







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Richardson: What It Costs and How Long It Takes
Concrete Driveways & Concrete Work in Richardson typically run $4,500 – $12,000 for a new pour and 3 – 7 days from demo to first drive, depending on thickness, reinforcement, and how much old slab has to come out. A full replacement with demolition and haul-off usually lands $5,000 – $14,000. Call (833) 954-4985 for a free on-site estimate with a written, line-item quote before anyone touches your slab.
How the Work Actually Runs, From Demo Day to the Day You Park On It

Concrete is a schedule job. The pour is the shortest part of it; everything that decides whether the slab lasts thirty years happens before a single truck backs up. Here’s the real sequence we follow on Richardson jobs, and where you make the calls.
Stage 1: Site walk and layout (day 1, about an hour)
We measure the apron, check slope away from the foundation, and locate the existing expansion joints, utility stubs, and any irrigation or gas lines running under the drive. You decide the width and whether you want a widened apron for a second vehicle. This is also where we flag whether the city will want a permit for the approach.
Stage 2: Demolition and haul-off (day 1 – 2)
Old slab, base, and any broken apron come out with a breaker and skid steer. On Richardson’s older ranch lots the original drive is often 4 inches thick with no rebar and a base that’s pumped or settled, so removal goes faster than you’d expect. Debris leaves the same day in dumpsters, not stacked on your lawn for a week. You decide whether the old concrete stays as fill elsewhere or gets hauled.
Stage 3: Grading, base, and forms (day 2 – 3)
We cut and compact a proper base, set forms to the final grade, and confirm positive drainage away from the house. This is the stage that gets skipped by low bidders and the reason some drives pond water within a year. You sign off on the final layout and any decorative control-joint pattern before we pour.
Stage 4: Reinforcement and pour (day 3 – 4)
Rebar or mesh goes in per the thickness you chose, then the pour. North Texas clay moves, so we cut control joints on a set pattern to direct cracking where you won’t see it. This is a single-day event once the prep is right, and you’ll want to be home to confirm the finish (broom, exposed aggregate, or stamped border).
Stage 5: Cure and drive-on window (day 4 – 7)
Concrete cures slowly. You can walk on it in about 24 hours but should keep vehicles off for roughly 7 days, longer in cool weather. We backfill edges, clean the site, and hand over care instructions. Full strength takes about 28 days; that’s normal and not a defect.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options That Actually Change the Slab You Get
- Thickness (4″ vs 5″ – 6″): 4 inches is standard for a passenger car. A 5 – 6 inch slab with rebar is the right call for heavy trucks, RVs, or a driveway that doubles as a basketball court. It costs more per square foot but resists the clay movement that cracks thin slabs.
- Reinforcement (mesh vs rebar): Welded wire mesh is cheaper and fine for light use; #3 or #4 rebar on a grid is stronger and better on expansive soil. We’ll tell you which your lot actually needs.
- Finish: A broom finish is the safe, slip-resistant standard. Exposed aggregate adds texture and hides tire marks but costs more and is harder to patch. A stamped border gives you a custom look without paving the whole drive in pavers.
- Color and integral pigment: A colored pour (charcoal, sandstone) runs a modest premium and can match brick or stone on the house. It fades slower than a surface stain.
- Drainage detail: A channel drain or a slight cross-slope keeps water off the garage door and away from the foundation. Cheap to add during the pour, expensive to retrofit.
What Concrete Driveways & Concrete Work Costs in Richardson, TX

A standard new concrete driveway in Richardson runs $4,500 – $12,000. A full replacement, including demolition and haul-off, runs $5,000 – $14,000. Those are market-calibrated ranges for a typical two-car drive; five factors push a job toward the top of the range or above it.
- Square footage: Drive length and width are the biggest single driver. A wide apron and turnaround add area fast.
- Existing condition: Rebar, thick old slab, or a base that needs over-excavation on soft clay adds labor and haul-off.
- Reinforcement and thickness: Upgrading from mesh to rebar on a 6-inch slab can add real cost but pays back in longevity.
- Finish and detail: Stamped borders, integral color, and drainage channels each carry a premium.
- Permit scope: A new driveway approach that ties into the city right-of-way may require a permit and inspection, which adds time and a fee.
A written estimate should spell out thickness, reinforcement, base prep, finish, and whether the permit and haul-off are included. What it often doesn’t include in a lowball bid: base compaction, drainage correction, and disposal. Ask. Upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Richardson Homes Specifically Do to a Concrete Job
Richardson’s core is 1950s – 1970s single-story brick ranch homes, many on pier-and-beam foundations, and that shapes concrete work here in ways it doesn’t in a newer single-era suburb. The original ‘Richardson Heights’ plat and the dense post-war blocks near Central Expressway carry narrow lots and older drives that were poured thin, often over a base that’s settled after decades of expansive clay movement. When we pull one of those slabs out, we frequently find no reinforcement and a grade that pitched water toward the garage for years. The city’s aggressive infill and redevelopment posture means demolition and permit inspection are everyday parts of the job on these blocks, not an exception. We work the whole city, from those original plats to the tear-down rebuilds going up on the same small lots. If your drive is part of a larger rework, see our Driveway & Pavers in Richardson page for the wider scope, or our Driveway & Pavers service for the material comparisons.
Serving Richardson, TX – Our Local Coverage Area
We serve Richardson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Concrete Driveways & Concrete Work in Richardson

Most jobs run 3 – 7 days from demo to the point you can drive on the slab, with the pour itself happening around day 3 – 4. Cure continues for about 28 days to full strength, and you’ll want to keep vehicles off for roughly 7 days. Call (833) 954-4985 for a schedule based on your specific lot.
A driveway that ties into the city right-of-way, or one that changes the approach, may need a permit and inspection. A straight replacement within your own property line usually doesn’t. We confirm the requirement for your address during the estimate so nothing surprises you mid-job. Call (833) 954-4985 to get that checked.
All concrete cracks eventually; the goal is controlled cracking at the joints, not random cracking across the slab. Proper base compaction, correct thickness, reinforcement, and a cut control-joint pattern on North Texas clay make the difference. A thin, unreinforced pour on a bad base is what cracks early.
Sometimes a concrete overlay works if the existing slab is sound, but on Richardson’s older drives the base is usually the problem, and an overlay over a failing base just fails faster. We’ll tell you honestly whether a full replacement is the better spend. Call (833) 954-4985 for an on-site look.
Every project we do is covered by our 730-Day Done Right Promise. If something isn’t right, we make it right. Concrete is a long-horizon material, and we stand behind the pour and the prep underneath it. Call (833) 954-4985 and we’ll walk you through what’s covered in writing.
Get a Free Estimate on Your Richardson Concrete Project
Call (833) 954-4985 to schedule a free on-site estimate for Concrete Driveways & Concrete Work in Richardson. We’ll measure the drive, check the base and drainage, confirm any permit needs, and hand you a written line-item quote with upfront pricing. We’re also your team for Richardson concrete work, and homeowners often pair this with ADU Site Prep & Utilities in Richardson or Door Installation in Richardson. Calls are answered by a live person, 24/7.
Written by the team at Groundwork Construction Co.












