







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Fence Installation for Richardson Homeowners
A fence in Richardson should do three things: mark the property line, hold the dog in, and survive a North Texas storm season without leaning. Most of the fence problems we see here started with a contractor who skipped the concrete footings or set posts in the wrong soil. Our technicians bring up to 12 years of experience to every install, and we build fences that stay plumb through Richardson’s shrink-swell clay. That black gumbo expands when it rains and contracts in August, and a post set shallow will heave out of it within two summers. We set posts below the frost line in concrete, brace every corner, and back the whole job with our 730-Day Done Right Promise. Call (833) 954-4985 and a live person answers, day or night.
What Our Fence Installation Service Includes
Wood Fence
Cedar and pressure-treated pine are the standards for Richardson backyards, and for good reason: they take stain well, they blend with the mature oaks in neighborhoods like Canyon Creek and Prairie Creek, and they can be built to any height your HOA allows. You need a new wood fence when boards are rotting at the bottom rail, when posts wobble in the wind, or when you’re replacing storm damage that insurance won’t fully cover. We set every post in concrete at the correct depth for Richardson’s clay, use galvanized or stainless fasteners so rust doesn’t streak the boards, and build in expansion gaps so the pickets don’t cup in the summer heat.

Chain Link Fence
Chain link is the workhorse choice for side yards, pet runs, and anything where budget and function matter more than curb appeal. It’s the right call when you need to secure a property line on a corner lot along Central Expressway or want a durable enclosure around a pool pump or AC pad. We install galvanized and vinyl-coated chain link, tension the mesh properly so it doesn’t sag, and set terminal posts in concrete so the whole run stays tight for years instead of going slack by the second season.

Vinyl Fence
Vinyl has become the default privacy fence in newer Richardson developments because it never needs staining, never rots, and cleans up with a garden hose. It’s the right choice when you want privacy without the annual maintenance a wood fence demands, particularly on west-facing runs that take the full afternoon sun. We install Bufftech and other quality vinyl systems with reinforced bottom rails and aluminum inserts in the posts, because a hollow vinyl post in Texas heat will bow over time and a reinforced one won’t.

Aluminum Fence
Aluminum gives you the look of wrought iron without the rust, which makes it the go-to for pool enclosures and front-yard fencing where Richardson code and HOA rules require an open sightline. You want aluminum when you need a fence that meets pool safety requirements without blocking the view, or when your HOA prohibits solid privacy fencing in the front yard. We install Ameristar and similar ornamental aluminum systems, set posts in concrete, and rack the panels to follow grade so the top rail runs level on a sloped lot instead of stepping awkwardly.
Iron Fence
Wrought iron is the heavy-duty option for homeowners who want a true permanent boundary, and it’s common on larger lots in Lucas and Fairview where property lines run long. It’s the right pick when you want security, curb appeal, and a fence that will outlast the house. We install ornamental iron with welded or pressed pickets, powder-coated finishes that resist chipping, and footings sized to the weight of the panels so gates don’t drag after the first year.
Fence Repair
Not every fence needs replacing. Plenty of Richardson fences just need a handful of posts reset, a sagging gate rehung, or a run of storm-damaged pickets swapped out. Repair makes sense when the structure is sound and the damage is localized, and we’ll tell you honestly when a repair is throwing money at a fence that’s past saving. We inspect the whole run, check post soundness at the soil line, and give you a written recommendation before any work starts.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Fence Installation
We work with Ameristar ornamental aluminum regularly, and we know exactly where those systems wear: the hinge welds on gates take the most stress, and a gate that’s hung without the right post footing will sag within a season no matter how good the panel is. We also install Bufftech vinyl, and we’ve learned that the difference between a vinyl fence that lasts 20 years and one that bows in three comes down to post reinforcement and how the bottom rail is anchored, not the brand name on the box.
Master Halco and Jerith come up often too, particularly on iron and aluminum work, and we’ve handled enough of both to know their gate hardware and how it holds up to Richardson’s temperature swings. Whether your property already has Ameristar panels you want matched, a Bufftech run you need extended, or you’re starting fresh with any other make, we can help. We’ll match profiles, colors, and heights so the new section looks like it was built with the old one.
Signs You Need Fence Installation Right Now
- Posts that wobble when you push on them. A post that moves at the base has lost its footing, usually because it was set in dirt instead of concrete or didn’t go deep enough for Richardson’s clay. Once a post rocks, the wind will work it looser every storm until the whole run leans.
- Boards rotting at the bottom rail. Rot starts low where moisture wicks up from the soil and grass stays damp. If the bottom two feet of your pickets are soft, the fence is failing from the ground up and patching won’t stop it.
- Gaps between pickets or panels pulling apart. Shifting soil and missing fasteners let panels separate, which opens sightlines you didn’t plan on and weakens the whole structure. Separation along a run usually means the posts have moved.
- A gate that drags, sticks, or won’t latch. Gates carry the most stress of any part of a fence. When a gate sags, the hinge post is usually the culprit, and a rehang on a failing post won’t hold.
- Storm damage, leaning runs, or a fence down along one side. North Texas hail and straight-line winds are hard on fences, and a run that’s leaning after a storm may be repairable or may be done. We inspect the footings before recommending either.
Our Fence Installation Process – Step by Step
- 1
Free on-site estimate and design consult. We walk the property line with you, measure the full run, check the existing posts and footings, and talk through material options and HOA or city rules. You get a written line-item quote with upfront pricing, so the number you see is the number you pay.
- 2
Permits and utility locating. Where a permit is required, we pull it and handle the inspection. We also call for utility locates before anyone digs, because cutting a sprinkler line or a gas service is a bad way to start a project.
- 3
Demolition and site prep. We tear out the old fence, haul it off, and clear the line. Post holes get dug to depth and checked against Richardson’s soil conditions, since clay here needs deeper footings than sandy ground.
- 4
Posts set in concrete, then the build. Every post goes in concrete and gets braced until it cures. Then we hang rails, set pickets or panels, and mount gates with hardware sized for the load. We rack panels to follow grade on sloped lots and check every gate for swing and latch before we call it done.
- 5
Final walkthrough and cleanup. We walk the finished fence with you, confirm heights, gates, and alignment, and clean the site. The work is covered by our 730-Day Done Right Promise, and if something isn’t right, we make it right.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fence Installation Cost in Richardson?

Fence installation in Richardson typically runs $3,500 to $9,000, depending on material, linear footage, and how many gates you need. A typical wood privacy fence for an average backyard lands in the lower half of that range, while a vinyl or aluminum install with custom gates pushes toward the top. Here’s how the common options break down by material:
| Fence Type | Typical Richardson Range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
What moves the price: total linear feet, fence height (6-foot privacy vs. 4-foot decorative), material choice, the number and style of gates, terrain (a sloped lot in Lucas or Fairview needs more posts and racking), and whether old fence removal is included. You avoid overpaying by getting a written line-item quote that separates materials, labor, and removal, and by confirming the permit cost is spelled out rather than tacked on later. Our free estimate includes all of it: measurement, material options, permit requirements, and a fixed number with no change orders. If you have a project over $10,000, we also take $1,000 off, and 0% financing for 18 months is available.
Fence Installation Near Richardson – Our Service Area
We install fences across Richardson and the surrounding communities, including Garland, Murphy, Sachse, Allen, Rowlett, Wylie, Fairview, Sunnyvale, McKinney, Rockwall, and Lucas. Response times depend on the schedule, but we get estimates out quickly and keep you updated from first call to final walkthrough. If you’re comparing options across the area, take a look at our Fence Installation in Garland and Fence Installation in Murphy pages for the same pricing guidance in those markets.
Serving Richardson, TX – Our Local Coverage Area
We serve Richardson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fence Installation in Richardson

Fence installation is the process of building a new fence line from the ground up: setting posts in concrete, hanging rails and panels or pickets, mounting gates, and finishing the run to your property line. It includes measuring the line, checking for utility conflicts, pulling any required permits, and removing the old fence where needed. We handle all of it as one job, from foundation to finish line, and back the work with our 730-Day Done Right Promise. Call (833) 954-4985 for a free estimate.
Most residential fence installations in Richardson are completed in one to three days, depending on linear footage and material. A standard backyard wood or vinyl privacy fence is often a single-day or two-day job. Larger runs with multiple gates, or iron work on long property lines, can stretch longer. We give you a realistic timeline in the written estimate, not a guess on the phone.
Fence installation in Richardson typically costs $3,500 to $9,000, with vinyl running $3,500 – $9,000 and aluminum $4,000 – $10,000. Total footage, fence height, gates, and terrain are the biggest factors. We give you a fixed, line-item quote up front so there are no surprises once work starts. Call (833) 954-4985 for an exact quote; estimates are free.
Yes. We install and service Ameristar ornamental aluminum and Bufftech vinyl, along with Master Halco and Jerith systems. We know where these products wear, from gate hinge welds to vinyl post reinforcement, and we match existing profiles and colors when extending or repairing a run. If you have any other make, we can help with that too.
We answer calls 24/7 with a live person, so if a storm takes down a section of fence, you can reach us right away and we’ll get a plan in motion. For a genuine emergency like storm damage or a downed section leaving a pool or pet exposed, call (833) 954-4985 and we’ll discuss the fastest available option. For planned installs, we schedule your estimate at a time that works for you.
Every fence we install is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If something isn’t right within that window, we come back and make it right. That covers our workmanship, and material warranties come from the manufacturer based on the product you choose.
Clear the fence line of furniture, grills, hoses, and anything else in the work area, and make sure gates are unlocked so the crew can get through. Mark any sprinkler heads or invisible fence lines so we don’t hit them during digging, and keep pets indoors while the crew is on site. We handle the utility locates and haul-away, so you don’t need to do anything beyond clearing access.
Schedule Your Fence Installation Service in Richardson Today
Whether you need a new privacy fence, a repair on a storm-damaged run, or a commercial install, Groundwork Construction Co. of Richardson is ready to give you a straight answer and a fixed price. You’ll get background-checked, uniformed technicians, a free estimate and design consult, and $1,000 off any project over $10,000. Call (833) 954-4985 today and a live person will pick up. Learn more about how we work.
Written by the team at Groundwork Construction Co.












