







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Garland: Cost, Timeline and What the Job Actually Involves
A paver driveway in Garland typically runs $7,000 to $18,000 and takes three to six working days from demo to final compaction, depending on square footage and site access. You’re replacing a cracked slab with interlocking concrete or clay pavers set on a properly compacted aggregate base. Call (833) 954-4985 and we’ll walk your driveway, measure it and put real numbers in front of you before you commit to anything.
How a Paver Driveway Goes In, Stage by Stage

Paver work is mostly what happens under the pavers. The visible layer is the last 20% of the job, and the base is where a driveway either lasts or settles into ruts after two summers. Here’s the sequence we run.
Stage 1: Site walk and layout (day 1, about 2 hours)
We measure the drive, check slope away from the garage and note where the sprinkler lines, gas riser and downspouts sit. You decide the paver pattern and color family here, not later, because it changes the order. We also confirm the depth of the existing slab or gravel so the base estimate is honest.
Stage 2: Demo and haul-off (day 1 and into day 2)
Existing concrete gets broken and hauled off, usually four to six loads on an average two-car drive. Tree roots from those mature pecans and oaks near the 75040 corridor often intrude on the old slab, and those get cut back and capped so they don’t lift the new base.
Stage 3: Excavation and base build (days 2 into 3)
We dig out to allow 6 to 8 inches of compacted crushed stone, then compact in lifts rather than one pass. This is the step heavy equipment on a soft North Texas clay subgrade punishes if it’s rushed. On Garland lots with poor drainage toward the alley, we’ll add a slight cross-slope and a edge restraint to keep water moving.
Stage 4: Setting bed and paver install (days 3 into 5)
A one-inch bedding sand goes down, then the pavers get laid, cut at the edges and restraint-locked. You’ll want to be home for the final layout check before we cut the field in, since a shifted start line shows up in every following row.
Stage 5: Compaction, sand sweep and cleanup (day 5 or 6)
We run a plate compactor over the field, sweep polymeric sand into the joints, mist it and clean up. The drive is drivable the same day in most cases, though we suggest keeping heavy vehicles off for a short cure window. That’s the whole job, and it’s covered by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Paver Driveways
Most of the decisions on a paver drive come down to four things: material, thickness, pattern and joint sand. Here’s the honest trade-off on each.
- Concrete pavers: The standard choice for Garland driveways. Strong, colorfast and repairable one paver at a time. Runs mid-range on cost and holds up well through our clay soil movement.
- Clay brick pavers: Heavier and pricier, but they wear beautifully and won’t fade. Suits the older ranch homes near downtown Garland where a traditional look fits the block. The trade-off is cost and a slightly longer install.
- Permeable pavers: Open-graded joints that let water drain through. Worth it on lots with poor runoff or HOA drainage rules; costs more in base prep because the stone layers are deeper.
- Paver thickness: 60mm is fine for a car drive. If you regularly park a heavy truck or trailer, 80mm is the safer call and adds modestly to the number.
- Herringbone vs running bond: Herringbone locks tighter against tire spin and looks more finished; running bond lays faster and costs a bit less per square foot.
- Polymeric vs regular joint sand: Polymeric resists washout and weeds, which matters in a region that gets both drought and hard rain. It’s the small upgrade most buyers pick.
What Paver Driveways Cost in Garland, TX

Plan on $7,000 to $18,000 for a full paver driveway install in Garland. A single-car drive with a straightforward slab demo sits near the bottom; a long, wide drive with curves, border accents and heavy tree-root removal pushes toward the top. Five variables move the number more than anything else:
- Square footage: The biggest single driver. A 400 sq ft drive and a 900 sq ft drive are different jobs entirely.
- Existing surface removal: A thick, reinforced slab costs more to break and haul than a thin one or existing gravel.
- Base depth and soil: Soft or poorly drained clay subgrade needs more excavation and stone, which adds labor and material.
- Paver grade and pattern: Clay brick, permeable systems and herringbone layouts all push the price up versus standard concrete pavers in running bond.
- Edges, borders and drainage: Curved edging, soldier courses and added drainage grates are real labor, not decoration.
A written estimate from us lists the square footage, base depth, paver selection and haul-off separately so you can see each line. What typically isn’t included: relocating sprinkler heads or utility lines not visible at the walk, and any grading beyond the drive itself. We flag those before work starts, not after. Our upfront pricing means the number you see is the number you pay, and we offer 0% financing for 18 months plus $1,000 off projects over $10,000.
See the difference
Before
After
Before
After
Before
AfterWhat Garland Homes Specifically Do to a Paver Driveway Job
Garland is largely a renovation market, not a new-build one. The postwar housing that fills 75040, 75041 and 75042 went up across a few booms, and most drives we replace are 40- to 60-year-old slabs sitting on North Texas blackland clay. That clay swells in wet winters and shrinks hard in summer, so we see cracked slabs, settled corners and heaves at the garage apron as the routine failure. The older streets near downtown Garland and along the 75040 corridor also carry those big pecan and oak canopies, which means root pressure on the old slab and roots that need honest removal before a new base goes in. If the paver drive is part of a full Driveway & Pavers in Garland project, we sequence the driveway work around any other exterior upgrades. And because Garland covers several distinct neighborhoods, our crews working Garland plan base depth and drainage around what the lot actually does, not a one-size figure.
Serving Garland, TX – Our Local Coverage Area
We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Paver Driveways in Garland

Most paver driveways in Garland finish in three to six working days. A small single-car drive can wrap in three; a large drive with heavy demo, root removal or curved borders runs closer to six.
Most like-for-like driveway replacements don’t require a permit, but any change to the curb cut, right-of-way or drainage can. We check the specific requirement for your address before we start and pull the permit if one applies.
Paver driveways in Garland run $7,000 to $18,000, with the low end on smaller, straightforward drives and the high end on larger jobs with tree-root removal and premium pavers. Call (833) 954-4985 for a free on-site estimate.
We generally don’t recommend it. Installing over a failed or settling slab transfers the problem upward, so a proper job means removing the old surface and building a compacted base.
Every paver driveway we install is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction.
Get a Free Paver Driveway Estimate in Garland
If you’re ready to replace a tired slab with pavers that hold up through Garland’s clay and heat, call (833) 954-4985 for a free on-site estimate. We’ll measure the drive, talk through material and pattern options and hand you a written line-item quote. Calls are answered by a live person, 24/7, so there’s no voicemail wait.
Written by the team at Groundwork Construction Co.












