







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Sunnyvale, TX: What It Costs and How Long It Takes
Chain link fence installation in Sunnyvale, TX typically runs $3,500 to $9,000 for a standard residential lot, and most jobs are finished in two to four working days once materials are on site. The variable that moves the number most here is access: long private drives and gravel frontage on acreage properties mean the crew and delivery trucks sometimes can’t reach the fenceline the way they would in a tight suburban lot. Call (833) 954-4985 for a free on-site estimate, and we’ll walk the property line with you before anyone quotes a number.
How a Chain Link Fence Goes In, Start to Finish

No two Sunnyvale properties set up the same way, so the first visit is about finding out what we’re actually working with. Here’s the sequence we follow on a typical job.
Stage 1: The site walk and layout (day 1, about an hour)
We meet you on the property, confirm where the fence should run, and mark the corners. On larger Sunnyvale lots this is where we figure out where the truck can park, where the concrete will stage, and whether the ground is clay that’s going to fight the auger. You’ll decide fence height, gate placement, and whether the run ties into an existing fence or structure.
Stage 2: Utility locate and layout call (day 1 to 2)
Before a single post goes in the ground, a utility locate has to clear the line. Most lines are found and flagged within two business days. If you’re on a well or septic system in the rural parts of Sunnyvale, we’ll want the diagrams for those too, because a post hole through a septic line is a bad afternoon for everyone. This is a step you don’t skip.
Stage 3: Demo and post setting (day 2 to 3)
Old wire comes down and gets hauled off. Then holes get augered and set in concrete. Terminal posts, gate posts and corner posts get deeper footings than line posts, and on Blackland Prairie clay we set them with a wider bell. Posts cure for a short window before the rest of the work continues, so this is usually the last big step of one day and the framing comes the next.
Stage 4: Framing, fabric and gates (day 3 to 4)
Top rail, tension wire and the chain link fabric itself go up. Gates get hung and adjusted so they swing clean and latch the way they should. If you ordered a gate with a closer or a lock, that gets fit here. You’ll walk it with us before we call it done.
Stage 5: Final walkthrough (end of day 4)
We check post alignment, tension, and gate swing with you before we pack up. Anything that needs tightening gets tightened. The whole job sits under our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Chain link is a simple system, but the choices you make change both the price and how long the fence holds up. Here’s what matters.
- Gauge of the fabric. 11.5-gauge is the standard residential weight; 9-gauge is heavier and better if you’ve got dogs pushing on it. The heavier fabric costs more per foot but lasts noticeably longer.
- Coating. Galvanized holds up fine in North Texas; vinyl-coated in black or green costs more but hides the wire better against a treeline and holds up in hail. On larger rural Sunnyvale lots, the black vinyl-coated looks a lot better against the open field.
- Height. 4-foot runs are common for boundary lines, 5 and 6-foot for security or dog containment. Taller fence means more material, more posts and more concrete, so the per-foot cost climbs.
- Post and rail gauge. Standard posts work for most lots; a heavier post helps on long unsupported runs and in clay that moves. Master Halco makes fence systems across these grades, and Ameristar covers the heavier end if you want a beefier frame.
- Gates. A walk gate and a drive gate are the usual pair. Double drive gates cost more and need solid footings, which is money well spent if you’ll be swinging them a lot. Chain link isn’t the only gate option if you want to match a different look, and we fit gates as a standalone job too.
- Tension and top rail. A tension wire along the bottom keeps the fabric taut; a full top rail keeps it from sagging over the years. Rail is the option most people upgrade to.
What Chain Link Fence Costs in Sunnyvale, TX

For a typical residential chain link fence in Sunnyvale, budget $3,500 to $9,000 depending on length, height, coating and gates. That’s the range you’ll see on almost every quote, and here’s what moves a job toward the low or high end.
- Linear feet. A short run around a modest lot lands near the bottom; half an acre or more with a drive gate pushes toward the top.
- Height and gauge. Moving from 4-foot galvanized to 6-foot vinyl-coated with heavier fabric can add meaningfully to the total.
- Gates. A single walk gate is a small add; a wide double drive gate with heavier posts is a bigger line item.
- Terrain and access. Long gravel drives and slope changes slow the crew and sometimes mean extra staging. This is the big one on acreage properties outside the subdivisions.
- Demo of an existing fence. Removing and hauling off old wire and posts adds cost. If we’re reusing existing posts (rare, but it happens), that saves money.
Every written estimate breaks out the fence footage, gates, concrete and demo as separate lines. Upfront pricing, no surprises: the number you see is the number you pay. Our written estimates don’t usually include a utility locate hit on a private septic line (that’s a separate trade) or any landscaping repair after the work.
See the difference
Before
After
Before
After
Before
AfterWhat Sunnyvale Homes Do to a Chain Link Fence Job
Sunnyvale isn’t the dense infill you’d find a few miles west. It’s a semi-rural town where the trade area runs from large-lot ranch and custom homes to active new development, with a good stretch of acreage properties along the eastern edge of Dallas County. That changes how a chain link job gets planned. On the small-lot subdivisions near Long Creek and Tripp roads, a fence goes up fast and clean; on the multi-acre parcels, staging and access are the whole exercise. Crews routinely work on long private drives and unpaved or gravel frontage where a delivery truck and a concrete truck simply can’t reach the lot in one go, and we plan the concrete pour and the material drop around that before anyone digs. The Blackland Prairie clay out here swells and shrinks hard through North Texas’ wet and dry cycles, which is why footings get set deeper and wider than they would on stable ground. Permits and layout are handled before anyone touches the ground, and HOA rules (where they exist) get checked up front so the fence height and style clear the architectural review.
Serving Sunnyvale, TX – Our Local Coverage Area
We serve Sunnyvale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Sunnyvale

Most Sunnyvale chain link fences go in over two to four working days once posts are set and materials are on site. Add a couple of days for the utility locate and materials delivery, and longer jobs on acreage can stretch further if the crew has to stage equipment across a long drive. Call (833) 954-4985 to talk through your timeline.
In most cases, yes: fence permits are required for anything over a few feet tall, and the rules can change by property and by HOA. We pull the permit and confirm the height and setback limits before digging. Call (833) 954-4985 and we’ll sort out the permit side for your specific lot.
You can, but it’s risky on larger Sunnyvale lots. A missing survey is how fences end up a foot onto the neighbor’s acreage, and moving fence later costs more than a survey does now. We’ll walk the property line and flag it before digging, and we recommend a current survey on any acreage job.
Residential chain link in Sunnyvale runs $3,500 to $9,000 depending on length, height, coating and gates. Heavier gauge fabric, vinyl coating and double drive gates push toward the high end. Call (833) 954-4985 for an exact quote – estimates are free.
Our installation is backed by the 730-Day Done Right Promise – if it’s not done right, we make it right. That covers our workmanship, including post seating, tension and gate function. Call (833) 954-4985 with any warranty question before you book.
Get a Free Chain Link Fence Estimate in Sunnyvale
If you’re planning a chain link fence in Sunnyvale, the next step is a free on-site estimate. We walk the property line, confirm the layout and access, and put a written number on it. Call (833) 954-4985 and our team will set a time. If you’re pairing the fence with broader site work, it often fits alongside a ADU Site Prep & Utilities in Sunnyvale project or a new Door Installation in Sunnyvale for a gate-side entry. For the bigger job it’s part of, see Fence Installation in Sunnyvale, or browse our Fence Installation service and the full Sunnyvale service area.
Written by the team at Groundwork Construction Co..












