







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Murphy, TX: What It Costs and How Long It Takes
A chain link fence in Murphy, TX typically runs $3,500 – $9,000 for a full residential perimeter, and most installs wrap up in two to four working days once we’ve pulled the permit. The number that matters most is linear footage: a standard 150-foot backyard enclosure with a walk gate usually lands in the $4,200 – $5,800 range, while a corner lot with fencing on three sides pushes past $7,500. Call (833) 954-4985 and you’ll get a live person who can talk through your lot line and give you a free on-site estimate.
Chain link is the workhorse fence, not the showpiece one. It’s galvanized steel, tensioned with top rail and vertical posts, and it’s the most cost-effective way to contain a dog, fence a pool, or mark a side yard on a Murphy lot. Most of Murphy’s residential lots are already full; there’s no greenfield subdivision work here. If you’re fencing, you’re fencing around something that already exists.
How We Build a Chain Link Fence in Murphy, Mapped Out

We don’t hand you a clipboard and disappear. Here’s the actual sequence, day by day, with the decisions you’ll make along the way.
Day 1: Line check and layout
We start by walking the property with you and locating the actual property pins. In a city that’s essentially built out, existing fences are frequently off the true line by a few inches, and a fence built on the wrong side of the line becomes a neighbor problem. If pins are missing, a surveyor has to be called before we dig. You’ll walk the proposed route with us and confirm gate placement here, since moving a gate after posts are set costs you time and money. On a typical Murphy lot this walk takes about an hour.
Day 1 – 2: Utility locate and post holes
This is the stage that separates a professional install from a weekend one. We call in the utility locates; every hole gets dug by hand once we know where the irrigation, gas, and electrical runs are. If a line is marked where a post needs to go, we shift the post, shorten a panel, or angle around the obstacle. Post holes are dug to depth, not eyeballed; line runs get the same treatment. You’ll have a firm decision point here: any gate position changes must happen before the first bag of concrete.
Day 2 – 3: Setting posts and rails
Posts get set in concrete and allowed to cure long enough to hold. Then the top rail goes in, and the rail has to be level across the entire run. On a lot with slope, whether your yard drops toward your neighbor over 30 feet, we step the panels down the grade or slope the rail; you should see the plan before we build it. Post spacing, terminal posts, corner and end posts all get set with the right bracing so the fence pulls tight without sagging. Most Murphy backyards take us well under a day of rail work.
Day 3 – 4: Mesh, tension, and gates
The chain link mesh goes up and gets stretched and tensioned across the whole run. Gate frames go in next, then hardware: hinges, latches, and a tension gate where needed. The chain is tensioned to hold its shape; you’ll hear us test it. The installer checks the gate swing and adjusts for a level opening before calling it done. If you want a self-closing hinge or a child-safety latch, that’s a decision to make before hardware is installed, not after.
Day 4: Walkthrough and cleanup
We finish with a full walkthrough: every panel tested, every gate swung, and the site taken back to its original state. We haul the concrete bags and packing away so your yard looks the way it should, minus the new fence. That’s also when we price your warranty: your install is covered by our 730-Day Done Right Promise, so if a post settles or a gate hangs, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Chain Link Options You’ll Actually Choose Between
Most homeowners land on one of two sizes: 4-foot for side yards and garden borders, 6-foot for dog containment and general security. Here’s what else moves the needle.
- Galvanized steel vs. vinyl-coated chain link. Galvanized is the standard, costs less, and holds up well in Murphy’s heat. Vinyl-coated (usually black or green) costs roughly 15 – 25% more but looks cleaner against a brick veneer house and won’t rust at scratch points the way bare galvanized can.
- Gauge of the mesh. Thicker wire (lower gauge number) resists denting and dog-chewing better. The mesh grade you choose is one of the least visible decisions that has the most to do with how the fence looks in year ten.
- Post schedule and bracing. A chain link fence is only as strong as its terminal posts. Corners and gate posts need heavyset posts and bracing. This is where cheap installs hide their shortcuts.
- Top rail vs. top tension wire. A top rail is the conventional Murphy install, and it’s what makes the fence stay straight in the long run. Top tension wire is a lighter option; usually worth the trade-off only in tight budget situations.
- Gate type. A single walk gate (3 to 4 feet) is standard. Double gates for driveways and side entries get heavier frames and hinges and add to the number.
- Prerolled vs. custom fabric. Standard heights and runs use prerolled chain; odd heights or curved layouts may need custom-sized runs.
If you want the whole-yard look to be cohesive with hardscaping and a new back gate, this is where we tell you how the project scope stacks up. Homeowners often pair this with Door Installation in Murphy when they’re refreshing an adjacent entrance.
What a Chain Link Fence Costs in Murphy, TX

Expect a full residential chain link install in Murphy to land between $3,500 and $9,000 depending on linear footage, gate count, and prep. A typical backyard run of about 150 feet with one walk gate is usually in the $4,200 – $5,800 range. Ground runs roughly $22 – $32 per linear foot installed for standard galvanized, before gates and site prep, and gates usually add $250 – $900 each.
The variables that push a job to the high end:
- Linear footage and lot shape. A perimeter that wraps all four sides of a large lot is the single biggest cost driver. Corner lots often double the run of a standard interior lot.
- Existing fence removal. If the old chain link, wood, or wire fence has to come out and be hauled, that adds to the invoice; usually $300 – $800 in this market.
- Site and grade conditions. A yard sloping toward a drainage easement means stepped panels and more post holes. That kind of prep work adds labor and time.
- Gate count and gate type. Walk gates are light work compared to a double drive gate with a heavy frame and custom bracing.
- Permit scope. Standard residential perimeter fences in Murphy typically pull one residential permit. Higher fences, fences around a pool, or fences on a corner lot may bring a zoning check.
A written estimate should spell out linear footage, gate count, post weight, gauge, and what site prep is included. What’s not always in the number is stump removal and hardscape repair where the fence line crosses through an existing patio or walkway. Ask for the line-item breakdown. Upfront pricing means the number you see is the number you pay, and our 0% financing for 18 months is available if you’re timing this around a larger project. For the wider project scope, see our Fence Installation in Murphy page.
See the difference
Before
After
Before
After
Before
AfterWhat Murphy Homes Specifically Do to This Job
Murphy is nearly built out. Nearly every lot is already occupied, and the housing stock is overwhelmingly 1990s – 2000s suburban single-family homes with brick veneer, engineered gable roofs, and slab-on-grade foundations. There’s no greenfield subdivision work here, which means most fence jobs we run in Murphy are re-construction: replacing a failing builder-grade fence, extending a line as part of an addition, or reworking a boundary after a landscape change. Infill work like this lives and dies on knowing what’s already underground.
The other local reality is soil. Murphy sits on North Texas black-clay soil, which shrinks and swells with the wet-dry cycles we get here every summer. That soil movement is why fence posts heave and gate frames rack out of plumb in this part of Collin County, and why any post in a clay-heavy backyard should be set deeper and braced against lateral movement. It’s also why we don’t quote a fence by eyeballing the yard from the driveway. If you’re tying the new fence into a larger re-configuration of the side yard or outbuilding, homeowners often pair this with ADU Site Prep & Utilities in Murphy, since both jobs start with the same utility locate.
Serving Murphy, TX – Our Local Coverage Area
We serve Murphy and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chain Link Fence in Murphy

Most residential chain link installs in Murphy are completed in two to four working days, with the biggest variable being existing fence removal and how many gates you need. Post concrete needs a cure window before the tensioning stage, which is why a typical job spans more than a single day. If you’re on a corner lot with a long perimeter, plan for the high end of that window. Call (833) 954-4985 and we’ll give you a realistic timeline for your specific property.
Yes, in nearly every case – residential fencing in Murphy is a permitted improvement, and fence placement against a property line and maximum height get checked. The permit itself is part of our written estimate, and homeowners on an HOA-governed lot in Murphy should also confirm their architectural review is complete before the first post is dug, because some subdivisions restrict fence height, material, or color. We can walk through what your specific lot will require. Call (833) 954-4985 to talk through the permit side before you commit to a number.
In most cases, yes – a properly located chain link fence handle-dug can go in around existing planting beds and irrigation lines with minimal disturbance, and it doesn’t touch plumbing or the house structure at all. The honest caveat is that any buried irrigation, gas, or electrical line on the fence path gets located before we dig, and if a line sits exactly on the line, we shift the panel. Oversized stumps or mature trees on the property line may mean a post setback. For a lot with heavy existing landscaping, call (833) 954-4985 and we’ll assess it on site.
A full residential chain link fence in Murphy runs $3,500 – $9,000, with a typical 150-foot backyard run with one walk gate in the $4,200 – $5,800 range. The price moves on linear footage, existing fence removal, gate count, soil and grade conditions, and any permit requirements. Your written estimate should show every line item, and free estimates are exactly what we do. Call (833) 954-4985 to lock in a number.
Your chain link fence installation is covered by Groundwork Construction Co.’s 730-Day Done Right Promise – one of the longest workmanship guarantees in the residential construction space. That means if a post settles, a gate racks, or a tension issue shows up within the coverage window, we come back and make it right at no charge to you. Material warranties from the fence manufacturer apply on top of that. Call (833) 954-4985 to schedule your free on-site estimate.
Get Your Free Chain Link Fence Estimate in Murphy
If you’ve priced a chain link fence in Murphy and you’re done guessing, call (833) 954-4985. A live person answers, 24/7, and books you a free on-site estimate where we walk the line, check the pins and utilities, and hand you a written line-item quote. No voicemail, no vague ranges. Whether it’s a backyard dog run or a full perimeter on a corner lot, we cover Murphy and the surrounding area from 75094, and our technicians bring up to 12 years of experience to every install. Insured and bonded. Upfront pricing. $1,000 off projects over $10,000. See our full Fence Installation service for the broader scope, and check our Murphy service area page for coverage details.
Written by the team at Groundwork Construction Co.












