







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Fairview, TX: What You’re Actually Getting
A paver driveway in Fairview runs $7,000 to $18,000 for most residential jobs, and a typical installation takes three to five working days from demolition to final compaction. The number and the timeline both come down to one thing: how long and how wide your private drive is, and what’s under it. Call (833) 954-4985 and we’ll walk your lot before we quote a number. Paver Driveways are a long-horizon purchase here, and the soil underneath decides whether the surface lasts twenty years or starts shifting in three.
How We Build a Paver Driveway, Stage by Stage

On Fairview’s acreage lots this is rarely a small job. Drives are longer, grades are steeper, and drainage has to be planned rather than assumed. Here’s the real sequence.
Stage 1: Layout, drainage and grade (day 1)
We start by staking the drive and checking falls away from the house, the shop, and any detached garage. On blackland-prairie clay, where the soil swells and shrinks with the wet-dry cycle, standing water at the edge of a pour is the beginning of every failure we get called back to. You decide the width here, usually 12 to 16 feet for a single lane, wider if you’re turning a trailer around.
Stage 2: Demo and excavation (day 1 – 2)
Existing concrete, asphalt or gravel comes out, then we excavate to the depth the base demands, typically 6 to 9 inches below finished grade. On a 200-foot Fairview drive that’s a lot of dirt moving, and it’s why long-drive quotes climb faster than people expect.
Stage 3: Base and compaction (day 2 – 3)
Crushed stone goes in lifts of 2 to 3 inches and gets compacted between each one. This is the stage most budget pavers skip, and it’s the reason cheap drives rut. You’ll see us on the plate compactor longer than you’d think for a job this size.
Stage 4: Setting bed and pavers (day 3 – 4)
A 1-inch bed of concrete sand goes down, then the pavers are laid to your chosen pattern. Edging restraint gets installed on both sides. This is the day you can actually see the driveway.
Stage 5: Cutting, joint sand and cleanup (day 4 – 5)
We cut the borders, sweep polymeric joint sand into the gaps, compact the field a final time, and haul out the spoil. You’ll drive on it the same day. If the drive ties into a full Driveway & Pavers in Fairview project with a widened apron or a matching walk, we sequence it here so it reads as one job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
- Concrete pavers vs. clay brick: Concrete pavers are the workhorse for long Fairview drives – lower cost per square foot and consistent sizing. Clay brick looks richer but costs more and cracks more readily under heavy truck loads.
- Thickness: 60mm is fine for a standard car drive. Step up to 80mm if you’re parking an RV, a boat, or a dually on it. On acreage lots that’s common, and the upcharge is small next to replacing a rutted drive.
- Pattern: Herringbone locks pavers together and resists shifting best on sloped drives. Running bond and basketweave cost the same to lay but need more restraint on grade.
- Color and finish: Standard grey and tan run at the low end. Tumbled or premium blends with a Belgard-style palette add cost but give an older custom home a settled look.
- Edge restraint: Plastic edge is standard. Concrete curb is the better call on long drives with a grade change, and it’s the piece that keeps the field from spreading.
What Paver Driveways Cost in Fairview, TX

Most Fairview paver driveways land between $7,000 and $18,000. Five things push a job toward one end or the other:
- Length and width: A 40-foot suburban apron and a 200-foot private drive are different projects. Square footage is the biggest single variable.
- What’s under it: Removing old concrete or failing asphalt adds demo and hauling.
- Base depth: Clay soil that holds water can force a deeper, more heavily compacted base and better drainage.
- Paver grade: 60mm standard stock vs. 80mm premium or clay brick.
- Grade and drainage: A drive that needs a swale, a culvert, or a retaining curb costs more, and on sloped acreage it’s often unavoidable.
Your written line-item estimate breaks out excavation, base stone, pavers, edging, joint sand, and hauling, so you can see exactly where the money went. It won’t include landscaping repair beyond the work zone or a full drainage system, which we quote separately if your lot needs it.
See the difference
Before
After
Before
After
Before
AfterWhat Fairview Homes Specifically Do to This Job
Fairview is a small, affluent Collin County town of large-lot custom homes and acreage estates, and that shapes the work. Long private drives and detached shops and garages are the norm, not the exception, which means heavier loads and more square footage than a typical suburban apron. Permitting runs through the town’s own review and inspection process rather than a fast tract schedule, so plan review eats real time and we build the schedule around it. Many of the homes are older custom builds or ranch properties where the existing drive has already failed at the apron because water ran toward it for years. On blackland-prairie clay that failure is predictable, and fixing the grade is part of the job, not an add-on. If you’re pairing the drive with other exterior work, homeowners often pair this with Door Installation in Fairview or an interior refresh that calls for Cabinets & Countertops in Fairview, and we coordinate the pieces so nobody’s digging up the other’s work. For the wider scope of everything we do here, see our Driveway & Pavers service and the Fairview area page.
Serving Fairview, TX – Our Local Coverage Area
We serve Fairview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Fairview

Most residential paver driveways in Fairview take three to five working days, with longer drives or heavy excavation stretching to a week. Town plan review and inspection also add time before we pour; call (833) 954-4985 and we’ll give you a realistic window for your lot.
Often yes, because Fairview reviews and inspects projects through the town’s own process rather than deferring to the county. We pull the permits and pass the inspections as part of the job. Call (833) 954-4985 for a free estimate that spells out the permit scope.
Sometimes, but only if the existing base is sound and the grade works. On Fairview’s clay, a failed base means new pavers over it fail too. We’d rather tell you upfront than cover a problem.
Most jobs run $7,000 to $18,000 depending on length, base depth, and paver grade. Your written line-item estimate shows every component. Call (833) 954-4985 for an exact quote – the estimate is free.
Every paver driveway we build is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. Our technicians have up to 12 years of experience, and we stand behind the work in writing.
Get Your Free Paver Driveway Estimate
Call (833) 954-4985 to schedule a free on-site estimate for Paver Driveways in Fairview. We’ll walk the lot, check the grade and drainage, measure the run, and hand you a written line-item quote with upfront pricing – the number you see is the number you pay. Calls are answered by a live person, 24/7. No voicemail, no waiting.
Written by the team at Groundwork Construction Co.












