







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Balch Springs, TX: What the Job Actually Involves
Paver driveways in Balch Springs typically run $7,000 – $18,000 for a standard two-car apron, and most jobs take four to seven working days from tear-out to the final sweep of polymetric sand. The work is a layered build: excavate the old surface, compact a graded base, set edge restraint, lay the pavers, cut the borders, and sand the joints. Call (833) 954-4985 and we’ll walk your driveway and quote it in writing, line by line, before anything gets moved.
How We Build a Paver Driveway, Stage by Stage

Paver work fails or holds based on what happens under the pavers, not on top of them. Here’s the real sequence.
Day 1 – demo and haul-off. We break out the existing concrete, asphalt, or gravel and haul it away. On the older Balch Springs lots this is where surprises surface: a root system from a mature pecan, a buried walkway someone poured over decades ago, or a soft spot where water has been sitting. You’ll see the subgrade before we build on it, and if something changes the scope we tell you before we keep going, not after.
Day 2 – excavation and base. We dig to depth (usually 6 to 9 inches depending on traffic load), then bring in and compact crushed stone in lifts. This is the stage that stops the Blackland Prairie clay from telegraphing up through the pavers. We grade for fall away from the garage and toward the street so water leaves instead of pooling at the slab.
Day 3 – edge restraint and bedding course. A rigid edge is set in concrete along the sides and against the apron. The bedding sand goes down screeded to grade. You decide here whether the field and border layouts match what we marked, and we don’t lay a single paver until you sign off on the pattern.
Days 4 to 5 – laying pavers. The field goes down, then the border course. Cuts happen at the edges, around the apron, and at any radius. On a standard 400 to 600 square foot drive this is the bulk of the labor.
Day 6 (or 7) – compaction and joint sand. We run plate compaction over the finished surface, sweep polymeric sand into the joints, mist it to activate, and clean the face. You get a walkthrough and a care sheet. Most homeowners park on it after 24 hours.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Matter on a Paver Drive
Most of the decisions are made in a single sitting. Here’s what to weigh.
- Paver material. Concrete pavers are the value choice, cost roughly $6 – $10 per square foot for material, hold color well, and suit the price-sensitive Balch Springs market. Clay brick pavers run higher but age with real character. Travertine and natural stone sit at the top of the range, look best on shaded entries, and need more care in our hot summers.
- Thickness and load class. Standard 60mm pavers handle passenger vehicles. If a work truck, boat, or RV sits on the drive, move up to 80mm and add base depth. That’s the honest upgrade most people skip.
- Pattern. Herringbone and running bond are the common picks. Herringbone resists shifting better under turning tires; running bond is faster and cheaper. Basketweave and ashlar patterns read more custom.
- Color and border. A contrasting border course frames the drive and hides edge cuts. It adds a modest line item and finishes the look.
- Drainage approach. On flood-adjacent lots near the South Mesquite Creek side, we may spec a channel drain or a slight crown so runoff doesn’t sit against the garage. That’s a design call made on-site, not a default.
What Paver Driveways Cost in Balch Springs, TX

For a typical two-car drive in ZIP 75180, plan on $7,000 – $18,000. The range is wide on purpose, and here’s what moves you up or down it.
- Square footage. Most of the number is area. A 300 square foot single-car apron sits near the low end; a 700+ square foot drive with a turnaround climbs toward the top.
- Existing surface condition. A clean concrete slab to break out is straightforward. A failed slab with root intrusion or a soft subgrade adds demo and base work.
- Base depth and drainage. Deeper base, a channel drain, or re-grading for fall all add cost, and all pay for themselves by keeping the pavers from settling.
- Material grade. Concrete pavers land at the low-to-middle of the range; clay brick, travertine, and stone push toward the high end.
- Permit and inspection scope. Work that touches the right-of-way or a floodplain edge can require a city permit and inspection, which adds a line item.
Our written estimate covers demo, haul-off, base material, compaction, edge restraint, pavers, cuts, polymeric sand, and cleanup. It doesn’t cover replacing a damaged garage apron or fixing a settling foundation underneath, and we’ll flag either before we start. Upfront pricing, no surprises: the number you see is the number you pay. Call (833) 954-4985 for your free estimate.
See the difference
Before
After
Before
After
Before
AfterWhat Balch Springs Homes Do to This Job
Balch Springs isn’t a greenfield subdivision town. Most of the work here is infill and redevelopment on tight lots with 1950s-to-1970s ranch homes, and that shapes a paver driveway more than most people expect. Driveways are often narrow, hemmed in by a fence on one side and the neighbor’s setback on the other, so layouts get creative. The Blackland Prairie clay underneath swells in spring and shrinks hard in summer, which is why base prep and edge restraint aren’t optional here. And on the lots along the South Mesquite Creek and Trinity River bottomland edges, drainage and floodplain permitting are part of the conversation that neighbors slightly upslope in Mesquite don’t have to have. When you’re ready to widen the project beyond the drive, that’s where our Driveway & Pavers in Balch Springs page picks up the full scope, and homeowners often pair a new driveway with Door Installation in Balch Springs while the front of the house is already torn up.
Why Groundwork for Paver Driveways in Balch Springs
We connect Balch Springs homeowners with independent local professionals who do the work, and we back it with the 730-Day Done Right Promise: if it’s not done right, we make it right. Our technicians have up to 12 years of experience, arrive background-checked and in uniform, and calls are answered by a live person 24/7. James Hardie and Belgard are among the brand partners we draw on, and financing runs at 0% for 18 months with $1,000 off projects over $10,000. Everything we do across the service area is covered on our Balch Springs page, and our Driveway & Pavers service handles the wider hardscape work if you’re also thinking about a walkway or patio.
Serving Balch Springs, TX – Our Local Coverage Area
We serve Balch Springs and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked About Paver Driveways in Balch Springs
Most paver driveways in Balch Springs take four to seven working days, weather permitting. The base and compaction stages are what drive the timeline, and a larger drive or deeper base pushes toward the seven-day end. Call (833) 954-4985 for a firm schedule based on your square footage.
Not always, but some do. A standard replacement within your existing footprint usually doesn’t require a permit, while work that touches the right-of-way or sits near a floodplain edge typically does. Balch Springs runs its permitting more like a small town than Dallas, so we check your specific lot before we quote and pull what’s needed. Call (833) 954-4985 and we’ll confirm what applies to your property.
Rarely, and only if something is buried where the drive goes. Some Balch Springs lots have older walkways or utility lines near the apron. We locate before we dig, so if a move is needed it’s a known line item in the quote, not a surprise mid-job. Call (833) 954-4985 for a free on-site estimate.
Expect $7,000 – $18,000 for a typical two-car drive in ZIP 75180, depending on square footage, existing surface, base depth, and material grade. Our written quote is itemized so you can see exactly what’s driving the number. Call (833) 954-4985 for an exact quote – estimates are free.
Every paver driveway we handle is covered by our 730-Day Done Right Promise. If something settles, shifts, or isn’t right, we make it right within that window. Call (833) 954-4985 and we’ll walk through exactly what the guarantee covers for your job.
Homeowners often pair a new drive with Cabinets & Countertops in Balch Springs when they’re updating the front of the house at the same time.
Get a Free Paver Driveway Estimate in Balch Springs

Call (833) 954-4985 to schedule a free on-site estimate for paver driveways in Balch Springs. On the call we’ll ask about your square footage, the current surface, and any drainage concerns, then set a time to walk the property. You get an itemized written quote with upfront pricing and financing options, and no pressure to sign anything on the spot. Live person, 24/7.
Written by the team at Groundwork Construction Co.












