







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Balch Springs, TX: What It Costs and How Fast It Goes Up
A chain link fence in Balch Springs, TX typically runs $3,500 – $9,000 for a standard residential yard, and most jobs are finished in one to three days once we have final measurements and the layout cleared. You’re pricing galvanized or vinyl-coated steel, posts set in concrete, and a gate that actually swings true for the long haul on Blackland Prairie clay. Call (833) 954-4985 for a free on-site estimate, and we’ll walk the property line with you before anyone quotes a number.
What the Day-by-Day Sequence Actually Looks Like

Most homeowners assume a fence is a one-visit job. It can be, but the parts that determine whether it’s still plumb in five years happen before a single post goes in the ground. Here’s the real order of work we follow on a Chain Link Fence in Balch Springs.
Stage 1: Layout and utility locate (day 1, roughly two hours)
We walk the property line with you and mark the corners and gate position. Then we call 811 for the utility locate, which in this part of Dallas County usually returns within a few business days. This is the decision moment for you: exact fence height, gate width, and whether the line runs at the property line or a foot inside it. On Balch Springs lots that back up to creek bottomland, that last call matters more than people expect.
Stage 2: Demo and clearing (half a day to a full day)
Old fence panels come down and go to the curb for haul-off. We clear brush and roots along the line and grade the soil so the bottom rail sits consistent. If the old posts were set in concrete, those get pulled or cut flush, which is where a “simple replacement” can stretch an extra day. You’ll decide here whether the new line reuses the old footprint or shifts to reclaim yard space.
Stage 3: Post setting (day 2)
Terminal posts and corner posts get set in concrete, and line posts follow on an 8- or 10-foot spacing depending on height. Holes are typically 2 to 3 feet deep, deeper on gate posts. Sagging, leaning chain link almost always traces back to shallow setting or skipping the concrete. This stage is also where gate hardware gets anchored, so tell us now if you want a self-closing spring or a keyed latch.
Stage 4: Framing and mesh (day 3, usually half a day)
Top rail, tension bands, and the chain link mesh go on and get tensioned. We set the tension bar at the terminal posts and stretch the fabric so it doesn’t oil-can. Your decision here is the gate swing direction and whether you want anything on the bottom of the mesh (a bottom tension wire or a tension bar, which stiffens the fabric against a dog pushing through).
Stage 5: Walkthrough and cleanup (same day, under an hour)
We check the gate for latch alignment, pull the forms, rake the disturbed soil, and walk you the full line. Any adjustment happens now, not three months from now. Then it’s done and you’re back to wondering why you waited on the fence in the first place.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Real Choices You’ll Make Before We Order Material
Chain link isn’t one product. The specs below are what actually drive both the look and the number on the quote.
- Height: 4-foot is common for a front-yard boundary; 5-foot is the usual residential backyard choice; 6-foot is popular where you want a visual deterrent, and it’s the height most people want along an alley. Taller means more mesh, heavier posts, and deeper holes.
- Gauge of wire: 11.5-gauge is the lighter, cheaper standard and fine for a basic yard; 9-gauge is noticeably stiffer and holds up far better to kids, dogs, and balls against it. The upcharge is real but modest per linear foot.
- Coating: Galvanized steel is the value pick and turns a dull gray within a season or two. Vinyl-coated (usually black or green) costs more up front, resists the North Texas sun far better, and stops looking industrial. If your house is brick-veneer 1950s ranch like much of Balch Springs, black vinyl-coated chain link blends into the landscape in a way bare galvanized never does.
- Mesh size: Standard 2-inch mesh for general perimeter; smaller 1-5/8-inch or 1-inch mesh if you’re keeping in something small or blocking a baseball from leaving the yard.
- Gates: A single 4-foot walk gate is standard. A 10- to 12-foot double drive gate costs more in hardware and needs heavier gate posts. Discuss how you’ll use the yard now, because adding a drive gate later means tearing out line.
- Terminal posts: We use thicker-wall posts at corners and gates. Ask whether the quote specifies them, because some bids don’t and that’s where the lean shows up.
What Chain Link Fence Costs in Balch Springs, TX

The honest range is $3,500 – $9,000 for a residential yard here. What pushes a job toward the low end versus the high end comes down to a handful of variables.
- Linear footage and shape: A straight 150-foot backyard runs less than a 250-foot perimeter with six corners and two gates. Every corner is a terminal post and extra concrete.
- Existing fence condition: An old wooden or chain link fence that comes down clean is easy. Deep-set concrete from an old installation, embedded posts, and root systems run the demo cost up.
- Ground and access: Sloped grades need stepped or racked panels, and tight side lots off a narrow Balch Springs alley slow the work down.
- Spec choices: 6-foot 9-gauge vinyl-coated with a drive gate and heavy terminal posts sits at the top of the range. 4-foot galvanized with one walk gate sits near the bottom.
- Permits and floodplain review: Projects touching a flood-prone area along the South Mesquite Creek or Trinity River bottomlands may need a drainage or elevation review before work starts, which adds time and sometimes a permit cost.
A written estimate from us should spell out linear footage, gauge, coating, post spacing, gate count and type, concrete, haul-off, permit handling, and a line-item total with no change orders unless you change the scope. It should not lump it into one round number. Permits we pull and inspections we pass. Financing options are available if you’d rather spread the cost than drain savings. And because a perimeter fence often goes in alongside larger improvements, some homeowners pair this with a full Fence Installation in Balch Springs scope or, if they’re adding a structure with utilities, ADU Site Prep & Utilities in Balch Springs.
See the difference
Before
After
Before
After
Before
AfterWhat Balch Springs Specifically Does to a Chain Link Job
Balch Springs isn’t a greenfield subdivision town. It’s a mostly built-out inner-ring southeast Dallas suburb, and construction here is dominated by infill, redevelopment, and rebuilding on older post-war housing. In ZIP 75180 that means tight lots, older structures, and a small-town permitting culture rather than a big-city one. If you own one of the 1950s – 70s brick-veneer or frame ranch homes common here, there’s a decent chance your existing fence line sits on old concrete footings from a previous installation, and the property line may not be where the old fence was.
The real local driver is the soil and the water. Blackland Prairie clay shrinks and swells hard between the wet spring and the dry summer, and fence posts set too shallow in that clay will heave and lean within a couple of seasons. We set deeper here than a builder would have set a fence 30 years ago. Along the edges of town near South Mesquite Creek and the Trinity River bottomlands, you’re also in or near flood-prone zones, and that changes the calculus: a chain link fence doesn’t block water the way a solid privacy fence does, which is sometimes exactly the point. We cover the full city, from the older residential streets to the rural-feeling acreage lots on the outskirts; see Balch Springs for the neighborhoods we serve. If you’re fencing around a new shop or accessory building, homeowners often pair this with our Door Installation in Balch Springs work once the structure is up.
Serving Balch Springs, TX – Our Local Coverage Area
We serve Balch Springs and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Balch Springs

Most residential jobs are finished in one to three days of active work after the utility locate clears. Small single-gate yards often finish in a day; large multi-corner perimeters with a drive gate take longer. Call (833) 954-4985 for a real timeline based on your property, not an estimate.
Fence permits depend on the height, the location, and whether the property is in or near a floodplain. Balch Springs runs a small-town permitting process, and a yard fence at common heights usually needs less review than a project on flood-prone bottomland near South Mesquite Creek. We handle the permit research and pull it if required, so you’re not chasing the city yourself. Call for the specifics on your lot.
Yes, if posts are set deep enough in concrete. The Blackland Prairie clay under Balch Springs swells and shrinks hard between wet and dry seasons, and shallow-set posts heave and lean. We set terminal posts and line posts deeper than the builder’s-grade standard on purpose. Ask any bid you get how deep they go and how much concrete they use per hole.
It comes out first. Old posts, footings, and concrete have to be removed to set new posts plumb. If your old fence is in decent shape and only needs a section addressed, that’s a repair call, not a new install.
Every Chain Link Fence project is backed by our 730-Day Done Right Promise. That covers workmanship for two full years, which is longer than most fence warranties in this market. If a post heaves or a gate sags within that window, we come back and make it right. Estimates are free, so call (833) 954-4985 to get one scheduled.
Get a Free Chain Link Fence Estimate in Balch Springs
We’ll walk the property line with you, check the ground and any existing fence, and give you a written line-item estimate: footage, gauge, coating, post depth, gate count, permits, and a fixed total. No change orders unless you change the scope. Financing is available, and projects over $10,000 qualify for $1,000 off. Call (833) 954-4985 to schedule your free on-site estimate, or start with our Fence Installation service page if you want the broader scope first.
Written by the team at Groundwork Construction Co.












