







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Asphalt Driveways & Resurfacing in Murphy, TX: What It Takes and What It Costs
Asphalt resurfacing in Murphy usually means a new 2-inch hot-mix overlay over a sound existing base, and most residential driveways here run $3,500 – $9,000 for full paving or $5,000 – $14,000 when the old surface has to come out first. Plan on two working days for a standard two-car driveway: one day for prep and one for the overlay, plus a short cure before you park on it. Call (833) 954-4985 for a free on-site estimate.
How We Actually Build an Asphalt Driveway in Murphy

Asphalt work rewards patience at the front end and punishes shortcuts later. Here’s the sequence we run, and where you make decisions.
Stage 1: Site visit and base assessment (day of estimate)
We walk the driveway and probe the base, because the number that matters isn’t the asphalt thickness – it’s whether the subgrade is still holding. On Murphy’s black-clay soils, a driveway that looks fine on top can be riding a base that has heaved or settled after a wet spring. You’ll get a written line-item quote that separates base work from surface work, so you can see exactly where the money goes.
Stage 2: Demo and grading (day 1, morning)
If the existing surface is failing, we mill or break it out and haul it off. A typical two-car apron and drive takes three to five hours to remove. Then we re-grade to shed water away from the slab and garage threshold – in a Murphy subdivision, that often means working within a fixed setback and drainage pattern you can’t change. You’ll decide here whether to widen the drive or add a turnaround, since doing it later costs more.
Stage 3: Base prep and compaction (day 1, afternoon)
We bring in crushed limestone, spread it in lifts, and compact each lift before the next goes down. Skipping the lift-by-lift compaction is the single most common reason a North Texas driveway cracks within five years. If we find soft spots, we dig them out and replace the material rather than paving over a problem.
Stage 4: Paving and rolling (day 2)
Hot mix arrives at temperature and gets laid at 2 inches compacted for residential traffic, then rolled while it’s still workable. Edges get tamped and shaped. This is the day you can’t drive on it, and you should plan to park on the street overnight.
Stage 5: Cure and walkthrough
Asphalt cures from the outside in. You can walk on it the next day, drive on it in about 48 hours, and should keep heavy loads off it for the first couple of weeks. We do a final walkthrough with you and put the workmanship in writing under our 730-Day Done Right Promise – if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Murphy Asphalt Work
- Full-depth paving vs. overlay. A new build from the base up is the right call when the subgrade has failed; an overlay is cheaper and faster when the base is solid. Overlaying a broken base just transfers the cracks upward, so we tell you honestly which one you’re buying.
- Hot-mix asphalt grade. Standard residential mix suits most drives. A heavier mix costs more but holds up better under trailers, RVs, or a work truck parked on it daily.
- Sealcoat timing. Fresh asphalt should cure three to six months before its first seal. A quality sealer extends life and restores the deep black finish, but sealcoating a new driveway too early traps solvents and shortens its life.
- Edging and borders. Concrete or stone edging holds the asphalt edge in place, which matters on Murphy lots with tight side yards. Simple compacted shoulders cost less but need more upkeep.
- Drainage additions. A channel drain or a graded swale keeps water off the drive after our summer storms. It’s a modest add-on that prevents the ponding that eats asphalt from underneath.
What Asphalt Driveways & Resurfacing Costs in Murphy, TX

Most Murphy asphalt driveway projects land between $3,500 and $9,000 for new paving, and $5,000 to $14,000 when full replacement is needed. Sealing an existing drive runs $250 – $700. Five things push you toward the high end:
- Square footage. A single-car apron versus a long drive with a turnaround is the biggest driver.
- Base condition. Soft clay, old tree roots, or a failed subgrade means excavation and new base material, which adds real dollars.
- Demo and haul-off. Removing and disposing of old concrete or asphalt is a line item, not a freebie.
- Access. A narrow gate or a drive blocked by a fence slows the crew and adds labor.
- Drainage work. Adding a drain or regrading to code adds cost but protects the investment.
Your written estimate lists base prep, material, compaction, and cleanup separately, so the number you see is the number you pay – no change orders halfway through. Call (833) 954-4985 for an exact quote; estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Murphy Homes Do to This Job
Murphy is a nearly built-out Collin County suburb in ZIP 75094, and that changes how driveway work happens here. Most of the housing stock went up in the 1990s and 2000s, so we’re almost never paving a greenfield lot – we’re replacing a 20- to 30-year-old drive on a lot that’s already fully landscaped, fenced, and reviewed by an HOA. That means the existing footprint, the fence-line setback, and HOA architectural approval matter as much as the asphalt itself. The other local reality is our black-clay soil: it expands and shrinks with every wet-dry cycle, and after a hot summer we routinely see driveways that have heaved at the apron or cracked along the garage threshold. Those are base failures, not surface problems, and paving over them is money thrown away. Many Murphy homeowners pair a new drive with Chain Link Fence in Murphy work along the property line, or with ADU Site Prep & Utilities in Murphy when they’re adding a structure that needs its own access. If you’re weighing asphalt against other surfaces, our Driveway & Pavers in Murphy page covers the wider scope, and you can see everything we handle on the Driveway & Pavers hub or our Murphy service-area page.
Serving Murphy, TX – Our Local Coverage Area
We serve Murphy and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Asphalt Driveways & Resurfacing in Murphy

A standard two-car driveway takes two working days on site, plus about 48 hours before you drive on it. Larger drives, or ones that need full demo and haul-off, can stretch to three or four days. We give you a firm timeline in the estimate so you can plan parking. Call (833) 954-4985 to schedule your free estimate.
Replacing a driveway in the same footprint generally doesn’t require a building permit, but widening it, changing drainage, or altering the approach may. Because Murphy is essentially landlocked and fully developed, the city and your HOA both care about the existing footprint. We pull what’s required and walk you through it. Call (833) 954-4985 and we’ll sort out what your project needs.
Sometimes, and only if the base is sound. An overlay works well when the existing asphalt is stable with minor surface wear. If we find heaving, alligator cracking, or a soft base, an overlay will fail, and we’ll tell you straight. Our estimate separates overlay and full replacement costs so you can decide with real numbers. Call (833) 954-4985 for an assessment.
No – your written estimate is fixed for the scope we quote. The only way the number moves is if you add work, like a drainage line or a wider apron, and we price that in writing before we touch it. Upfront pricing, no surprises. Call (833) 954-4985 for your exact quote.
All our work is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it applies to base prep, compaction, and surface work alike. Call (833) 954-4985 to get started.
Ready to Price Your Murphy Asphalt Driveway?
Call (833) 954-4985 for a free on-site estimate on asphalt driveways & resurfacing in Murphy. A live person answers around the clock, and we’ll assess your base, walk the options, and hand you a written line-item quote – no voicemail, no surprises. Financing at 0% for 18 months is available, and projects over $10,000 take $1,000 off.
Written by the team at Groundwork Construction Co.












