







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Garland, TX: What It Takes and What It Costs
Door installation in Garland, TX typically runs $450 to $1,800 per exterior door fully installed, and $250 to $900 per interior door, depending on material, frame condition, and whether the rough opening has to be rebuilt. Most single-door jobs are finished in one day; a whole-house swap of six to eight doors takes two to four days. Call (833) 954-4985 for a free on-site estimate before you commit to anything.
How We Handle a Door Installation, Stage by Stage

Doors look simple until you pull one out of a 1962 frame and find rot, out-of-square studs, or a sill that’s been holding water since the Reagan administration. Here’s the sequence we actually follow.
Stage 1: Measure and confirm (day 1, about an hour)
We measure the rough opening, check the frame for plumb and square, and confirm swing direction, handing, and hardware. You decide material, finish, and glass package at this meeting. On Garland slab-on-grade homes, this is also where we check for threshold damage and water intrusion at the base plate.
Stage 2: Order and schedule (roughly 7 to 21 days)
Stock doors come fast. Custom sizes, special glass, or premium brands like PGT or CGI take longer. You approve the final spec sheet and finish color before anything gets ordered. No surprise upcharges later.
Stage 3: Demo and prep (day of install, 1 to 3 hours per door)
Old door and frame come out, rot gets cut back, and the opening gets squared and shimmed. On a rotted exterior jamb we may add blocking or a new sub-sill. This is the step cheap installers skip, and it’s why doors leak six months later.
Stage 4: Set, seal, and finish (2 to 4 hours per door)
The new door goes in plumb, gets shimmed at hinges and strike, weather-sealed at the perimeter, and flashed at the head and sill. Interior casing and exterior trim go back on. You walk the door and confirm the swing and latch before we close out.
Stage 5: Final inspection and sign-off (same day, 30 minutes)
We test the lock, check the reveal gaps, and confirm the weatherstrip seals. On permitted jobs, we schedule the city inspection and meet the inspector on site. You get the warranty paperwork before we leave.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Your Options for a Door Installation in Garland
Every choice here trades cost against durability, security, and how much upkeep you’re willing to do. Here’s the honest breakdown.
- Steel entry doors – $450 to $1,400 installed. Strong, secure, and the best value for a front door on a Garland ranch home. They dent but don’t rot. Popular for side entries and garages.
- Fiberglass entry doors – $700 to $2,200 installed. Won’t dent or rust, holds paint and stain well, and can mimic wood grain. Best all-around pick for the North Texas climate where humidity swings are brutal.
- Solid wood entry doors – $1,200 to $3,500+ installed. Beautiful, heavy, and the highest security tier when paired with a quality deadbolt. Requires re-finishing every few years against the summer sun. Suits the older brick-veneer homes where the entry is the visual anchor.
- Interior slab or pre-hung doors – $250 to $900 each. Hollow-core is cheapest and fine for closets and bedrooms; solid-core costs more but cuts sound transfer between rooms. Worth it in a busy household.
- Glass and security glass packages – $200 to $800 add-on. Decorative, impact-rated, or laminated security glass reduces break-in risk. If the door is your main entry off an alley or driveway, this is worth the upgrade.
- Hardware and smart locks – $80 to $400. Rolling-code remotes, keypad deadbolts, and smart locks are the modern security standard, and this is where we spend the most time with clients who’ve had a break-in or a lost key.
Windows & Doors hardware can be matched across the house if you’re doing a whole-envelope refresh. If you’re pairing this with interior work, homeowners often schedule Cabinets & Countertops in Garland in the same window so the house is opened up once.
What Door Installation Costs in Garland, TX

Exterior door installation in Garland runs $450 to $1,800 per door installed. Interior doors run $250 to $900 each. Whole-house packages of six to eight doors typically land between $3,500 and $9,000. A permitted exterior door with structural changes can push past $2,500.
Four things move the number:
- Door material and grade – steel at the low end, fiberglass and solid wood at the high end. A custom size adds 20-40%.
- Existing frame condition – rotted sills, out-of-square openings, or termite damage add labor. On 1950s-60s Garland homes, this is common.
- Relocation or structural changes – widening an opening or adding a new door location where none existed means framing, drywall, and often a permit. Add $500 to $2,000.
- Glass, hardware, and finish upgrades – impact glass, decorative panels, and smart locks add $200 to $1,200.
Our written estimate includes demo, disposal, materials, trim, weather-sealing, and labor. It doesn’t include structural repair found after demo or painting and finishing if you’re handling that yourself. We itemize both, so the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Garland Homes Specifically Do to a Door Installation
Garland is one of the largest DFW suburbs where housing went up almost entirely in a few postwar booms: the 1950s-60s core around downtown and the 1970s-80s ranch sprawl toward Rowlett and Sachse. That means almost every door install we do lands on a mid-century slab-on-grade home, and we’re reading original 1960s framing far more often than we’re framing new. In the 75040 and 75041 ZIP codes, mature pecan and oak canopies sit close to the roof, so limbs and root pressure often show up as a settled threshold or a sticking door long before you notice the tree. Blackland clay moving through hot summers and wet winters does the same thing: slab shift throws a door out of plumb, and what looks like a door problem is sometimes a foundation problem. If you’re covering a whole-house refresh along with this work, our Windows & Doors service page explains how door and window schedules get planned together. If you need Garland coverage outside these ZIP codes, we schedule the same way.
Permits depend on scope. Swapping a door in an existing opening usually doesn’t require one; moving a door or changing the opening size typically does. We pull the permit and meet the inspector when required, and we account for HOA rules on front-door color and style before you order.
Serving Garland, TX – Our Local Coverage Area
We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Door Installation in Garland

A single door installation in Garland takes one day, roughly four to eight hours depending on material and frame condition. Whole-house jobs of six to eight doors run two to four days, and we schedule them around your work schedule. Call us to lock in your install date.
If the door goes into an existing opening, no permit is usually required. If you’re relocating a door, widening the opening, or changing an exterior wall, a permit is required in nearly every case. We pull it and meet the inspector on sites that need one.
Yes. A standard replacement in the same opening requires no plumbing or structural changes, and that covers most of what we do in Garland. If you want a door moved or an exterior wall opened up, that becomes a planning question, and we scope it separately before you commit.
Exterior door installation in Garland runs $450 to $1,800 per door installed, and interior doors run $250 to $900 each. Material, frame condition, size, and hardware drive the price. Call (833) 954-4985 for an exact quote, and the estimate is free.
Every door installation we do in Garland is covered by our 730-Day Done Right Promise. If the installation isn’t right, we come back and make it right, at no additional cost to you. Call (833) 954-4985 to schedule your free on-site estimate.
Schedule Your Free Door Installation Estimate in Garland
We’ll come to your home, measure the actual opening, walk you through the door options that fit your entry or interior, and leave you with a written, itemized estimate. No pressure, no phone tag, no vague ballpark. Call (833) 954-4985 and we’ll get you on the schedule for a free on-site estimate in Garland. Our technicians have up to 12 years of experience on this work.
Written by the team at Groundwork Construction Co.












