







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Sachse, TX: Cost, Timeline, and What to Expect
New cabinets and countertops in Sachse typically run $14,000 – $45,000 for a full kitchen, with cabinet installation alone at $4,000 – $13,000 and countertops at $2,000 – $6,500. A standard tear-out and install takes three to six weeks from templating to final plumbing reconnect, and most of that is waiting on fabrication and cure times rather than labor in your house. Call (833) 954-4985 for a free on-site estimate with a written, line-item price.
How the Job Actually Runs, Stage by Stage

Cabinet and countertop work is a sequencing problem more than a construction one. Get the order wrong and you’re paying twice for the same wall. Here’s the real sequence we follow, and what you’ll be deciding at each step.
Stage 1: Field measure and final layout (day 1, 2 – 3 hours)
We measure every wall, check for out-of-square corners and floor level, and confirm appliance sizes and door swing clearances. You’ll decide the layout here: keep the existing footprint, or shift the sink, range, or island. Moving plumbing or a gas line adds cost and a permit; keeping them in place is the single biggest saver on a cabinet job.
Stage 2: Demo and prep (days 2 – 4)
Old cabinets and counters come out, and we open the wall to check for water damage, old valve style, and wiring that needs to move. This is the stage where surprise costs surface, which is why an upfront number matters. If the wall behind the sink is soft from a slow leak, you’ll see it now, not after the new box goes in.
Stage 3: Cabinet install and blocking (days 5 – 8)
Base and wall cabinets get set, leveled, and shimmed, and we install blocking for any cabinet you’ll hang or anchor to. Crown, filler strips, and toe kick go in here. You’ll confirm hardware placement and drawer configuration before we drill a single hole.
Stage 4: Template and fabrication (days 9 – 20)
Countertop templating happens only after the cabinets are locked down and level, because a template is only as good as the boxes under it. Stone fabricates in one to three weeks depending on slab availability and edge profile. You’ll pick the slab, edge, and sink cutout at this stage.
Stage 5: Counter install, backsplash, plumbing (days 21 – 30)
Counters set, undermount sink attached, faucet and disposal reconnected, and the dishwasher and ice maker lines run. Final walkthrough checks door alignment, drawer glide, and every seam. Most kitchens are back in service inside four weeks, though a specialty slab or a full electrical relocation can push it to six.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Make, and What Each One Costs You
Most of the budget swing comes down to four decisions. Here’s how each one actually trades off.
- Stock vs. semi-custom vs. full custom cabinets. Stock boxes are cheapest and fastest but limited to standard widths, so gaps get filled with filler strips. Semi-custom (KraftMaid and Wellborn are common picks) gives you real size options and finishes for a moderate step up. Full custom fits an odd Sachse kitchen perfectly and costs the most, with the longest lead time. Semi-custom is the sweet spot for most of the homes we work in.
- Door material and finish. Painted MDF takes a clean, flat finish and holds up well in a dry climate; solid wood expands and contracts with North Texas humidity swings. Thermofoil is inexpensive but can peel at the edges over time in a hot kitchen. Plywood boxes outlast particleboard around sinks and dishwashers.
- Countertop material. Quartz and granite (Cambria is a solid quartz option) resist staining and don’t need sealing; natural stone needs periodic resealing. Laminate is the budget play and can look good, but it chips and burns. Butcher block warms up a kitchen and needs oiling.
- Edge profile and sink style. A simple eased edge keeps cost down; a thick mitered edge or waterfall end raises it. Undermount sinks cost more to install but are easier to wipe clean than drop-ins.
What Cabinets & Countertops Cost in Sachse, TX

Plan on $14,000 – $45,000 for a full kitchen cabinet and countertop replacement in Sachse, with the number driven by five variables:
- Kitchen size and cabinet count. A compact 10×10 kitchen with 20 linear feet of cabinets sits near the low end; a large, island-heavy layout climbs toward the top.
- Cabinet grade. Stock to full custom can move the cabinet line by $4,000 – $8,000 on the same layout.
- Countertop material and square footage. Laminate to quartz to a premium slab is a real step at each level.
- Plumbing or electrical moves. Relocating a sink, range, or a gas line adds cost and permit scope.
- Existing condition. Water damage, out-of-level floors, or old wiring found during demo.
A written estimate should list cabinets, counters, labor, demo, and disposal as separate lines. What commonly isn’t included: appliance purchase, backsplash tile, and any structural or plumbing relocation uncovered mid-job. Ask up front, because those are the items that turn a bid into a surprise.
See the difference
Before
After
Before
After
Before
AfterWhat Sachse Homes Specifically Do to This Job
Sachse is a small, mostly built-out town on the Dallas – Collin County line (ZIP 75048) where almost every project is infill, a rebuild, or a lot split rather than a new subdivision. That matters for cabinets and countertops because the housing stock is dominated by 1970s – 1990s brick ranch and traditional homes on generous lots, often with a few newer custom builds sitting right beside them. In those older ranches, we routinely find out-of-square walls, floors that have moved, and original plumbing valves that need replacing once the sink cabinet comes out. The Blackland Prairie clay under much of Sachse swells and shrinks with wet-dry cycles, so slab movement shows up as cabinets that won’t sit level without shimming. And because the city’s own permitting and inspection process, not a metro office, is the gatekeeper, plan for it to review any plumbing or electrical changes you make while the cabinets are out. Get the scope right on paper before demo day and the rest runs clean.
Serving Sachse, TX – Our Local Coverage Area
We serve Sachse and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Sachse

Expect three to six weeks from demo to final plumbing, with countertop fabrication the longest single wait. Call (833) 954-4985 and we’ll map the actual schedule for your kitchen.
A straight cabinet and countertop swap usually doesn’t require one, but moving plumbing, gas, or electrical does. We pull the permits and pass the inspections, so call (833) 954-4985 to confirm what your project needs.
Yes, and it’s the best way to control cost. Keeping the sink, range, and island in place avoids permit scope and extra trade work. Call (833) 954-4985 and we’ll tell you what’s possible in your layout.
A full kitchen runs $14,000 – $45,000, with cabinets $4,000 – $13,000 and countertops $2,000 – $6,500 on their own. Call (833) 954-4985 for an exact quote, free and on-site.
Every cabinet and countertop project is covered by our 730-Day Done Right Promise. Call (833) 954-4985 for the written terms before you commit.
Get a Free Cabinet and Countertop Estimate in Sachse
We’ll visit your Sachse kitchen, measure, and hand you a written, line-item price with no change-order surprises. Call (833) 954-4985 and a live person answers, day or night, to book your free estimate. Financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off.
Written by the team at Groundwork Construction Co.












