







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Richardson: What the Job Actually Involves
Cabinets & Countertops in Richardson runs $14,000 – $45,000 for a full kitchen’s worth of both, and most of our jobs land between three and five weeks from demo to final walkthrough. The number that matters most is the cabinet line: box construction, door style, and whether your Richardson home is pier-and-beam (leveling enters the picture) or slab. Call (833) 954-4985 for a free on-site estimate with a written line-item quote, and we’ll price cabinets and counters separately so you can see exactly where the money goes.
How We Run a Cabinet and Countertop Job, Start to Finish

Kitchens are disruptive, and the sequence is what keeps them from falling apart. Here’s the order we follow, and where you make the decisions.
Stage 1: Measure and template (day 1)
We take field measurements and check the walls for plumb and square. In Richardson’s older ranches that check matters more than people expect: original walls are rarely straight, and a 1950s corner that’s out by half an inch changes how cabinets get scribed and filled. You confirm door style, finish, and box material at this stage, because cabinet lead times drive the whole schedule.
Stage 2: Demo and prep (days 2 – 3)
Old cabinets and counters come out, and we inspect what’s behind them: water damage under the sink, worn shutoffs, electrical that isn’t up to current code. This is the stage where surprises surface, which is why the estimate includes a walkthrough of likely hidden conditions before we start. Any plumbing or electrical you’ve asked us to relocate gets roughed in here.
Stage 3: Cabinet install (days 4 – 7)
Bases and uppers get set, leveled, and shimmed, then fastened to studs. On pier-and-beam floors we check for sag before setting boxes; a floor that slopes a quarter inch over six feet will show up as uneven counter seams later if it isn’t addressed now. You’ll decide hardware placement and any pull-out or organizer upgrades before this stage, not during it.
Stage 4: Template and counter fabrication (days 8 – 15)
Once cabinets are set, the counter gets templated with a physical jig. Stone and quartz are cut from that template, so the fabricator’s turnaround is the longest single wait in the project. You pick edge profile and sink cutout before templating. This is the quiet week where the kitchen looks done but nothing’s usable yet.
Stage 5: Install, hookup, and punch list (days 16 – 21)
Counters go in, the sink and faucet get set, and we check every drawer and door for alignment. Final inspection happens here if the scope needed a permit. You walk the kitchen with us, and anything that doesn’t meet the finished standard gets fixed under our 730-Day Done Right Promise before we call the job closed.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
What You’ll Choose Between: Cabinets, Counters, and the Trade-Offs
The spec decisions below are where a $14,000 job turns into a $35,000 one. Here’s the honest version of each.
- Stock cabinets: Low end of the cabinet budget, fixed sizes, limited finishes. Fastest lead time. Fine for a tight rental or a flip, frustrating when a wall doesn’t fall on a standard increment.
- Semi-custom cabinets: The middle path most Richardson homeowners pick. Adjustable widths and depths, more door styles, lead times usually four to six weeks. KraftMaid is a solid choice here.
- Full custom: You pay for exact fit and unusual configurations. Expect the top of the range and the longest schedule.
- Quartz: Non-porous, no sealing, holds up to Texas humidity swings. The most common counter choice. Cambria is worth pricing.
- Granite: Natural variation, heat-tolerant, needs sealing roughly once a year. Beautiful and heavy.
- Laminate: The budget option. Fine for a secondary kitchen or a rental, but seams and edge wear show within a few years.
- Butcher block or solid surface: Warm look, repairable surface. Wood needs regular oiling and doesn’t love a sink cutout.
Two other decisions matter more than buyers expect. Sink type (undermount vs. drop-in) affects the counter cutout and the price. And whether you’re keeping the existing layout: moving a sink or range means plumbing and electrical work that pushes the budget up fast.
What Cabinets & Countertops Costs in Richardson, TX

Cabinets & Countertops in Richardson starts at $14,000 and runs to $45,000 for a full kitchen with both. Cabinet installation alone lands between $4,000 and $13,000, and countertop installation between $2,000 and $6,500. Below, the numbers that move the total.
| Line item | Typical range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Full cabinets & countertops scope | $14,000 – $45,000 |
What pushes a job toward the high end: total linear footage and whether you’re doing one wall or all four; cabinet grade (stock vs. semi-custom vs. custom); counter material and edge profile; relocating plumbing, electrical, or a wall; and permit scope if the layout changes. What keeps it near the low end: keeping the existing footprint, semi-custom boxes, quartz over granite, and staying with the sink and range where they sit. Every written estimate breaks these out line by line, so there are no change orders surprise-billing you later. Call (833) 954-4985 for an exact number.
See the difference
Before
After
Before
After
Before
AfterWhat Richardson Homes Specifically Do to This Job
Richardson’s core is 1950s – 1970s single-story brick ranch homes, many on pier-and-beam foundations, and that’s the housing stock that shapes most of our kitchen work here. On pier-and-beam floors, wall and floor movement over sixty years shows up as out-of-level cabinet runs and counter seams that crack if the substrate is left alone. We check floor level before setting boxes on every Richardson job. The other local reality is the clay soil: it expands and contracts with every wet and dry cycle, which is why older slabs and pier foundations in Richardson need a look before cabinets go in, not after. Permits matter here too. Richardson’s infill and redevelopment posture means demolition inspection and permit review are routine, so if a layout change touches plumbing, electrical, or walls, expect a permit and an inspection as part of the schedule, not an afterthought. If your kitchen is part of a full Kitchen Remodeling in Richardson project, we fold cabinet and counter scope into the larger plan so the trades don’t collide. We cover the whole city, and you can see the neighborhoods we work on our Richardson service-area page.
Serving Richardson, TX – Our Local Coverage Area
We serve Richardson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Cabinets & Countertops in Richardson

Most Richardson cabinets & countertops projects take three to five weeks from demo to final walkthrough. The single biggest variable is counter fabrication, which waits on the template and typically runs seven to ten days; cabinet grade affects lead time too. Call (833) 954-4985 and we’ll map your actual schedule against lead times before you commit.
If you’re keeping the existing layout, a straight cabinet and counter swap usually doesn’t need a permit. The moment you relocate plumbing, electrical, or a wall, a permit and inspection enter the picture, and we pull those and pass the inspection as part of the estimate. We’ll tell you at the walkthrough which category your job falls into.
Yes, and keeping the footprint is the single biggest cost saver. Staying with the existing sink and range location, and leaving walls alone, keeps you in the $14,000 – $25,000 band more often than not. Moving a sink or knocking out a wall pushes toward the top of the range fast. Call (833) 954-4985 to price both scenarios before you decide.
A full cabinets & countertops scope in Richardson runs $14,000 – $45,000, with cabinet installation at $4,000 – $13,000 and countertop installation at $2,000 – $6,500. Cabinet grade, counter material, and layout changes drive the spread. Call (833) 954-4985 for an exact quote; estimates are free and itemized.
Every cabinets & countertops job is covered by our 730-Day Done Right Promise, which means if the workmanship isn’t right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it’s in writing. Call (833) 954-4985 to schedule your free on-site estimate.
If you’re planning a larger project, homeowners often pair a kitchen refresh with a Garage Conversion ADU in Richardson or a New Detached ADU in Richardson for rental or family space, and our Kitchen Remodeling service handles the wider scope when the job grows beyond cabinets and counters.
Get a Free Cabinets & Countertops Estimate in Richardson
Call (833) 954-4985 to schedule your free on-site estimate for cabinets & countertops in Richardson. A live person answers around the clock, and you’ll get upfront pricing with a written line-item quote, plus $1,000 off projects over $10,000 and 0% financing for 18 months if you need it. Your technicians are background-checked and arrive in uniform. Call today.
Written by the team at Groundwork Construction Co.












