







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Asphalt Driveways & Resurfacing in Fairview, TX: What It Takes
Asphalt Driveways & Resurfacing in Fairview usually runs $3,500 – $9,000 for full paving, with resurfacing and sealing work landing between $250 and $700 depending on length and prep. On the acreage lots out here, most jobs take one to three days on site, plus a short curing window before you park on it. Call (833) 954-4985 and we’ll walk your drive and quote it in person.
How we run an asphalt driveway job from first cut to final pass

Asphalt isn’t complicated, but the order of operations decides whether you’re back out there in three years or ten. Here’s the actual sequence on a Fairview job.
Stage 1: Measure, grade, and quote (day 1, about an hour)
We walk the full drive with you, measure square footage, and check where water currently runs. On long private drives, drainage is the whole ballgame. You decide at this stage whether you’re going full-depth new asphalt or holding a sound base and resurfacing over it.
Stage 2: Demo and base prep (day 1 into day 2)
We strip failing asphalt, then cut and re-compact the base. A proper base means 4 to 6 inches of compacted crushed stone for a residential drive, more where clay is soft. This is the slow part, and it’s the part cheap bids skip.
Stage 3: Grading and edge work (day 2)
We set the crown so water sheds to the sides instead of pooling at the garage door, then cut clean edges. You’ll want to decide now whether you’re adding a turnaround pad or widening an apron, because changing it after the base is compacted means paying twice.
Stage 4: Paving (day 2, or day 3 on a big drive)
Hot-mix asphalt goes down at 2 to 3 inches compacted for residential work, rolled while it’s still hot. On a quarter-mile drive behind a Fairview shop, that’s a longer day and a second load of mix.
Stage 5: Cure and walk-through (day 3, then 48 – 72 hours)
We do a final walkthrough the same day. Keep vehicles off it for 48 to 72 hours and heavy trucks off for longer. We’ll leave you knowing exactly when to park, when to water it if it’s a hot week, and what to watch for in the first month.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices that decide how your drive holds up
Most of the money questions on an asphalt driveway come down to four decisions. Here’s the honest trade-off on each.
- New asphalt over a compacted base vs. resurfacing. Resurfacing costs a fraction of new paving and works when the base is still sound, but it doesn’t fix a broken base. If you’ve got alligator cracking, you’re paving, not resurfacing.
- Residential mix vs. a heavier binder grade. Standard residential mix handles cars and pickups fine. If you’re running a trailer or a heavy truck over that drive, a heavier grade costs more up front and pays you back in fewer crack repairs.
- 2 inches vs. 3 inches compacted. Two inches is the practical minimum for a residential drive. Three inches costs more per square foot and holds up noticeably better on soft clay.
- Seal coat timing. Fresh asphalt needs to cure before sealing, typically six to twelve months. Sealing sooner traps oils and causes problems, so we tell you the right window rather than upselling it on day three.
If the drive is part of a bigger project, like widening an approach or grading around a new shop, it’s usually cleaner to scope that with the rest of the site work. Homeowners building out back often pair this with ADU Site Prep & Utilities in Fairview, and it’s worth planning both together so the heavy equipment only digs once.
What Asphalt Driveways & Resurfacing costs in Fairview, TX

Here’s the range we quote most in Fairview, with the line items that make up the number.
| Work | Typical range |
|---|---|
| Asphalt driveway paving (new) | $3,500 – $9,000 |
| Full driveway replacement | $5,000 – $14,000 |
| Sealing / resurfacing | $250 – $700 |
Five things push a Fairview job toward the top of those ranges:
- Length. A 300-foot private drive costs a lot more than a 50-foot apron. Square footage is the biggest driver, full stop.
- Existing condition. A base that needs full removal and rebuild adds real cost. A sound base you’re just capping saves it.
- Drainage and grading. Long drives on sloped clay need culverts or swales. That’s equipment and material, not labor fluff.
- Access. If a truck can’t easily reach the work, we’re moving material twice.
- Permit scope. Anything crossing a public right-of-way or changing drainage off your property can trigger a town review.
Your written estimate lists square footage, base depth, asphalt thickness, and edge and drainage work. It doesn’t include landscaping repair beyond the work zone or hauling away old concrete unless we’ve priced it. Call (833) 954-4985 and we’ll put the numbers in writing.
See the difference
Before
After
Before
After
Before
AfterWhat Fairview homes and lots do to an asphalt job
Fairview is a low-density Collin County town where properties are mostly large-lot single-family homes, many custom-built on an acre or more, with older ranches and acreage estates mixed in. That lot size changes the job. A drive here is often 200 to 400 feet, which means more square footage, longer equipment runs, and a real need to think about drainage from the house to the road. Detached garages and shops are common, so we’re often paving a second approach or connecting two structures. The clay soils here swell and shrink through the wet-dry cycle, so a base that’s under-compacted will show cracks within a couple of seasons. Fairview also runs plan review and inspections through the town itself rather than handing it all to the county, so anything touching a right-of-way or drainage needs to clear their schedule before we pour. Spring hail and summer heat aren’t kind to fresh asphalt, and we’ll time the seal coat around those cycles rather than the calendar.
Serving Fairview, TX – Our Local Coverage Area
We serve Fairview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Asphalt Driveways & Resurfacing in Fairview

Most residential drives are paved in one to three days on site, and you keep vehicles off it for 48 to 72 hours after. Long acreage drives with base rebuilds can stretch to three or four days. Call (833) 954-4985 and we’ll give you a realistic window for your property.
If the drive stays entirely on your property and doesn’t change drainage off it, most residential paving doesn’t need a permit. Anything crossing a public right-of-way or redirecting runoff does, and Fairview reviews those through its own process. We’ll tell you at the estimate which side you’re on.
Only if the base is sound. Resurfacing over cracked or sunken asphalt just transfers the failure to the new layer. We probe the base during the estimate and tell you straight whether a cap will hold.
New paving typically runs $3,500 – $9,000, replacement $5,000 – $14,000, and sealing $250 – $700. The number moves with square footage, base condition, and drainage. Call (833) 954-4985 for a written estimate that holds.
Every job is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s a written guarantee, not a handshake. Ask us to walk you through it at the estimate.
Get your Fairview driveway priced right
Call (833) 954-4985 to schedule a free on-site estimate for Asphalt Driveways & Resurfacing in Fairview. We’ll measure the drive, check the base, and hand you a written quote with square footage and thickness spelled out. A live person answers, every time. If you’re thinking about the larger project around it, start with our Driveway & Pavers in Fairview page or the broader Driveway & Pavers scope, and a lot of owners here pair the drive rebuild with a Chain Link Fence in Fairview along the same property line.
Written by the team at Groundwork Construction Co.












