







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Rockwall, TX: What to Expect Before You Commit
Cabinets & countertops in Rockwall usually run $14,000 – $45,000 for a full tear-out and replacement, and a typical job takes three to four weeks from demo to final caulk. Most of that time isn’t building anything. It’s measuring, ordering, waiting on the countertop fabricator, and surviving the gap week when your kitchen has no doors and no sink. Call (833) 954-4985 for a free on-site estimate and a written line-item number before you sign anything.
How the work actually moves, stage by stage

We don’t hand you a start date and disappear. Here’s the real sequence, with the decisions landing on you at each step.
Stage 1: Field measure and layout confirmation (day 1, about 3 hours)
We template the existing footprint, check that walls are plumb and floors are level, and confirm appliance locations. This is where layout lives or dies. If your Rockwall home has a slab that’s moved on the clay soils here, we’ll see it now rather than after you’ve paid for countertops that don’t sit flat. You decide the door style and finish at this stage so the order can go in.
Stage 2: Cabinet order and lead time (weeks 1 through 4 or longer)
Frameless versus face-frame, plywood versus particle box, soft-close hardware. Semi-custom KraftMaid or Wellborn lines typically land in four to six weeks, stock cabinets in one to two. You’ll decide drawers versus doors and any pull-out inserts now. This is the longest stretch of the job and the one homeowners underestimate most.
Stage 3: Demo and prep (day 6 to 8)
Out go the old cabinets and countertops, then we patch drywall, correct any soft subfloor, and move the plumbing and electrical stubs if the layout changed. If a load-bearing wall is coming out, that’s a separate structural decision with its own permit and timeline. You decide backsplash tile and sink here; it’s usually paired with Kitchen Remodeling in Rockwall when the scope runs wider than cabinets alone.
Stage 4: Cabinet install (day 9 to 11)
Base cabinets get leveled and shimmed, uppers get hung and screwed to studs, crown and fillers go on. Doors and drawer fronts are hung last so they don’t get knocked around during countertop work. You review drawer alignment before we move on.
Stage 5: Template, fabricate, install countertops (day 12 to 21)
Cambria or granite gets templated only after cabinets are set, because the stone is cut to the real, installed space. Fabrication runs five to ten business days. Sink and faucet go in with the slab. Then backsplash, caulk, and punch list. Total: three to four weeks for a straightforward swap, longer if electrical, plumbing, or permits get involved.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices you’ll weigh, with the honest trade-offs
Every one of these costs differently and holds up differently. Here’s what actually matters.
- Cabinet box material: plywood boxes outlast particleboard in a humid kitchen and hold screws after years of use; particleboard is cheaper and fine for a rental, less so for a forever home.
- Semi-custom versus stock: stock cabinets ship faster and cost less, semi-custom lets you match odd wall heights and angled corners common in older Rockwall houses.
- Door style and finish: painted MDF looks sharp and hides nothing; wood veneer with a clear finish tolerates scuffs better but costs more and can’t be spot-patched invisibly.
- Countertop material: quartz is non-porous and needs no sealing, natural stone shows its character and wants an annual seal, laminate is the budget option and shows every seam.
- Edge profile and cutouts: a standard eased edge keeps cost down; waterfall or thick mitered edges add finish work and a real percentage to the stone price.
- Hardware and inserts: soft-close hinges and full-extension slides are worth the upgrade on every cabinet you’ll open twice a day.
What Cabinets & Countertops costs in Rockwall, TX

Plan on $14,000 – $45,000 for a full cabinets and countertops project in Rockwall. Within that band, a straightforward cabinet install runs $4,000 – $13,000, countertops $2,000 – $6,500, and an island $3,000 – $10,000 if you’re adding one.
Five things push a job toward the top or bottom of that range:
- Linear footage and layout: a galley with 18 feet of run costs far less than an L-shaped kitchen with a peninsula.
- Condition of what’s underneath: water damage, out-of-level floors, or a slab that’s shifted on the clay.
- Moving plumbing or electrical: relocating a sink or range circuit adds trades and time.
- Material grade: stock particleboard and laminate sit at the bottom; semi-custom plywood and quartz at the top.
- Permit scope: a like-for-like swap in Rockwall often needs no permit; moving plumbing, gas, or structure does.
A written estimate itemizes cabinets, countertops, install labor, demo and haul-away, and any plumbing or electrical. It doesn’t include surprises like a failed shutoff valve or a soft subfloor spot, which we flag before work starts, not after.
See the difference
Before
After
Before
After
Before
AfterWhat Rockwall homes specifically do to this job
Rockwall’s housing stock splits into two problems for cabinet work. The bulk of the 75087 and 75032 subdivisions went up in the 1990s and 2010s, so the kitchens are hitting their second decade of wear: hinges sagging, boxes swelling near the sink, and countertops that were fine when installed but now sit on cabinets that have settled. Older houses on the original grid near downtown Rockwall bring the opposite challenge, walls that aren’t square and cabinet runs that need custom fillers. Lakeside customs on the Lake Ray Hubbard side often have large kitchens where the countertop template alone is a bigger job. Blackland Prairie clay moves with the seasons here, and a kitchen slab that shifts will telegraph through to your countertops if we don’t confirm level before ordering. That’s why the field measure and level check come first.
Serving Rockwall, TX – Our Local Coverage Area
We serve Rockwall and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Cabinets & Countertops in Rockwall

Three to four weeks from demo to final punch list, and most of that is cabinet and stone lead time. Cabinet orders run four to six weeks for semi-custom lines, so the calendar stretches well beyond the install days. Call (833) 954-4985 for a timeline tied to your order date.
A like-for-like swap usually needs no permit; moving plumbing, gas, or a load-bearing wall does. Rockwall requires permits and inspections for the structural and trade work, and we pull them and coordinate inspections so nothing gets skipped. Call (833) 954-4985 and we’ll tell you what your scope triggers.
Yes, and that’s the most common job we do. Keeping the sink and range where they are cuts days off the schedule and keeps the price near the bottom of the range. Leaving the layout alone is why many Rockwall swaps land closer to $14,000 than $45,000.
Expect $14,000 – $45,000 for a full project, with cabinet install at $4,000 – $13,000 and countertops at $2,000 – $6,500 as line items. Material grade, layout, and any plumbing or structural changes move the number. Call (833) 954-4985 for a free written estimate with no change-order surprises.
Every cabinets and countertops job is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers our workmanship for two full years. Call (833) 954-4985 with any warranty question.
Ready for a real number on your Rockwall kitchen?
We’ll come out, measure, and hand you a written line-item estimate for cabinets and countertops in Rockwall at no cost. No pressure pitch, no vague range, just the numbers on your actual space. Call (833) 954-4985 and a live person picks up, around the clock. Financing at 0% for 18 months is available, and projects over $10,000 take $1,000 off.
Written by the team at Groundwork Construction Co.












