







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Murphy, TX: What It Actually Takes
Door installation in Murphy, TX usually runs $650 to $2,400 per opening, and most single exterior doors are finished in one day. A front entry with sidelights or a set of interior doors across a hallway can stretch to two or three days once trim, paint and hardware are sorted. Call (833) 954-4985 and we’ll walk your specific openings before anyone quotes a number.
How our door installation process runs, start to finish

Door work looks simple until a frame is out of square or a 1990s opening was never sized for what the homeowner wants now. Here’s the sequence we follow on a Murphy door install, and where you make the calls.
Stage 1: On-site measure and opening assessment (day 1, about an hour)
We measure the rough opening, check plumb and square, and look at the framing behind the trim. North Texas clay soil moves, so a door that stuck last summer may sit true this winter. You decide here whether we’re replacing like-for-like or changing the size or swing. That decision drives everything downstream, including whether a permit is needed.
Stage 2: Material and hardware selection (1 to 2 weeks, mostly lead time)
You pick the door slab, the frame material, the finish and the hardware. Entry doors and specialty slabs often carry a two-to-four-week lead time depending on the brand and configuration. We lock the spec, confirm the written line-item quote, and order. Nothing gets demoed until the door is on site.
Stage 3: Demo and prep (install day, 2 to 4 hours)
We pull the old door and trim, inspect the framing and sill for rot or water damage, and repair what we find. Hidden damage is the most common surprise in this job, and we flag it before we build anything back. If the opening needs reframing, that’s a conversation, not a silent upcharge.
Stage 4: Setting, shimming and sealing (install day, 3 to 5 hours)
The new unit goes in plumb, shimmed and fastened, then flashed and sealed at the exterior. Interior trim goes back on. We check the swing, the latch and the weather seal by hand before we call it done. Exterior doors get particular attention here because North Texas wind-driven rain finds every gap.
Stage 5: Final walkthrough and warranty paperwork (same day, 30 minutes)
We walk the install with you, demonstrate the hardware, and hand over the written workmanship coverage. Every project we complete is backed by our 730-Day Done Right Promise: if it isn’t done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
Most Murphy door decisions come down to five real trade-offs. Here’s how they actually play out.
- Steel entry doors – the budget-and-security pick, typically the low end of the range. Dents under impact and needs repainting every several years, but it holds up well against forced entry and suits a garage-to-house or utility door.
- Fiberglass entry doors – the mid-to-upper pick for a front door. Won’t dent or rot, takes a stain or paint finish that mimics wood, and handles North Texas sun and hail better than steel. Costs more up front.
- Solid wood doors – beautiful and heavy, but they move with humidity and need real maintenance. Suits an interior or a covered entry, less so an exposed west-facing front door.
- Interior slab vs. prehung – a prehung unit (door plus frame) is faster and truer to square; a slab hung in an existing frame costs less but shows every flaw in an old jamb.
- Hardware and finish grade – a basic lockset versus a keyed handle set with a deadbolt, and painted versus stained finish, can swing the per-door price by a few hundred dollars on its own.
We keep trusted brand partners across every trade, and for door and trim packages that fit the surrounding woodwork, homeowners often pair this work with Cabinets & Countertops in Murphy when the same remodel touches the kitchen.
What Door Installation costs in Murphy, TX

Expect $650 to $2,400 per door for installation in Murphy, with most single exterior doors landing around $900 to $1,500 installed and interior doors running lower. Here’s what moves a job from the bottom of that range to the top.
- Door type and material – steel at the low end, fiberglass and wood toward the high end. A front entry with sidelights costs more than a plain slab.
- Opening condition – a square, sound frame keeps the price down. Rot, out-of-square framing or a needed reframe adds labor and materials.
- Size and configuration – standard 32- to 36-inch openings are cheapest. Double doors, oversized slabs and sidelights add cost.
- Hardware and finish – premium locksets and stained finishes add a few hundred dollars per door.
- Permit scope – a like-for-like swap usually needs no permit, but changing the opening size or adding a new opening does, and that adds inspection time.
Your written estimate lists the door, frame, hardware, labor, disposal and any trim repair as separate line items, and the number you see is the number you pay. What it doesn’t cover is hidden damage we can’t see until the old door comes out, which is why we flag it before we build back. Estimates are free, so call (833) 954-4985 for an exact quote.
See the difference
Before
After
Before
After
Before
AfterWhat Murphy homes specifically do to this job
Murphy is a small, nearly built-out Collin County suburb, and that shapes door work here in a way it doesn’t in a city still pouring new foundations. Most lots are already occupied, so nearly every job is a remodel or replacement on an existing 1990s-to-2000s brick-veneer home rather than greenfield construction. That means the openings you’re working with were framed decades ago and have been through plenty of North Texas seasons.
The bigger factor is the ground. Murphy sits on expansive black-clay soil that swells when it’s wet and shrinks in the hot, dry summers, and that movement shows up at door frames. We regularly see sticking exterior doors, gaps that open and close with the season, and interior doors that no longer latch because the frame has racked slightly. Because the city is landlocked and fully developed, an HOA architectural review and re-permitting the existing footprint often matter as much as the install itself, so we confirm that early. If your door work is part of a full Windows & Doors in Murphy upgrade, we can scope both together.
Serving Murphy, TX – Our Local Coverage Area
We serve Murphy and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Door Installation in Murphy

A single exterior door is typically a one-day job, and interior doors run a few hours each. Add two to four weeks if the door has to be ordered, since entry slabs and specialty units often carry that lead time. Call (833) 954-4985 to confirm timing for your openings.
A like-for-like swap usually doesn’t require a permit, but changing the opening size or adding a new opening does. We confirm the permit scope before work starts and handle the inspection if one is required. Call us to check your specific project.
Yes, in most cases. A standard replacement fits the existing rough opening, so plumbing and structure stay put. Only a size change or a new opening touches framing, and we flag that before we quote. Call (833) 954-4985 to talk through your layout.
Most jobs land between $650 and $2,400 per door installed, with the exact figure driven by material, opening condition, size and hardware. Estimates are free and itemized, so you see the breakdown before you commit. Call (833) 954-4985 for an exact quote.
Every door we install is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If something isn’t right, we make it right. Call (833) 954-4985 to schedule your free estimate.
Get a free door installation estimate in Murphy
Call (833) 954-4985 to schedule a free on-site estimate for Door Installation in Murphy. We’ll measure the openings, talk through materials and hardware, and hand you a written line-item quote with no surprises. Calls are answered by a live person around the clock, and we also cover nearby Murphy neighbors across the area. If your project reaches beyond doors, our Windows & Doors service covers the rest, and Garage Conversion ADU in Murphy is a natural pairing when a new entry or interior door comes with added living space.
Written by the team at Groundwork Construction Co.












