







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Wylie, TX: Heavy-Duty Answers First
Door installation in Wylie, TX typically runs $550 to $2,400 per door installed, and most single-door jobs are finished in one visit. Exterior entries on acreage properties run toward the top of that range because oversized openings, thicker jambs, and heavier slabs demand heavier hardware, deeper anchoring, and sometimes a reinforced header. If you’re replacing a worn entry, a workshop door, or a set of interior doors that never hung right, call (833) 954-4985 and we’ll walk your opening, confirm the size, and give you a written number before any work starts.
How our door installation process actually runs, stage by stage

Most of Wylie’s acreage and semi-rural properties sit on larger lots with detached workshops, garages, and outbuildings, and those structures were often built with whatever door the builder had on hand. We plan each installation so it’s a one-trip job: measure twice, bring the right slab, and don’t leave a hole in your wall overnight. Here’s the sequence.
Stage 1 – On-site measure and opening inspection (about 45 minutes, day of estimate). We check the rough opening, the square and plumb of the frame, the header, and the sill. On older ranch homes near the Ballard Avenue historic district, this is where we find out whether the existing frame is true or whether it’s racked from years of clay movement. You decide at this stage whether you’re keeping the existing frame or replacing it, and that single choice changes the entire scope and price.
Stage 2 – Material and hardware selection (same day, or within a few days). You pick the slab material, thickness, finish, and hardware. For exterior entries we confirm swing direction, threshold type, and whether you want a multipoint lock or a standard deadbolt. For workshop and outbuilding doors we confirm duty rating, hinge count, and whether a reinforcement plate is needed on the jamb. You approve the written line-item quote here, and there are no change orders after that unless you change the spec.
Stage 3 – Prep and demo (2 to 4 hours). We protect the floor and surrounding trim, pull the old door and hardware, and inspect the framing behind the jamb. If there’s rot, a soft sill, or a header that’s out of level, we document it with photos and tell you before we proceed. On a standard interior door this is quick; on a heavy exterior door with a failed sill it can add half a day.
Stage 4 – Install, shim, and seal (3 to 5 hours). We set the new unit, shim it plumb and square, anchor it per the manufacturer’s spec, and insulate and seal the perimeter. Exterior doors get flashing tape at the head and proper sill pan detailing. Hardware goes on last so nothing gets scratched during the fit.
Stage 5 – Adjust, finish, and walkthrough (1 to 2 hours). We tune the strike plate, check the latch and lock, verify the door closes without dragging, and reinstall trim. Then we walk it with you, show you the warranty paperwork, and leave the site clean. Most jobs are a single day; a multi-door package on a large Wylie property may run two.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The door options you’ll actually choose between
Every installation comes down to a handful of decisions, and each carries a real trade-off. Here’s the honest version.
- Fiberglass exterior doors. Best all-around for North Texas heat and hail exposure. They don’t warp or swell, they take paint well, and they hold up to sun on a west-facing entry. Expect $900 to $2,400 installed depending on size and hardware. This is what we recommend for most Wylie entry doors.
- Steel exterior doors. Strong, secure, and the most affordable exterior option at roughly $550 to $1,200 installed. The catch is denting from hail and eventual rust at the bottom edge if the sill isn’t detailed right. Good for side entries and utility doors.
- Solid wood and wood-clad doors. The premium look, $1,500 to $4,000+ installed. Beautiful on a custom home, but wood moves with our humidity swings and needs refinishing every few years. Worth it if you’re matching an existing aesthetic.
- Heavy-duty workshop and outbuilding doors. On acreage properties these need three or four hinges, a reinforced jamb, and a commercial-grade closer if they’re used daily. A standard residential slab won’t hold up. Budget $700 to $1,800 installed for a properly built unit.
- Interior doors. Hollow-core is the budget pick at $250 to $500 installed; solid-core runs $400 to $800 and cuts sound dramatically between rooms. Slab versus prehung is the other decision – prehung is faster to install and easier to get right, slab requires reusing your existing frame and is only worth it if the frame is in excellent shape.
Brand-wise, we work with PGT and CGI on impact-rated units, and we source Tamko thresholds and weather sealing on exterior entries where the detail matters. Those are our go-to names, not a required list.
What door installation costs in Wylie, TX

For a single door, plan on $550 to $2,400 installed. A whole-house interior door package usually lands between $2,000 and $6,500 depending on door count and whether you go hollow-core or solid. Five variables push a job to the low or high end:
- Door count and size. One standard door sits at the bottom; a package of six or an oversized entry pushes toward the top.
- Existing frame condition. Keeping a true, sound frame is cheap. Replacing a racked frame or a rotted sill adds labor and material.
- Material grade. Steel to wood-clad is a four-figure swing on a single exterior unit.
- Structural or header work. Widening an opening or repairing a header is a separate scope and adds cost – we’ll tell you up front if it’s needed.
- Permit scope. A straight like-for-like swap typically doesn’t require a permit; altering an opening or a load-bearing wall does, and that’s a real line item.
Your written estimate lists the door, hardware, labor, disposal, and any prep work we can see. It does not include rot we can’t see until the old door comes out, or a frame we discover is out of square. We document that with photos before touching it, so there are no surprises on the invoice. Upfront pricing is the whole point.
See the difference
Before
After
Before
After
Before
AfterWhat Wylie homes specifically do to this job
Wylie’s clay soils are the defining factor. The Blackland Prairie vertisols under most of 75098 swell when wet and shrink in drought, and that movement racks door frames over time. On brand-new east-side builds we see doors that won’t latch because the slab has already shifted a fraction; on the older brick ranches near downtown we see jambs that are out of plumb by half an inch after thirty years of seasonal movement. That’s why we check square and plumb before we ever set a door – installing a perfectly square unit into a racked frame just means it won’t close right in two months. It’s also why we don’t quote a door install without looking at the sill and the header. If your project is part of a full Windows & Doors in Wylie scope, we’ll coordinate the whole exterior so the openings and trim match.
Permitting in Wylie is straightforward for a like-for-like swap, but any change to the rough opening, the header, or a load-bearing wall needs a permit and an inspection. HOA rules in the newer subdivisions east and south of town can restrict door color and style on street-facing entries, so check before you order. For the acreage properties with workshops and detached garages, we plan for the drive and access – a heavier unit means a two-person install and equipment on site, and we’d rather bring it once than make two trips.
Serving Wylie, TX – Our Local Coverage Area
We serve Wylie and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – door installation in Wylie

Most single door installations are finished in one visit of four to eight hours. A whole-house interior package or several exterior units usually runs two to three days, and we schedule it so no opening is left unsecured overnight. Call (833) 954-4985 for a timeline specific to your doors.
A straight like-for-like swap generally doesn’t require a permit. Enlarging an opening, changing a header, or cutting into a load-bearing wall does, and we handle the paperwork and the inspection. Call (833) 954-4985 and we’ll tell you which category your project falls into before you commit.
Yes, in the vast majority of cases. Removing and reinstalling a door in the same opening is finish work, not structural work, so plumbing and framing stay untouched. The exception is widening an opening, and we’ll flag that at the measure.
Plan on $550 to $2,400 per exterior or interior door installed, with heavy-duty workshop doors and premium wood-clad entries at the upper end. Call (833) 954-4985 for an exact quote – estimates are free and the price you see is the price you pay.
Every installation is covered by our 730-Day Done Right Promise. If a door we hung doesn’t close properly, drags, or leaks at the threshold, we come back and make it right within that window. The door itself also carries its manufacturer’s warranty.
Get a free door installation estimate in Wylie
If you’ve got a worn entry, a set of interior doors that never fit right, or a workshop door that needs to hold up, we’ll come measure, confirm the spec, and hand you a written number on the spot. Call (833) 954-4985 for a free on-site estimate for Wylie door installation – a live person answers around the clock, and we’ll schedule a time that works. Homeowners often pair this with Cabinets & Countertops in Wylie or a Garage Conversion ADU in Wylie when doors are part of a bigger finish package. Our Windows & Doors team handles the wider scope if your project grows.
Written by the team at Groundwork Construction Co.












