by the team at Groundwork Construction Co.












