







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ADU Design & Permitting in Garland, TX: What It Takes to Get One Approved
ADU design and permitting in Garland usually runs $45,000 – $130,000 depending on size and whether you’re converting or building new, and the design-and-permit phase alone takes 3 to 6 months before a shovel hits dirt. The design drawings, the site plan, the zoning check, and the city’s plan review are the slow part, not the build. Call (833) 954-4985 to schedule a free on-site estimate and we’ll walk your lot, your setbacks, and your existing slab before anyone draws a line.
How the Design and Permitting Process Actually Runs

Most homeowners picture a single meeting and a rubber stamp. It’s more like five stages, and you make a real decision at each one. Here’s the sequence we follow on Garland lots.
- 1
Stage 1: Site visit and feasibility, days 1 – 3. We measure the lot, check setbacks and impervious cover limits, and locate the existing utility taps. You decide the footprint and whether you’re building detached or converting existing space under roof. This is where we flag whether your 75040 or 75041 lot has room for the size you want.
- 2
Stage 2: Schematic design, weeks 1 – 4. Floor plan, elevations, and roof tie-in drawings. You choose the layout: studio, one-bedroom, or two-bedroom. We hand you two or three options with rough cost attached so you’re not designing something you can’t afford.
- 3
Stage 3: Construction documents, weeks 4 – 8. Full architectural set, structural engineering for the slab and framing, energy code compliance, and a sealed survey. You decide on finish grade now, because it locks the budget. This is also when we pull the plat and check your deed restrictions.
- 4
Stage 4: Permit submittal and plan review, weeks 8 – 16. We file with the city, respond to reviewer comments, and coordinate the separate trade permits for electrical, plumbing, and mechanical. You sign off on any revision the reviewer requires. Comment rounds are the single biggest variable in timing here.
- 5
Stage 5: Permit issuance and pre-construction, weeks 16 – 20. Once the permit’s in hand we schedule inspections, finalize the material order, and set the build calendar. You approve the final line-item scope and lock pricing before framing starts.
Total design-and-permit window: roughly 4 to 5 months on a clean project, longer if the site plan gets bounced back. The build itself typically adds another 4 to 6 months for a detached unit, less for a conversion. We keep you in the loop at every comment round so you’re never guessing where your file sits.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Make Between Design and Framing
A Garland ADU budget swings hard on a handful of decisions. Here’s what you’re actually picking between, with the honest trade-offs.
- Detached new build vs. converting existing space. A detached unit gives you clean separation and full control of layout but carries the highest all-in number. A conversion is cheaper per square foot but constrained by existing walls and plumbing.
- Slab-on-grade vs. pier-and-beam. Most Garland ADUs go slab-on-grade, which is faster and cheaper. Pier-and-beam costs more up front but handles the blackland clay movement better and keeps plumbing accessible.
- Stick-framed vs. structural insulated panels. Stick framing is the standard and easy to permit. SIPs cost more but go up faster and hold temperature well through a Texas summer.
- Site-built vs. modular shell. A modular shell can shave weeks off the framing stage but ties you to a factory schedule and limits custom tie-ins to the main house roofline.
- Finish grade. Builder-grade vinyl and laminate keep the number down. Hard-surface counters, real tile in wet areas, and impact-rated windows push the total up but hold value and survive hail season better.
You don’t have to pick all of this on day one. We present each trade-off with a dollar figure attached so the choice is yours, made with real numbers instead of a shrug.
What ADU Design & Permitting Costs in Garland, TX

Here’s the range we quote on Garland projects, broken out by what you’re actually paying for.
| Line item | Typical range |
|---|---|
| Architectural design and drafting | $3,500 – $9,000 |
| Structural and civil engineering | $1,500 – $4,000 |
| Survey and site plan | $600 – $1,800 |
| City permit and plan review fees | $1,200 – $4,500 |
| Design-and-permit subtotal | $6,800 – $19,300 |
| Full ADU build (design through completion) | $45,000 – $130,000 |
Four variables push a job toward the high end. Size is first: a 400-square-foot studio and a 1,000-square-foot two-bedroom live in different worlds. Second is site condition, and on clay soils that means footing depth and drainage work. Third is how much you’re relocating existing plumbing, electrical, and structure, since every moved drain line adds trade cost. Fourth is finish grade. Permit scope is the fifth: a project that triggers a separate grading or driveway change can add another review cycle.
What’s in a written estimate: design fees, engineering, survey, permit fees, and a line-item build scope with fixed pricing. No-hassle upfront pricing means the number you see is the number you pay; we don’t come back mid-build with a change order for work that was in the drawings. What’s typically outside it: foundation leveling if the existing slab needs correction first, and any HOA review fees if your subdivision has a design committee. Call (833) 954-4985 for an exact quote on your lot, and estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Garland Homes Specifically Do to This Job
Garland’s housing went up in a few postwar booms: the 1950s-60s core near downtown, then the 1970s-80s ranch sprawl toward Rowlett and Sachse. That matters here because almost every ADU project in Garland is layered onto an existing mid-century slab-on-grade house, not a fresh lot. We read original 1960s framing and plumbing plans far more often than we start from a blank sheet, and the ADU has to tie into a structure that’s already moved with the clay for six decades.
That blackland clay expands and contracts through hot summers and wet winters, so we check the existing foundation before we design footings. The mature pecan and oak canopies near downtown and along the 75040/75041 corridors come with tree-root foundation pressure and low limbs over any new roof line, which changes site prep and trim-out compared to the open lots east toward 75044. And the 75049, 75040, 75041, and 75042 ZIPs each bring their own lot sizes, so setbacks and impervious cover get checked property by property. Permitting runs through the city’s plan review and inspection process, and we pull the permits and take the inspections to passed. Across the Garland area we read the deed restrictions too, since older plats often carry covenants the current owner never saw.
Serving Garland, TX – Our Local Coverage Area
We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: ADU Design & Permitting in Garland

Expect 3 to 6 months from the first site visit to permit in hand, with the city’s plan review the slowest stage. Comment rounds push it longer. Call (833) 954-4985 and we’ll give you a realistic schedule for your specific lot.
Yes. An ADU of any size requires a building permit plus separate electrical, plumbing, and mechanical permits. Skipping the permit risks a stop-work order and can kill your ability to sell later. We handle the submittal and inspections; call for a free feasibility walk.
Often, yes, especially in a conversion where the existing wet wall and slab can be reused. Keeping plumbing in place is the cheapest route. We’ll tell you honestly at the site visit whether your layout allows it. Call (833) 954-4985.
Budget $45,000 – $130,000 all-in, with the design-and-permit phase alone at roughly $6,800 – $19,300. Size, site condition, relocated services, finish grade, and permit scope move the number. Call for a line-item estimate; estimates are free.
Every ADU project is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it’s in writing. Call to start your estimate.
Get Your Garland ADU Priced Before You Design
A free on-site estimate for ADU design and permitting in Garland starts with a walk of your lot, a check of setbacks and utilities, and a straight conversation about what fits. We’ll tell you the realistic timeline, the permit path, and a line-item price range before you commit to drawings. This is one piece of the bigger picture covered by our Home Additions & ADU service, and many Garland homeowners pair it with Paver Driveways in Garland for the new unit’s access path or Chain Link Fence in Garland to separate the rental yard. For the wider project scope, see Home Additions & ADU in Garland. Call (833) 954-4985 and a live person answers, day or night.
Written by the team at Groundwork Construction Co.












